BearingIndex
THE BEARINGINDEX DIRECTORY

22212 — 60 × 110 × 28 (unit unconfirmed)

HISTORICAL DIMENSION INTERPRETATIONUNIT UNCONFIRMED

The source does not state dimension units. Obtain the offered drawing before using these historical values.

Spherical roller

22212

22212 is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 60 × 110 × 28 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.

Bore d
60 unit unconfirmed
Outside D
110 unit unconfirmed
Width B
28 unit unconfirmed

Compare the 1 publication

MODEL-SPECIFIC BUYER GUIDE · SOURCES CHECKED 2026-10-09

A search for 22212 can return a different complete bearing specification.

The reviewed Luan record is plain 22212. One official NSK result is 22212EAE4C4, with explicitly stated construction and clearance. Keep those full identities attached to their values: matching the numeric prefix is not a replacement approval, and the NSK suffix does not fill gaps in Luan’s record.

Two publications contain the same three numbers but describe separately named parts.

Luan’s exact retained 22212 row [1] and NSK’s live 22212EAE4C4 detail [2] provide the following readings. NSK is a documented comparison here, not another supplier listed for Luan’s directory record or a confirmed available replacement.

FieldLuan 22212, retained tableNSK 22212EAE4C4, exact detail
d / D / B60 / 110 / 28; unit unstated60 / 110 / 28 mm
Dynamic rating81.8 kN178000 N = 178 kN
Static rating112 kN174000 N = 174 kN
Bore / cageNot specified by the examined rowCylindrical bore / pressed steel cage
Clearance / toleranceNot specified by the examined rowC4 / P0
Reference mass1.22 kgApproximately 1.1 kg

The N-to-kN conversions divide by 1000; they do not change the maker or rating basis. The different dynamic/static figures are not a comparative test or a service-life result. They must remain attached to their respective complete constructions.

Luan’s missing dimension unit cannot be confirmed by NSK’s mm heading. Obtain Luan’s offered drawing before treating the apparent numerical match as a verified envelope match. Even after that check, bore form, internal construction, clearance and rating basis still need separate assessment. NSK’s C4 and pressed steel cage are not properties of the plain Luan record.

Copy the full part number and the field definition into the comparison.

The examined NSK detail identifies 22212EAE4C4 in both the heading and parts-number field, and its properties explicitly show C4. If that result appears during a search for the shorter number, retain the longer identity in the enquiry. Do not shorten it to “22212” and leave its clearance class implicit.

The NSK speed section also uses four different labels: thermal speed rating with an oil-bath basis, mechanical speed with controlled forced-circulation oil, grease, and oil bath. Luan’s archive gives only grease/oil entries of 3200/4000 r/min. Selecting the largest number from the other publication would lose both the construction and the lubrication definition. This page does not assign NSK’s speeds or its ISO-related thermal conditions to Luan.

Request a comparison of the exact offered candidates against the machine requirements:

  1. Preserve each maker and full designation on its own line, with the document revision and any additional suffixes.
  2. Confirm the actual units, bore form, shoulder/interface drawing and complete delivered construction for each.
  3. Identify the initial clearance range and assess the proposed fits and thermal conditions, rather than accepting a C4 entry copied from another maker’s page.
  4. Use each candidate’s own rating and lubrication basis for the actual load/speed case, and obtain the responsible replacement assessment.

A proposal should identify which candidate was assessed and which differences were accepted. Neither this numerical comparison nor the search result itself authorises replacing an installed bearing. No interchangeable-part approval, measured sample or machine test has been obtained.

The Luan original HTML was retained from an earlier capture and its exact row/header reopened and actually viewed. Fresh navigation on 2026-10-09 failed with a certificate-name error. The NSK source was accessed successfully on that date after its old OSS address redirected to NSK’s engineering site; its exact part and property table were read and visually checked. Those are different source states, and neither establishes current stock.

What each manufacturer published.

ManufacturerDynamic load rating (kN)Static load rating (kN)Limiting speed — grease (rpm)Limiting speed — oil (rpm)Reference mass (kg)Source recorded
Luan Rolling Bearing
22212
81.8112320040001.222026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

The works that publish 22212.

Luan Rolling Bearing

Luan, Anhui, China

Spherical and cylindrical roller bearings

Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.

Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers

168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Luan Rolling Bearing about 22212

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.

Ask the manufacturer for these when you enquire.

Request a quote for 22212.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Luan Rolling Bearing · 22212 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

Sources used for the individual buyer guide

  1. Luan Rolling Bearing · retained exact 22212 row ↗

    Exact row/header in original saved HTML read and actually viewed: 60/110/28 with unit absent; 81.8/112 kN, 3200/4000 r/min and 1.22 kg. Fresh navigation failed with a certificate-name error on 2026-10-09.

  2. NSK · exact 22212EAE4C4 product detail ↗

    Live detail read and actually viewed after official OSS redirect. Complete part, mm dimensions, N ratings, cylindrical bore, pressed steel cage, C4/P0 and approximate mass checked. All values remain attributed to NSK; no replacement approval or Luan property inferred.

Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.