The source does not state dimension units. Obtain the offered drawing before using these historical values.
Spherical roller
22216W33
22216W33 is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 80 × 140 × 33 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.
If 22216W33 is proposed for a continuous caster, preserve the complete application specification.
Luan’s published row does not document a continuous-caster design or field validation. A dedicated SKF catalogue identifies more than W33 in its complete caster bearing codes. Use the actual machine requirement and incumbent specification to assess a proposed replacement; the shared numerical stem is not approval.
Do not shorten an application-specific order to 22216 and W33.
The exact retained Luan 22216W33 row [1] records 80/140/33 with no dimension unit, 2200/3000 r/min grease/oil entries, 115/180 kN dynamic/static ratings and 2.2 kg reference mass. The row specifies no internal clearance, caster-specific construction or continuous-casting approval.
SKF’s dedicated continuous-caster publication [2], January 2023, lists 22216/C3W33VA9A1 and 22216/C4W33VA9A1. Its designation diagram separates radial clearance, W33 lubrication features and the caster-specific VA9A1 design. W33 alone does not preserve that full specification.
If the incumbent order names one of those SKF constructions, keep its full designation in the replacement enquiry. Ask the proposer to map each required property to the offered Luan construction and identify deviations. Do not accept a shortened quotation that silently drops clearance or application-specific requirements. Neither SKF’s suffix meaning nor its design properties are Luan properties.
The task is to establish the actual machine’s requirement, not automatically to demand another maker’s proprietary suffix. A different design can only be assessed against that requirement with appropriate evidence. The examined Luan publication leaves that assessment unresolved.
A catalogue speed entry and a field result each have a limited scope.
The SKF publication recommends below 50 rpm for continuous-caster operation in its stated context. This is not a Luan maximum speed. Luan’s 2200/3000 r/min entries do not document that caster duty or its suitability.
SKF’s illustrated field cases concern 23220 VA9B1 and 24030 VA9B1, not 22216W33. Their results cannot establish performance of this Luan offer or every part named in the brochure.
Claim in a proposed replacement offer
Evidence needed before a decision
“It has the same 22216 stem and W33 feature.”
Identify the actual complete construction, controlled units and drawings, and how it meets the incumbent’s functional requirements. A partial designation omits key order details.
“Its catalogue speed is higher than our caster speed.”
Assess the real load cycle, temperature, lubrication and contamination conditions for this caster position. The published speed pair does not answer all of those requirements.
“This bearing family has successful caster trials.”
Identify the tested maker, full parts, machine positions, conditions and result limits. Explain the relevance to the actual offered part rather than copying a family-level success claim.
“It is a direct replacement.”
Document interface and functional assessment, deviations, responsible approval and any agreed validation. Keep a quotation separate from an approved replacement decision.
For a real caster proposal, request one comparison tied to the actual position and complete incumbent part. Put unresolved requirements in that comparison rather than treating them as matches. If the requirement or offered construction cannot be identified, the available record is insufficient for a replacement decision.
Luan’s saved exact row/header was reviewed; fresh access on 2026-10-09 failed with a certificate-name error. SKF’s designation, exact rows, duty note and case identities were read and visually checked. No Luan caster test, direct replacement approval or field performance has been obtained.
A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.
Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.
Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers
168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08
Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.
Ask the manufacturer for these when you enquire.
Request a quote for 22216W33.
Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.
Original saved row/header read and actually viewed; dimension unit, clearance and caster-specific assessment absent. Fresh certificate-name failure on 2026-10-09; archive recheck only.
January 2023 publication, PDF/printed pages 3–4 read, rendered and actually viewed: complete 22216 caster codes, separate duty recommendation and different-model case identities. No Luan specification or application approval transferred.
Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.
We use cookies and analytics to operate this website and measure visits. Form contents and private workspace pages are excluded from analytics. Privacy & cookies