BearingIndex
THE BEARINGINDEX DIRECTORY

22220 — 100 × 180 × 46 (unit unconfirmed)

HISTORICAL DIMENSION INTERPRETATIONUNIT UNCONFIRMED

The source does not state dimension units. Obtain the offered drawing before using these historical values.

Spherical roller

22220

22220 is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 100 × 180 × 46 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.

Bore d
100 unit unconfirmed
Outside D
180 unit unconfirmed
Width B
46 unit unconfirmed

Compare the 1 publication

MODEL-SPECIFIC BUYER GUIDE · SOURCES CHECKED 2026-10-09

A temperature claim for 22220 needs the complete bearing and lubricant conditions.

Luan publishes no operating-temperature range in this row. A separate NTN part has a temperature field, while SKF explains distinct ring, seal and lubricant constraints. These statements cannot be combined into a temperature approval for the offered Luan bearing.

A published range belongs to the identified product.

The exact saved Luan 22220 row [1] gives 100/180/46 without a dimension unit, 1700/2000 r/min grease/oil entries, 222/358 kN dynamic/static ratings and 5 kg reference mass. It gives no temperature range, ring-stabilization class or identified lubricant.

NTN’s current complete 22220EAW33 page [2] separately lists “Operating Temperature Range” as −40 to 200 °C. That field belongs to the NTN part. It is not Luan’s missing range, and it does not identify the grease selected for the actual machine.

Keep a seller’s temperature statement with its complete part, source revision and defined conditions. A catalogue temperature endpoint and a speed endpoint should not be combined into a new simultaneous operating claim unless the responsible maker assesses that case. No high-temperature performance test or low-temperature startup approval for Luan 22220 has been obtained here.

Ring stabilization and grease performance describe different limitations.

SKF’s spherical-roller guidance [3], printed 785, names dimensional stability of the rings, seals and lubricant as possible temperature constraints. Its heat-stabilization statement concerns SKF bearings, and does not establish the heat treatment or permissible duty of Luan 22220.

The same catalogue’s grease explanation, printed 117, distinguishes performance limits from high and low temperature limits. Its high temperature limit is associated with the dropping point, where grease loses consistency; the diagram places predictable grease-life performance inside a narrower region. Thus, a dropping-point value is not, by itself, an approved continuous operating temperature.

For the actual proposal, identify the exact lubricant and obtain its relevant performance limits and life/maintenance basis under the intended conditions. If seals are present in the machine, identify their actual material and conditions separately. Do not copy a sealed-bearing grease chart onto an unidentified open-bearing installation, or infer that a steel cage establishes the ring or lubricant temperature limit.

Send a thermal case that can be assessed and checked.

  1. Define the temperature location. Distinguish ambient, lubricant supply, housing surface and any ring-temperature estimate. State whether each value is measured or calculated and retain the basis; a housing reading is not automatically an inner-ring temperature.
  2. Separate the operating states. Give cold-start, continuous operation and temporary peaks with their durations, speed and load. Do not describe a short peak as the continuous duty or use a steady-state reading to approve cold starting.
  3. Identify the complete arrangement. Include the offered bearing construction, actual lubricant, delivery/maintenance arrangement and any seals. Request the responsible maker’s assessment of those combined conditions.
  4. Agree how approval will be checked. Retain the maker’s limits and conditions with the relevant measurement locations, commissioning review and required operating validation. If the temperature basis or material/lubricant data is absent, keep that part of the assessment unresolved.

No working-temperature ceiling, grease grade, replenishment interval or alarm setting is prescribed for Luan on this page. Those decisions require the supplied construction and actual operating case; the unrelated NTN range and SKF guidance cannot fill the missing evidence.

The Luan original archived row/header, NTN’s live exact temperature field and SKF’s temperature/grease-limit pages were read and visually checked. Fresh Luan access on 2026-10-09 failed with a certificate-name error. No actual machine temperatures, lubricant test or Luan thermal approval has been verified.

What each manufacturer published.

ManufacturerDynamic load rating (kN)Static load rating (kN)Limiting speed — grease (rpm)Limiting speed — oil (rpm)Reference mass (kg)Source recorded
Luan Rolling Bearing
22220
2223581700200052026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

The works that publish 22220.

Luan Rolling Bearing

Luan, Anhui, China

Spherical and cylindrical roller bearings

Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.

Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers

168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Luan Rolling Bearing about 22220

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.

Ask the manufacturer for these when you enquire.

Request a quote for 22220.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Luan Rolling Bearing · 22220 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

Sources used for the individual buyer guide

  1. Luan Rolling Bearing · retained exact 22220 row ↗

    Exact archived row/header read and actually viewed; dimension unit, temperature range, ring stabilization and lubricant identity absent. Fresh certificate-name failure on 2026-10-09; archive recheck only.

  2. NTN Americas · live complete 22220EAW33 temperature field ↗

    Exact complete-part page read and Operating Temperature Range field actually viewed on 2026-10-09. Separate NTN statement; no temperature or lubricant approval transferred to Luan.

  3. SKF · Rolling bearings, temperature constraints and grease performance limits ↗

    PDF pages 787 and 119, printed 785 and 117, read, rendered and actually viewed. Ring/seal/lubricant constraints and Diagram 4 performance/limit distinctions retained; no SKF stabilization or grease limit assigned to Luan.

Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.