BearingIndex
THE BEARINGINDEX DIRECTORY

22217W33 — 85 × 150 × 36 (unit unconfirmed)

HISTORICAL DIMENSION INTERPRETATIONUNIT UNCONFIRMED

The source does not state dimension units. Obtain the offered drawing before using these historical values.

Spherical roller

22217W33

22217W33 is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 85 × 150 × 36 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.

Bore d
85 unit unconfirmed
Outside D
150 unit unconfirmed
Width B
36 unit unconfirmed

Compare the 1 publication

MODEL-SPECIFIC BUYER GUIDE · SOURCES CHECKED 2026-10-09

Before comparing 22217W33 speed figures, identify their definitions and oil arrangements.

Luan’s original table labels two entries Grease and Oil. It does not distinguish an oil-bath limit, thermal reference or mechanical limit with forced circulation. NSK’s separate 22217EAE4 publication makes those categories explicit. A number without its category cannot settle a sourcing decision.

The exact NSK example has four fields where Luan’s row has two.

The saved Luan 22217W33 row [1] records Grease 2000 and Oil 2800, under r/min. It also gives 85/150/36 with no dimension unit, 145/228 kN dynamic/static ratings and 2.7 kg reference mass. The oil column does not identify the lubrication arrangement or a thermal/mechanical definition.

The live NSK 22217EAE4 page [2] identifies the following separate fields for its complete part. They are shown to clarify categories, not to recommend an NSK substitute or assign its limits to Luan.

NSK 22217EAE4 fieldPublished valueCondition stated on that page
Thermal Speed Rating (Oil-bath)4000 min−1Oil-bath lubrication under conditions outlined in ISO 15312
Mechanical (forced-circulation oil)5600 min−1Properly designed and controlled forced-circulation oil lubrication
Grease3400 min−1Grease lubrication
Oil (Oil-bath)4300 min−1Oil-bath lubrication

NSK’s linked speed explanation [3] defines thermal rating through heat equilibrium under reference conditions. Its mechanical limit assumes appropriate lubrication, heat dissipation and temperature control. Thus, even two oil-related values on the same exact NSK page are not the same kind of statement.

NSK’s ISO reference does not certify Luan or supply Luan’s missing test conditions. No ISO 15312 test report for Luan has been obtained, and the standard’s full clauses were not reviewed here. No NSK speed or heat-equilibrium calculation is transferred to the offered Luan product.

Ask the seller to return a definition alongside every speed figure.

For the offered Luan 22217W33, ask what the published 2800 r/min oil entry represents: its defined speed category, assumed oil supply method and conditions, and the document/revision that establishes them. Do not silently label it oil-bath or forced-circulation because another catalogue uses those terms.

If two proposals are being compared, first retain each complete maker/part identity and original field label. Then identify which proposal’s lubrication arrangement and speed category correspond to the actual machine. A higher forced-circulation number does not demonstrate that an oil-bath installation can run at that speed; a thermal reference value is not an unconditional operating permission.

Give the responsible maker the required speed cycle, actual lubricant/supply arrangement, load and thermal case. Request its application assessment and any conditions that the machine must meet. W33 by itself does not specify a pump, circulation control or heat-removal system. No flow rate, oil viscosity, maximum machine speed or changeover benefit is invented on this page.

Luan’s original saved exact row/header was visually checked; fresh access on 2026-10-09 failed with a certificate-name error. NSK’s current exact speed fields and linked definition table were read and visually checked. No Luan speed-category clarification or operating test has been obtained.

What each manufacturer published.

ManufacturerDynamic load rating (kN)Static load rating (kN)Limiting speed — grease (rpm)Limiting speed — oil (rpm)Reference mass (kg)Source recorded
Luan Rolling Bearing
22217W33
145228200028002.72026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

The works that publish 22217W33.

Luan Rolling Bearing

Luan, Anhui, China

Spherical and cylindrical roller bearings

Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.

Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers

168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Luan Rolling Bearing about 22217W33

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.

Ask the manufacturer for these when you enquire.

Request a quote for 22217W33.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Luan Rolling Bearing · 22217W33 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

Sources used for the individual buyer guide

  1. Luan Rolling Bearing · retained exact 22217W33 row ↗

    Original exact row/header read and actually viewed; Grease/Oil r/min pair retained without assigning a missing oil method. Dimension unit unstated. Fresh certificate-name failure on 2026-10-09; archive recheck only.

  2. NSK · live exact 22217EAE4 speed fields ↗

    Current complete-part page read and four speed fields/conditions actually viewed on 2026-10-09. Separate NSK example; no speed, dimension or application approval transferred to Luan.

  3. NSK · Speeds, Table 5.1 definitions ↗

    Linked official page read; original Table 5.1 image opened in browser and actually viewed, including definition and applicability notes. NSK definitions do not establish Luan’s unknown speed basis or an ISO test result.

Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.