The source does not state dimension units. Obtain the offered drawing before using these historical values.
Spherical roller
22210W33
22210W33 is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 50 × 90 × 23 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.
Which lubrication system supports the proposed duty for Luan 22210W33?
Luan’s archived W33 row has the same 3800/4800 r/min grease/oil entries as 22210 and 22210K. The W33 marking does not prove a speed increase. The oil column also does not identify an oil bath, an external pump or the means of removing heat and contaminants. Resolve the system before using the number in an equipment specification.
The W33 row does not publish a higher speed than its neighbours.
The exact retained Luan rows [1] list grease 3800 and oil 4800 r/min for 22210W33, 22210 and 22210K. All three show basic dynamic/static ratings of 52.2/73.2 kN and dimension entries of 50/90/23. The dimension heading gives no unit, so obtain a controlled drawing before treating those entries as mm.
The W33 reference mass is 0.62 kg, compared with 0.87 kg for the plain and K rows. The table does not explain that difference. It is not evidence of lower friction, less heat or a higher permitted speed. Likewise, the separation of grease and oil columns does not identify which oil-delivery or cooling arrangement was used to establish the entry.
Request Luan’s applicable rating basis for the exact offered construction and the proposed duty. State the real operating speed range and loads, including relevant changes, rather than asking only whether the bearing “can reach 4800”. No particular machine duty, lubricant or approved operating speed has been verified in this review.
Specify oil delivery and removal as one arrangement.
SKF’s overview of oil lubrication [2] distinguishes oil bath, self-circulating arrangements, external-pump circulation, oil jet and oil-air. It explains that speed, heat removal and contaminant removal affect the choice. Its diagrams describe different systems; they do not establish that any one is fitted to Luan 22210W33.
Proposed arrangement
Evidence to include in the enquiry
What the catalogue does not answer
Oil bath
Housing section, stationary oil-level provision, orientation and operating conditions.
Applicable level and heat balance for this assembly; the W33 marking does not select them.
External-pump circulation
Coordinated feed and return/drainage, pump, reservoir, filtration and any cooling provision.
Approved oil delivery, pressure/flow and return capacity for the offered bearing and housing.
Another oil method
Identify the actual method and layout instead of submitting a generic “oil lubricated” description.
Its applicability and design criteria; do not copy a jet or oil-air setting from another bearing.
SKF’s circulation discussion specifically calls for drainage that prevents an oil-level build-up. Use that as a design question for the coordinated assembly: where does supplied oil go after passing the bearing, and can the proposed return arrangement handle the assessed conditions? Do not infer an oil flow, pressure, viscosity or drainage dimension here. A feed feature alone cannot answer the return or heat-removal question.
Have Luan confirm the actual groove/hole feature on its offered drawing. Submit that drawing with the housing layout to the responsible equipment designer. The W33 text is not a complete oil-system drawing, seal specification or assurance that circulating oil reaches all required surfaces.
Agree what will be checked at commissioning before approving the purchase.
Ask the maker and equipment designer to identify the conditions covered by their approval and the commissioning record required by the machine procedure: the supplied oil and its condition, delivery and return behaviour, operating speed/load and bearing-position temperature as applicable. They must define acceptable results for the actual arrangement. No commissioning limits or successful measurements are supplied on this page.
Keep the lubricant supplier’s product information, Luan’s bearing assessment and the equipment designer’s system specification tied to the same proposal. A catalogue speed entry cannot replace those three responsibilities. If the plan changes from oil bath to circulation, have the changed arrangement reviewed instead of assuming the same entry approves it automatically.
The original Luan HTML was saved during an earlier capture, reopened and its exact rows and unit headings actually viewed. A fresh source navigation on 2026-10-09 failed with a certificate-name error. These are archival reference entries, not current stock or a newly issued machine approval. SKF’s system guidance supplies background only; no SKF oil level, jet velocity, oil-change interval or numerical design criterion is transferred to Luan.
A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.
Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.
Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers
168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08
Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.
Ask the manufacturer for these when you enquire.
Request a quote for 22210W33.
Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.
Original archived rows and headings read and visually checked. Speed entries equal across plain/K/W33; differing mass not explained. Dimension unit absent. Fresh navigation on 2026-10-09 failed certificate-name error.
PDF index123 newly read, rendered and actually viewed; method distinctions, heat/contaminant removal and drainage used as design questions. No SKF operating limit, level, jet setting or oil-change interval assigned to Luan.
Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.
We use cookies and analytics to operate this website and measure visits. Form contents and private workspace pages are excluded from analytics. Privacy & cookies