BearingIndex
THE BEARINGINDEX DIRECTORY

22213 — 65 × 120 × 31 (unit unconfirmed)

HISTORICAL DIMENSION INTERPRETATIONUNIT UNCONFIRMED

The source does not state dimension units. Obtain the offered drawing before using these historical values.

Spherical roller

22213

22213 is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 65 × 120 × 31 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.

Bore d
65 unit unconfirmed
Outside D
120 unit unconfirmed
Width B
31 unit unconfirmed

Compare the 1 publication

MODEL-SPECIFIC BUYER GUIDE · SOURCES CHECKED 2026-10-09

The 22213 number alone does not identify the cage or its temperature conditions.

Luan’s retained 22213 row gives load, speed and mass entries but no cage material or operating-temperature range. NTN’s separately named 22213EX2 has those fields. Use that exact comparison to identify what an offer must resolve; do not transfer NTN’s construction or temperature range to Luan.

Keep the NTN EX2 construction attached to its own part number.

The retained Luan row [1] is plain 22213. The live NTN detail [2] is 22213EX2. The following comparison describes publications, not tested interchangeability or available inventory.

FieldLuan 22213NTN 22213EX2
d / D / B65 / 120 / 31; unit unstated65 / 120 / 31 mm
Dynamic / static rating88.5 / 128 kN226 / 224 kN
Grease / oil limiting entries2800 / 3600 r/min4400 / 5500 RPM
CageNot specified by the examined rowFiber-glass-reinforced nylon
Clearance / ring / enclosureNot specified by the examined rowCN / plain ring / open
Reference mass1.63 kg1.430 kg
Published temperature fieldNot specified by the examined row−40 to 200 °C

The missing Luan dimension unit prevents declaring a verified envelope match from these numbers. NTN’s mm heading cannot supply it. The different ratings, speeds and masses belong to different complete records; they are not comparative endurance results. Neither CN nor the nylon cage has been established for Luan.

A temperature field needs the cage, lubricant and duration behind it.

NTN’s exact EX2 page displays both its nylon cage and the −40 to 200 °C range. It does not name the nylon grade or explain continuous exposure, lubricant chemistry or the basis of the upper endpoint in the examined fields. Those unanswered conditions matter before treating the endpoint as continuous-duty approval.

NTN’s Ball and Roller Bearings manual [3], printed A-131, discusses resin cage selection and the potential deterioration of polyamide properties at high temperature with certain sulfur- or phosphorus-type extreme-pressure additives. Printed A-144 distinguishes resin grades in its representative materials table. That is material guidance, not the exact EX2 cage specification.

In particular, a general polyamide table does not prove that EX2 uses PA66, and it does not establish a replacement limit for this part. Conversely, the exact product’s temperature field does not settle all material and lubricant combinations. No contradiction has been resolved by testing or an NTN engineering response here.

For an EX2 proposal, retain the exact part-page temperature entry and ask NTN or its responsible technical channel for the approved continuous and transient conditions with the actual lubricant and duty. For a Luan proposal, obtain Luan’s own cage specification and conditions first. Do not copy either the EX2 endpoint or a generic resin-table temperature into Luan’s order.

Give the maker a temperature case it can actually assess.

A useful technical request separates the machine environment from the bearing’s operating condition:

  1. Identify the location and duration. State whether a temperature is ambient, housing surface, lubricant or an estimate at the bearing. Separate steady running, startup and short peaks; report the observation method and uncertainty.
  2. Name the lubricant. Provide its exact product, lubrication method and available additive information. Obtain compatibility confirmation for the delivered cage material; a generic “high-temperature grease” description is insufficient.
  3. Attach the mechanical duty. Include simultaneous radial/axial load cases, speeds, fits and clearance assumptions. Do not combine one publication’s speed limit with another publication’s cage or temperature endpoint.
  4. Request an explicit assessed configuration. The reply should name the full bearing code, cage, ring treatment where relevant, lubricant and continuous/transient conditions. Record any required change of construction or operating condition before accepting substitution.

No cage grade, lubricant approval, thermal trial or combined-duty approval has been obtained for Luan 22213. This page supplies the documented comparison and the unresolved decision points, not a new temperature rating.

Luan’s original saved HTML was reopened and its exact row and headers actually viewed. Fresh access on 2026-10-09 failed with a certificate-name error; this is an archive recheck, not a newly fetched Luan specification. NTN’s exact EX2 page was read and visually checked on that date. The linked ULTAGE catalogue was unavailable during this review; it was not used to establish EX2 conditions.

What each manufacturer published.

ManufacturerDynamic load rating (kN)Static load rating (kN)Limiting speed — grease (rpm)Limiting speed — oil (rpm)Reference mass (kg)Source recorded
Luan Rolling Bearing
22213
88.5128280036001.632026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

The works that publish 22213.

Luan Rolling Bearing

Luan, Anhui, China

Spherical and cylindrical roller bearings

Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.

Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers

168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Luan Rolling Bearing about 22213

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.

Ask the manufacturer for these when you enquire.

Request a quote for 22213.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Luan Rolling Bearing · 22213 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

Sources used for the individual buyer guide

  1. Luan Rolling Bearing · retained exact 22213 row ↗

    Exact row and headers in original saved HTML read and actually viewed: 65/120/31 with no dimension unit, 2800/3600 r/min, 88.5/128 kN and 1.63 kg. Fresh access failed with a certificate-name error on 2026-10-09.

  2. NTN · exact 22213EX2 product detail ↗

    Live exact item read and actually viewed: reinforced nylon cage, CN, plain ring, open construction, mm dimensions, ratings, speeds, mass and temperature field. No nylon grade or combined-duty approval inferred.

  3. NTN · Ball and Roller Bearings, catalogue 2203/E ↗

    PDF pages 69 and 76, printed A-130/A-131 and A-144/A-145, read, rendered and actually viewed. Resin cage material and lubricant compatibility context; representative material table is not an EX2 grade or part-specific operating limit.

Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.