BearingIndex
THE BEARINGINDEX DIRECTORY

22209W33 — 45 × 85 × 23 (unit unconfirmed)

HISTORICAL DIMENSION INTERPRETATIONUNIT UNCONFIRMED

The source does not state dimension units. Obtain the offered drawing before using these historical values.

Spherical roller

22209W33

22209W33 is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 45 × 85 × 23 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.

Bore d
45 unit unconfirmed
Outside D
85 unit unconfirmed
Width B
23 unit unconfirmed

Compare the 1 publication

MODEL-SPECIFIC BUYER GUIDE · SOURCES CHECKED 2026-10-09

A W33 marking is not a complete lubrication or sealing specification for Luan 22209W33.

The retained Luan source lists this exact model, but gives no groove/hole drawing, seal specification, lubricant fill or maintenance interval. Its dimension header also omits the unit. Obtain the actual offered drawing and service requirements before planning the housing feed or calling it maintenance-free.

The row is 22209W33 even though the webpage title names 22218CCW33.

Luan’s retained original source table [1] contains an exact 22209W33 row. The webpage’s title is 22218CCW33, and the table covers multiple designations. The row label is the basis for these readings; the title does not add CC or another construction suffix to the smaller bearing.

Archived fieldExact 22209W33 entryEvidence boundary
d / D / B45 / 85 / 23The “Principal dimensions” heading gives no unit. The directory’s historical interpretation is qualified, not confirmed as mm.
Grease / oil speed ratings4000 / 5000 r/minLubrication-labelled reference entries; no particular lubricant system or combined duty is specified.
Dynamic / static ratings52.2 / 73.2 kNThe table labels these basic load ratings, not a permissible working load or a test result.
Reference mass0.58 kgCatalogue reference, not a receiving-inspection tolerance or measured sample weight.

On 2026-10-09 a fresh navigation to the source failed with a certificate-name error. The saved original HTML was reopened locally, its exact row and headings read and its table actually viewed. This is an archival recheck, not a successful live-source refresh, current stock confirmation or certificate verification. No certificate error was bypassed.

Confirm the supplied feature, then connect it to a complete lubrication arrangement.

SKF’s spherical-roller construction guidance [2] uses W33 for an annular groove and three lubrication holes in the outer ring, and distinguishes that feature from seal designations and grease-life conditions. It explains what a groove/holes feature does in a bearing construction; it is not a dimensional drawing or delivery confirmation for Luan’s W33 item.

Ask Luan to identify its actual groove and holes, their position and dimensions, and the supported lubrication route on the offered drawing. Match that drawing to the housing feed and surrounding parts. A grease nipple on a housing is not proof that lubricant reaches the intended bearing passage. If the housing already exists, submit the coordinated section showing where the feed enters and where lubricant returns or purges.

Keep three separate questions in the reply:

  • Feed features: what is supplied on this complete bearing, and how does the proposed housing route reach it?
  • Sealing and contamination control: which bearing or external housing seals are specified for the actual environment?
  • Lubrication and maintenance: what lubricant and initial fill, replenishment method, quantity and interval does Luan approve for the duty?

The W33 text alone does not establish factory grease filling, seal material or a maintenance-free interval. Equally, the examined source’s missing seal field does not prove the delivered assembly has no seals. Obtain the complete offer instead of inferring either outcome from a bare marking.

The 4000/5000 r/min entries do not supply a replenishment schedule or oil-system design. No grease quantity, oil flow, viscosity, interval or sealing test is prescribed here. Keep the maker’s maintenance conditions with the complete part, housing drawing and assessed loads/speeds so the purchase leads to a usable service specification rather than only a bearing number.

What each manufacturer published.

ManufacturerDynamic load rating (kN)Static load rating (kN)Limiting speed — grease (rpm)Limiting speed — oil (rpm)Reference mass (kg)Source recorded
Luan Rolling Bearing
22209W33
52.273.2400050000.582026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

The works that publish 22209W33.

Luan Rolling Bearing

Luan, Anhui, China

Spherical and cylindrical roller bearings

Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.

Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers

168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Luan Rolling Bearing about 22209W33

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.

Ask the manufacturer for these when you enquire.

Request a quote for 22209W33.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Luan Rolling Bearing · 22209W33 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

Sources used for the individual buyer guide

  1. Luan Rolling Bearing · retained multi-model table, 22209W33 row ↗

    Retained original HTML reopened locally and exact row/header visually checked. Fresh navigation on 2026-10-09 failed with certificate-name error; no bypass. Dimension unit absent, speed r/min and load kN explicit. Page title22218CCW33 does not redefine this row.

  2. SKF · lubrication groove/holes and separate sealed designs, printed page 776 ↗

    PDF index777 newly read, rendered and actually viewed, including Fig7. W33 groove/three-hole description distinguished from seal and grease-life conditions. No SKF groove dimensions, grease life, maintenance quantities or interval transferred to Luan.

Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.