BearingIndex
THE BEARINGINDEX DIRECTORY

22214W33 — 70 × 125 × 31 (unit unconfirmed)

HISTORICAL DIMENSION INTERPRETATIONUNIT UNCONFIRMED

The source does not state dimension units. Obtain the offered drawing before using these historical values.

Spherical roller

22214W33

22214W33 is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 70 × 125 × 31 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.

Bore d
70 unit unconfirmed
Outside D
125 unit unconfirmed
Width B
31 unit unconfirmed

Compare the 1 publication

MODEL-SPECIFIC BUYER GUIDE · SOURCES CHECKED 2026-10-09

The W33 text does not choose the cage in a 22214 cross-reference.

NTN’s official interchange guide separates steel and brass retainers into different tables, and both straight-bore 22214 entries contain W33 and C3. Luan’s shorter 22214W33 row does not state a cage or clearance class. Choose a documented complete candidate, not a shortened suffix match.

The same base number appears in two different retainer tables.

The retained Luan 22214W33 row [1] records 70/125/31 with the dimension unit unstated, grease/oil entries 2600/3400 r/min, dynamic/static ratings 95/142 kN and reference mass 1.7 kg. The examined row does not specify the cage or clearance class.

In NTN’s ULTAGE interchange guide [2], printed pages 6–7 and 10–11, the straight-bore 22214 entries belong to separate retainer tables:

Guide categoryComplete NTN entryWhat must remain in the proposal
Steel retainer, straight bore22214EAW33C3Steel-retainer category, straight bore and complete C3-containing designation
Brass retainer, straight bore22214EMW33C3Brass-retainer category, straight bore and complete C3-containing designation
Luan examined record22214W33Cage and clearance require Luan’s own offered specification

The NTN publication is an interchange guide for its listed constructions. Its table heading is part of the evidence, not a decoration. Neither NTN entry can be shortened to “22214W33” while preserving all of that identity. The two W33-containing entries show why W33 alone does not select the retainer category in this guide.

Luan is not a maker column in the examined tables. Finding the same base number there does not insert Luan into the guide or establish its steel/brass cage, C3 clearance or verified interchangeability. NTN’s 70 mm bore heading also cannot confirm the missing unit in Luan’s own archive.

Ask what changes, and what was assessed, before accepting the candidate.

Keep the currently required bearing and each offered candidate on separate lines. For each, record the maker, full code, cage material/construction, bore form, clearance and lubrication features from its own controlled documentation. Mark an unresolved field as a question rather than completing it from another maker’s code.

If a seller proposes either NTN guide entry for a Luan enquiry, retain the steel/brass table category and request the actual current NTN part document. Obtain Luan’s offered construction before comparing the difference. The guide accessed in this review is a published reference, not a new confirmation of a delivered part or its present specification.

The technical assessment should address the machine’s actual loads, speed cycle, lubrication, temperature, fits and operating clearance. Include vibration or shock conditions if they exist. A brass cage is not automatically the correct choice merely because the application sounds severe; a steel entry is not automatically acceptable because the envelope appears familiar. No comparative cage test or application approval is provided here.

Require the proposal to state which complete configuration was assessed, which construction differences were accepted and who made that assessment. Carry the agreed full designation and document revision into the order, receiving checks and replacement record. Do not let a quotation or label omit the cage/clearance information that was material to the decision.

Luan’s exact saved row/header was read and actually viewed; fresh access on 2026-10-09 failed with a certificate-name error. NTN’s official PDF was downloaded and both exact straight-bore rows and category headings read, rendered and actually viewed. No Luan cage confirmation, clearance approval, delivered sample or cross-maker test has been obtained.

What each manufacturer published.

ManufacturerDynamic load rating (kN)Static load rating (kN)Limiting speed — grease (rpm)Limiting speed — oil (rpm)Reference mass (kg)Source recorded
Luan Rolling Bearing
22214W33
95142260034001.72026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

The works that publish 22214W33.

Luan Rolling Bearing

Luan, Anhui, China

Spherical and cylindrical roller bearings

Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.

Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers

168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Luan Rolling Bearing about 22214W33

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.

Ask the manufacturer for these when you enquire.

Request a quote for 22214W33.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Luan Rolling Bearing · 22214W33 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

Sources used for the individual buyer guide

  1. Luan Rolling Bearing · retained exact 22214W33 row ↗

    Exact original saved row/header read and actually viewed: unit unstated, no cage/clearance field in examined row; published speed/load/mass entries retained. Fresh certificate-name failure on 2026-10-09; archive recheck only.

  2. NTN · ULTAGE spherical roller interchange guide, straight-bore retainer tables ↗

    PDF pages 4 and 6, printed 6–7 and 10–11, read, rendered and actually viewed. Exact 22214EAW33C3 and 22214EMW33C3 entries with distinct steel/brass table headings. Published NTN guide, not a Luan construction record, current stock claim or application-specific replacement approval.

Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.