BearingIndex
THE BEARINGINDEX DIRECTORY

22213W33 — 65 × 120 × 31 (unit unconfirmed)

HISTORICAL DIMENSION INTERPRETATIONUNIT UNCONFIRMED

The source does not state dimension units. Obtain the offered drawing before using these historical values.

Spherical roller

22213W33

22213W33 is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 65 × 120 × 31 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.

Bore d
65 unit unconfirmed
Outside D
120 unit unconfirmed
Width B
31 unit unconfirmed

Compare the 1 publication

MODEL-SPECIFIC BUYER GUIDE · SOURCES CHECKED 2026-10-09

For 22213W33, check how the housing feed reaches the actual bearing groove.

Luan’s retained 22213W33 row does not include an oil-groove drawing. NTN’s separately named 22213EAX1W33 publishes groove and hole dimensions. Those details illustrate what an interface review needs, but they cannot size Luan’s bearing or the machine’s lubricant feed.

The three envelope numbers do not describe the lubricant interface.

The retained Luan 22213W33 row [1] gives 65/120/31 with no dimension unit stated, 2800/3600 r/min grease/oil entries, dynamic/static ratings of 88.5/128 kN and reference mass 1.6 kg. There is no groove width, hole diameter, feed location or housing section in that examined row.

The exact NTN 22213EAX1W33 page and linked dimension diagram [2] show additional fields. In that NTN example, W0 identifies the outer-ring groove width and d0 the hole diameter. They are different features, even though both are lengths.

FeatureNTN 22213EAX1W33 exampleLuan 22213W33 source state
Bearing envelope d / D / B65 / 120 / 31 mm65 / 120 / 31; unit unstated
Groove width W08 mmNot provided by the examined row
Hole diameter d03.5 mmNot provided by the examined row
Outer-ring featureRelube in the exact item detailRequires offered construction drawing

Neither 8 mm nor 3.5 mm is a Luan dimension. The diagram is a dimensional illustration, not an assembly approval; it does not provide the machine’s port position, housing tolerance, lubricant flow or pressure setting. Do not infer a hole count or an approved housing feed arrangement from one sectional view.

Ask for a section that follows the feed path through the assembled position.

If the proposed installation feeds lubricant through the housing toward the outer ring, request an interface drawing showing both parts. A bearing supplier’s groove drawing alone cannot show whether the housing passage communicates with it after assembly.

  1. Locate the bearing. Show the assembled axial position, locating surfaces and relevant permitted movement. Identify the groove reference from the bearing’s controlled drawing rather than guessing its location from the overall width.
  2. Locate the housing passage. Show where the passage opens relative to that groove, including the drawing dimensions and tolerances needed to assess communication. Confirm who owns the housing drawing and the interface review.
  3. Follow the complete path. Identify intended supply and discharge or redistribution routes for the selected lubrication method, and any seals or adjacent parts affecting them. A route intended for oil circulation is not automatically a grease replenishment design.
  4. Agree how to verify it. Record maker-agreed assembly and passage checks and the responsible reviewer. Keep geometry checks separate from lubricant quantity, pressure, flow and replenishment criteria, which need their own application assessment.

For example, an offer listing only “22213W33, 65/120/31” leaves two distinct issues open: Luan’s own units and bearing features, and how those features meet the housing feed. A proposal that merely adds NTN’s W0 and d0 values does not resolve either issue for the Luan part.

The final review should identify the exact delivered bearing and housing revisions, the lubrication method and any unresolved conditions. If another maker is proposed, retain that maker’s full designation and interface drawing. Do not mark a substitution approved merely because its groove-related suffix looks familiar.

Luan’s exact row and headers were reopened and actually viewed in saved original HTML. Fresh access on 2026-10-09 failed with a certificate-name error. NTN’s exact item and linked dimension diagram were accessed, read and actually viewed on that date. No Luan sample, housing drawing, flow test or approved lubrication setting has been obtained.

What each manufacturer published.

ManufacturerDynamic load rating (kN)Static load rating (kN)Limiting speed — grease (rpm)Limiting speed — oil (rpm)Reference mass (kg)Source recorded
Luan Rolling Bearing
22213W33
88.5128280036001.62026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

The works that publish 22213W33.

Luan Rolling Bearing

Luan, Anhui, China

Spherical and cylindrical roller bearings

Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.

Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers

168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Luan Rolling Bearing about 22213W33

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.

Ask the manufacturer for these when you enquire.

Request a quote for 22213W33.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Luan Rolling Bearing · 22213W33 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

Sources used for the individual buyer guide

  1. Luan Rolling Bearing · retained exact 22213W33 row ↗

    Exact original saved row/header read and actually viewed: unit unstated, no groove/hole or housing drawing; stated speed/load/mass fields retained. Fresh certificate-name failure on 2026-10-09; archive recheck only.

  2. NTN · exact 22213EAX1W33 item and linked dimension diagram ↗

    Live exact item, mm dimension fields and linked original 1111_S diagram read and actually viewed. W0 groove width and d0 hole diameter are NTN-specific; no Luan geometry, hole count, housing match or lubricant setting inferred.

Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.