The source does not state dimension units. Obtain the offered drawing before using these historical values.
Spherical roller
22215K
22215K is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 75 × 130 × 31 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.
For 22215K, approve the complete mounting set before ordering the accessories.
Luan’s retained 22215K row gives no adapter or locking-component pairing. An exact NTN catalogue example distinguishes a narrow-slit adapter and straight inner-tab washer. Use that example to ask for a documented Luan assembly, rather than buying loose accessories by a shared number.
The catalogue pairing includes a construction detail, not only a size number.
The exact Luan 22215K row [1] records 75/130/31 with no dimension unit, 2400/3200 r/min grease/oil entries, 95/142 kN dynamic/static ratings and 1.75 kg reference mass. It names no sleeve, locknut, washer or locking method. None of those missing parts is supplied by the designation alone.
In NTN’s 2203/E catalogue [2], printed B-240, the separately designated 22215EAKD1 is listed with H315X. That assembly’s shaft-diameter field d1 is 65 mm. The page’s note states that its X adapters have narrow slits and use washers with straight inner tabs. Keep that note with the pairing.
NTN’s printed D-12/D-13 drawings distinguish bent and straight inner tabs. The table lists AW15 as the bent-inner-tab version and AW15X as the straight-inner-tab version, alongside AN15. Printed D-2 lists AN15 with an M75 × 2 thread and explains that the straight-tab X washer can also be used in its stated catalogue context. These linked entries describe NTN accessories; they do not establish Luan compatibility.
NTN catalogue fact
Question to resolve for the offered Luan assembly
22215EAKD1 is paired with H315X
Which complete sleeve is approved for the delivered Luan 22215K bore and actual shaft? Obtain the assembly drawing, not a bare cross-reference.
H315X is a narrow-slit adapter requiring a straight inner-tab washer
What slit and washer-tab geometry does the offered set use? Retain the exact accessory suffixes and confirm the locking interface.
AW15 and AW15X have different inner-tab forms
Does the quotation and packing list identify the actual washer construction? A shortened “15 washer” description loses this distinction.
The adapter example has d1 = 65 mm; AN15 has an M75 × 2 thread
Identify shaft diameter and nut thread separately on the actual assembly. A thread designation is not a shaft-size approval.
This is a maker-specific illustration of the information an accessory specification needs. H315X, AN15 and AW15X have not been approved for Luan 22215K here. Neither NTN’s dimensions nor its X meaning confirms Luan’s dimension unit, suffix definitions or locking system.
Make substitution and receiving decisions against one approved assembly.
Ask the bearing supplier and responsible designer to identify the actual mounting route first. If an adapter is used, request a bill of materials naming the bearing, sleeve, nut and washer with complete designations and manufacturers. Attach the controlled assembly drawing and applicable mounting procedure. A quote for the bearing only should explicitly identify which accessories remain to be supplied.
If a seller proposes a substitute washer or sleeve, ask for the documented interface match before accepting it. Compare the inner-tab/slit arrangement, thread and other relevant drawing features as an assembly. Do not file a substitution under “same nominal size” while omitting a construction suffix. Photos can identify what was delivered, but they cannot establish unmeasured tolerances or replace the approved drawing.
At receiving, reconcile every accessory against that bill of materials, keep its markings and supplied documentation with the bearing record, and resolve missing or ambiguous parts before mounting. Have the qualified installer follow the delivered set’s procedure and record its required clearance and locking checks. This page gives no tightening torque, bending instruction, drive-up setting or permission to reuse a washer; obtain those criteria from the actual supplier and mounting procedure.
Luan’s saved exact row and headers were read and actually viewed; fresh access on 2026-10-09 failed with a certificate-name error. NTN’s adapter, nut and washer pages were read, rendered and actually viewed together. No Luan accessory set has been inspected, purchased or approved in this review.
A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.
Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.
Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers
168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08
Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.
Ask the manufacturer for these when you enquire.
Request a quote for 22215K.
Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.
Original saved exact row/header read and actually viewed; dimension unit and accessory pairing absent. Fresh certificate-name failure on 2026-10-09; archive recheck only.
PDF pages 219, 272 and 277, printed B-240/B-241, D-2/D-3 and D-12/D-13, read, rendered and actually viewed. Exact 22215EAKD1/H315X pairing, narrow-slit note, AN15 thread and AW15/AW15X inner-tab distinction. NTN-specific background, not approval of a Luan accessory set.
Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.
We use cookies and analytics to operate this website and measure visits. Form contents and private workspace pages are excluded from analytics. Privacy & cookies