The source does not state dimension units. Obtain the offered drawing before using these historical values.
Spherical roller
22216K
22216K is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 80 × 140 × 33 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.
A proposed withdrawal-sleeve assembly for 22216K needs a removal plan as well as a mounting plan.
Luan’s retained row does not identify a sleeve or removal accessory. NTN’s separate 22216EAKD1/AH316 entry explicitly identifies a nut for disassembly and a reference dimension before sleeve attachment. Those details show why a catalogue accessory list cannot be read as a complete installed or service arrangement.
The AH316 example labels when its nut and reference dimension apply.
The exact saved Luan 22216K row [1] records 80/140/33 without a dimension unit, 2200/3000 r/min grease/oil entries, 115/180 kN dynamic/static ratings and 2.2 kg reference mass. It gives no withdrawal-sleeve pairing or removal instruction. A withdrawal sleeve is only a proposed mounting route here, not a documented Luan configuration.
NTN’s 2203/E withdrawal-sleeve table [2], printed B-246, separately pairs 22216EAKD1 with AH316. The row has d1 = 75 mm and G = M90 × 2. Its applied-nut column lists AN18; footnote 5 states that this column concerns nuts used at disassembly. That entry must not be silently re-labelled as the complete operating retention arrangement.
The same row records B4 = 52 mm, with footnote 2 defining it as a reference dimension before the withdrawal sleeve is attached. This is not a confirmed final installed projection, tool-clearance requirement or extraction travel. The drawing, symbol and footnote belong together.
These numbers and accessory identities belong to NTN’s stated pairing. AH316, AN18, 75 mm, M90 × 2 and B4 = 52 mm have not been approved for Luan 22216K. They do not confirm the unit or taper geometry of Luan’s publication. Their value to this enquiry is the distinction between assembly stages and accessory roles.
Resolve the service arrangement while the housing and adjacent parts can still be designed.
If the responsible designer proposes a withdrawal sleeve for the Luan bearing, ask for a controlled section showing the approved bearing/sleeve assembly, its installed position and operational retention. Request a separate description of the removal method and the components it needs. A list naming a sleeve and a nut cannot resolve both roles without that drawing and procedure.
Service question
Required information from the actual assembly
Which nut or tool is used to remove the sleeve?
Identify its full designation, thread/interface and supply scope. State whether it is delivered with the bearing assembly or supplied as service equipment.
Can it reach the sleeve after installation?
Show the actual thread exposure, tool approach and adjacent housing/shaft parts. Use approved installed dimensions rather than a pre-attachment catalogue reference.
What must be removed or released first?
Obtain the maker’s procedure and the machine designer’s access sequence, including how the assembly is supported. Do not invent a removal sequence from a schematic.
What dimensional state is each drawing value describing?
Label pre-attachment reference, final position and required service space separately. Resolve any ambiguous symbol before ordering or machining.
Keep the approved service drawing and accessory list with the machine documentation, and review changes to adjacent parts against that access requirement. This page supplies no extraction force, loosening torque, tool size or clearance distance. Those belong to the actual approved construction and procedure.
The Luan archive’s exact row/header and NTN’s full table, drawing and footnotes were read and visually checked. Fresh Luan access on 2026-10-09 failed with a certificate-name error. No delivered Luan sleeve, installed access or disassembly operation has been verified.
A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.
Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.
Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers
168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08
Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.
Ask the manufacturer for these when you enquire.
Request a quote for 22216K.
Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.
Original saved row/header read and actually viewed; dimension unit, sleeve pairing and removal procedure absent. Fresh certificate-name failure on 2026-10-09; archive recheck only.
PDF page 222, printed B-246/B-247, read, rendered and actually viewed. Exact 22216EAKD1/AH316/AN18 row; applied nut is for disassembly, B4 is before sleeve attachment. NTN-specific example, no Luan sleeve approval or removal setting transferred.
Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.
We use cookies and analytics to operate this website and measure visits. Form contents and private workspace pages are excluded from analytics. Privacy & cookies