BearingIndex
THE BEARINGINDEX DIRECTORY

22214 — 70 × 125 × 31 (unit unconfirmed)

HISTORICAL DIMENSION INTERPRETATIONUNIT UNCONFIRMED

The source does not state dimension units. Obtain the offered drawing before using these historical values.

Spherical roller

22214

22214 is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 70 × 125 × 31 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.

Bore d
70 unit unconfirmed
Outside D
125 unit unconfirmed
Width B
31 unit unconfirmed

Compare the 1 publication

MODEL-SPECIFIC BUYER GUIDE · SOURCES CHECKED 2026-10-09

A higher published 22214 speed needs its load and lubrication basis.

Luan’s archived 22214 row lists 2600/3400 r/min for grease/oil. NTN’s separately named 22214EAD1 has larger catalogue entries and an explicitly described ULTAGE speed basis. Read those conditions before comparing the figures; neither the largest number nor the lubrication label approves a machine speed.

Attach the reference conditions to the complete catalogue entry.

The exact retained Luan 22214 row [1] records 70/125/31 with unit unstated, dynamic/static ratings 95/142 kN and reference mass 1.66 kg. The examined row gives the grease/oil speed pair but does not describe a load fraction, lubricant grade, supply condition or temperature criterion behind it.

NTN’s 2203/E catalogue [2], printed B-220, separately identifies 22214EAD1 as a cylindrical-bore ULTAGE entry. Its speeds are 4100/5200 min⁻¹ for grease/oil. The ULTAGE definition on printed B-215 gives the following context:

NTN catalogue referenceGrease basisOil basis
Lubricant / supplyLithium-based grease, NLGI 3; 20–30% of bearing free spaceRoom-temperature VG32 spindle oil supplied at 1 litre/min
Operating load basis5% of basic static load rating C0r5% of basic static load rating C0r
Temperature criterionOuter ring reaches 80 °COuter ring reaches 80 °C

These are NTN’s catalogue reference conditions, not lubricant selections, fill quantities, flow settings or alarm temperatures for the buyer’s machine. They are not Luan conditions either. The source separately says temperature rise changes with the actual load, speed pattern and lubrication conditions.

NTN’s mm dimensions for its own entry cannot confirm Luan’s missing unit. Matching the numerical envelope would still not establish identical construction, speed definitions or thermal behaviour. This comparison is not a measured speed trial or a replacement approval.

Give the supplier the operating cycle, not only the maximum rpm.

If the machine requires operation near a published figure, attach a duty table showing startup, normal running, peaks and their durations. Include the corresponding radial/axial bearing reactions, actual lubrication method and thermal environment. A single maximum rpm cannot represent all those states.

Ask the responsible maker to identify which offered bearing and published limit it has assessed, explain any difference from its reference conditions, and state the permitted operation and restrictions. For Luan 22214, obtain the missing basis of its 2600/3400 r/min entries rather than substituting NTN’s conditions.

NTN’s cited ULTAGE guidance also directs users to NTN Engineering when exceeding 80% of its catalogue allowable speed or when vibration/impact conditions apply. That is an NTN consultation trigger, not an automatic pass below 80%, and it cannot become a universal limit for Luan. No derived threshold is supplied here.

Before commissioning, agree the assessed bearing/lubricant combination, supply arrangement, inspection points and response criteria with the responsible equipment and bearing specialists. Record actual observations against that agreed case. Copying the catalogue’s 80 °C reference criterion as an alarm setting, or its 1 litre/min reference supply as a machine flow setting, would skip that assessment.

Neither the Luan catalogue number nor the larger NTN figure establishes life, efficiency or a guaranteed production rate. No application-specific temperature test, speed approval or lubricant recommendation has been obtained for Luan 22214.

Luan’s exact saved row/header was read and actually viewed; fresh access on 2026-10-09 failed with a certificate-name error. NTN’s exact 22214 row and ULTAGE definition pages were read, rendered and actually viewed in its official PDF. The archive recheck and the catalogue review do not establish current stock or delivered condition.

What each manufacturer published.

ManufacturerDynamic load rating (kN)Static load rating (kN)Limiting speed — grease (rpm)Limiting speed — oil (rpm)Reference mass (kg)Source recorded
Luan Rolling Bearing
22214
95142260034001.662026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

The works that publish 22214.

Luan Rolling Bearing

Luan, Anhui, China

Spherical and cylindrical roller bearings

Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.

Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers

168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Luan Rolling Bearing about 22214

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.

Ask the manufacturer for these when you enquire.

Request a quote for 22214.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Luan Rolling Bearing · 22214 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

Sources used for the individual buyer guide

  1. Luan Rolling Bearing · retained exact 22214 row ↗

    Exact saved row/header read and actually viewed: 70/125/31 unit unstated; 2600/3400 r/min, 95/142 kN and 1.66 kg. Speed basis absent from examined row. Fresh certificate-name failure on 2026-10-09.

  2. NTN · 2203/E, exact 22214 entry and ULTAGE speed definition ↗

    PDF pages 209 and 206, printed B-220/B-221 and B-214/B-215, read, rendered and actually viewed. Exact 22214EAD1 entry, ULTAGE reference conditions and consultation guidance; no Luan limit, machine setting or tested replacement inferred.

Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.