BearingIndex
THE BEARINGINDEX DIRECTORY

22215W33 — 75 × 130 × 31 (unit unconfirmed)

HISTORICAL DIMENSION INTERPRETATIONUNIT UNCONFIRMED

The source does not state dimension units. Obtain the offered drawing before using these historical values.

Spherical roller

22215W33

22215W33 is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 75 × 130 × 31 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.

Bore d
75 unit unconfirmed
Outside D
130 unit unconfirmed
Width B
31 unit unconfirmed

Compare the 1 publication

MODEL-SPECIFIC BUYER GUIDE · SOURCES CHECKED 2026-10-09

A 22215W33 order still needs a lubrication supply and maintenance specification.

The Luan table identifies 22215W33 but states no grease product, initial fill or maintenance interval. NTN’s separate 22215EAW33 listing shows that a relubrication feature can coexist with an open enclosure. Do not let a lubrication-related suffix stand in for those missing delivery and operating requirements.

Keep the ring feature separate from the delivered lubricant state.

The exact saved Luan 22215W33 row [1] records 75/130/31 without a dimension unit, 2400/3200 r/min grease/oil entries, 95/142 kN dynamic/static ratings and 1.8 kg reference mass. It does not state an enclosure, factory grease fill, lubricant identity or replenishment interval.

The live NTN 22215EAW33 listing [2] separately labels Ring Modification: Relube and Enclosure: Open. Those are distinct fields on one complete NTN designation. A relubrication feature therefore does not, by itself, demonstrate a sealed grease-filled construction or remove maintenance requirements.

This example does not identify Luan’s enclosure or delivered lubricant. Ask Luan what is supplied with its exact 22215W33 offer, which features its suffix denotes, and which initial lubrication work remains with the installer. A seller’s “maintenance-free” statement needs a stated construction and operating basis; the examined Luan row does not support that promise.

Specify what is present at delivery and what must be added before operation.

NTN’s general grease discussion [3], printed A-112, distinguishes grease-filled sealed/shielded bearings from unsealed bearings whose bearing and housing need suitable filling and periodic replenishment or replacement. It does not give a Luan 22215W33 delivery condition.

Unresolved item in this offerInformation needed for the lubrication handover
Lubricant supplied with the bearingGet the maker’s stated lubricant or protective treatment and its intended handling. Do not identify an unknown material by appearance.
Initial operating fillName the approved lubricant, quantity or method, relevant procedure and person responsible. A grease-speed catalogue entry is not a filling instruction.
Housing contributionDocument the actual housing sealing and lubrication supply arrangement. A bearing suffix does not specify the surrounding housing.
Later replenishment or changeoverIdentify the lubricant already present, the proposed replacement and the approved changeover method. Do not substitute a colour or generic NLGI grade for product identity.

Printed A-113 explains that grease properties depend on base oil, thickener and additives, that performance can differ between brands, and that mixing different greases can change their characteristics. Its general warning against mixing brands is relevant when the factory fill and the site grease differ. Obtain compatibility and changeover guidance for the actual products; matching a broad thickener description is not documented approval of this particular mixture.

Request an assessed replenishment interval rather than decoding one from W33.

NTN’s printed A-118 [3] says replenishment intervals depend on bearing type and dimensions, operating speed, temperature and grease. Its reference chart is for standard grease under normal conditions, and it directs ULTAGE interval enquiries to NTN Engineering. The worked example on the facing page concerns a 6206 ball bearing, not this Luan spherical roller designation.

No interval in hours is calculated here. Luan’s unit-unconfirmed dimensions and catalogue speed pair cannot provide the actual speed, operating temperature, chosen grease or machine conditions. Give the responsible supplier or lubrication engineer that operating case and obtain the initial quantity, replenishment quantity/method and interval with their assumptions. Record who maintains the installed arrangement and how changes in duty or lubricant will be reviewed.

Luan’s original saved row/header was reviewed; fresh access on 2026-10-09 failed with a certificate-name error. NTN’s current complete-part fields and the cited catalogue pages were read and visually checked. No grease compatibility test, installed lubrication assessment or maintenance-free approval has been obtained.

What each manufacturer published.

ManufacturerDynamic load rating (kN)Static load rating (kN)Limiting speed — grease (rpm)Limiting speed — oil (rpm)Reference mass (kg)Source recorded
Luan Rolling Bearing
22215W33
95142240032001.82026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

The works that publish 22215W33.

Luan Rolling Bearing

Luan, Anhui, China

Spherical and cylindrical roller bearings

Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.

Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers

168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Luan Rolling Bearing about 22215W33

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.

Ask the manufacturer for these when you enquire.

Request a quote for 22215W33.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Luan Rolling Bearing · 22215W33 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

Sources used for the individual buyer guide

  1. Luan Rolling Bearing · retained exact 22215W33 row ↗

    Original saved exact row/header read and actually viewed. Dimension unit, enclosure, grease supply and interval absent. Fresh certificate-name failure on 2026-10-09; archive recheck only.

  2. NTN · live complete 22215EAW33 listing ↗

    Live exact page read and Relube/Open fields actually viewed on 2026-10-09. Separate NTN construction illustrating distinct fields; no enclosure, grease fill or operating approval transferred to Luan.

  3. NTN · 2203/E, grease supply, mixing and replenishment context ↗

    PDF pages 60 and 63, printed A-112/A-113 and A-118/A-119, read, rendered and actually viewed. General unsealed-bearing lubrication, grease-property/mixing qualifications and interval inputs. No Luan grease product, mixture approval, fill percentage or interval supplied.

Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.