BearingIndex
THE BEARINGINDEX DIRECTORY

22218W33 — 90 × 160 × 40 (unit unconfirmed)

HISTORICAL DIMENSION INTERPRETATIONUNIT UNCONFIRMED

The source does not state dimension units. Obtain the offered drawing before using these historical values.

Spherical roller

22218W33

22218W33 is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 90 × 160 × 40 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.

Bore d
90 unit unconfirmed
Outside D
160 unit unconfirmed
Width B
40 unit unconfirmed

Compare the 1 publication

MODEL-SPECIFIC BUYER GUIDE · SOURCES CHECKED 2026-10-09

Do not turn a W33 catalogue field into a housing machining dimension.

Luan’s 22218W33 row omits relubrication geometry. Even two current official NTN pages for 22218EAW33 display different groove-width values. The useful next step is a controlled drawing and a resolved interface, rather than selecting whichever online number looks most precise.

Retain the field label, value and original diagram together.

The retained exact Luan 22218W33 row [1] gives 90/160/40 without a dimension unit, 1900/2600 r/min grease/oil entries, 168/272 kN dynamic/static ratings and 3.28 kg reference mass. It does not publish groove width, lubrication-hole diameter, count or tolerances.

For a separate NTN part, the two official pages below both identify 22218EAW33. Their displayed fields differ. NTN Americas’ original diagram shows W0 across the outer-ring groove and d0 at the lubrication hole; the Europe page explicitly names groove width and hole diameter.

Official NTN publicationWidth field as publishedHole field as published
NTN Americas Bearing Finder [2]W0: 10.000 mmd0: 4.500 mm
NTN Europe E-Shop [3]b — Groove width: 10.2 mmk — Hole diameter: 4.5 mm; 3 lubrication holes

Both pages were read live on 2026-10-09. This is a publication difference, not a confirmed manufacturing change or a proven error in either page. The checked fields do not provide a tolerance or revision explanation that resolves the width difference. Decimal formatting alone does not make one value authoritative for machining.

None of these NTN dimensions or hole counts is assigned to Luan 22218W33. The common designation number, W33 letters and similar envelope cannot supply Luan’s missing interface drawing.

Resolve the supplied part and the housing interface with a controlled drawing.

If the purchase is for NTN 22218EAW33, send the two original page references and their exact field labels to the responsible NTN technical channel. Ask which controlled drawing applies to the supplied product, how W0 and b are defined, and what nominal value and tolerance govern the interface. Do not average 10.0 and 10.2, or silently choose a regional page, to create an acceptance limit.

If the purchase is for Luan 22218W33, the unresolved question is different: obtain Luan’s own complete drawing. Ask it to identify the outer-ring groove, lubrication-hole geometry and relevant tolerances for the actual offered construction. Keep the full designation, maker identity and drawing revision on the same request. A photograph may help identify features but cannot replace dimensional approval.

Show the housing’s intended lubricant supply path and the dimension that needs approval. Have the responsible designer review how that path meets the bearing feature in the assembled arrangement. The bearing groove width is not automatically the required width of a housing groove, and the hole diameter does not establish pump flow or delivery pressure.

Close the review with the maker’s resolved drawing and the accepted machine-interface revision. If the discrepancy or offered-part geometry is still unresolved, retain that status before releasing a machining drawing. This page specifies no housing groove width, drilling operation, lubrication flow or tolerance for Luan.

The Luan archived row/header, both official NTN pages and the Americas original labelled diagram were read and visually checked. Fresh Luan access on 2026-10-09 failed with a certificate-name error. No supplied bearing measurement, maker reconciliation or actual housing-path test has been obtained.

What each manufacturer published.

ManufacturerDynamic load rating (kN)Static load rating (kN)Limiting speed — grease (rpm)Limiting speed — oil (rpm)Reference mass (kg)Source recorded
Luan Rolling Bearing
22218W33
168272190026003.282026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

The works that publish 22218W33.

Luan Rolling Bearing

Luan, Anhui, China

Spherical and cylindrical roller bearings

Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.

Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers

168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Luan Rolling Bearing about 22218W33

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.

Ask the manufacturer for these when you enquire.

Request a quote for 22218W33.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Luan Rolling Bearing · 22218W33 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

Sources used for the individual buyer guide

  1. Luan Rolling Bearing · retained exact 22218W33 row ↗

    Exact archived row/header read and actually viewed; dimension unit and relubrication geometry absent. Fresh certificate-name failure on 2026-10-09; archive recheck only.

  2. NTN Americas · live exact 22218EAW33 fields and drawing ↗

    Current exact item read; W0/d0 values actually viewed and original linked diagram opened and viewed on 2026-10-09. Separate NTN publication, with no Luan dimension transfer.

  3. NTN Europe · live exact 22218EAW33-NTN ↗

    Exact NTN-branded page read; groove-width b, hole-diameter k and count actually viewed on 2026-10-09. Width difference retained as unresolved; no tolerance or manufacturing-change explanation inferred.

Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.