BearingIndex
THE BEARINGINDEX DIRECTORY

22220W33 — 100 × 180 × 46 (unit unconfirmed)

HISTORICAL DIMENSION INTERPRETATIONUNIT UNCONFIRMED

The source does not state dimension units. Obtain the offered drawing before using these historical values.

Spherical roller

22220W33

22220W33 is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 100 × 180 × 46 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.

Bore d
100 unit unconfirmed
Outside D
180 unit unconfirmed
Width B
46 unit unconfirmed

Compare the 1 publication

MODEL-SPECIFIC BUYER GUIDE · SOURCES CHECKED 2026-10-09

An offer for 22220W33 needs an accuracy requirement as well as a clearance requirement.

“Normal” can describe different bearing properties. Before accepting that word on a quotation, ask which property and standard it refers to. The recorded Luan row supplies neither an accuracy class nor a radial-clearance class; a separate NTN example explicitly lists both.

CN and JIS-0 RBEC-1 answer different questions.

The retained Luan 22220W33 row [1] records 100/180/46 without a stated dimension unit, 1700/2000 r/min grease/oil entries, 222/358 kN dynamic/static ratings and 5.01 kg reference mass. Its headers and row give no precision class or radial internal clearance.

The separate, complete NTN 22220EAW33 publication [2] lists “CN” under Radial Internal Clearance and “JIS-0 RBEC-1” under Tolerance. Ring Modification is another field, listed as Relube. Those are three separate statements on one identified NTN product, not three ways of specifying the same property. None establishes the corresponding property of the Luan offer.

If a quotation merely says “normal bearing,” return it for clarification: normal in which field? A relubrication feature does not supply the missing accuracy requirement. Equally, accepting a clearance class does not close an accuracy review. Put the two requirements on separate lines of the order and ask the supplier to confirm each for the offered construction.

Identify the characteristic before asking for a tolerance report.

NTN’s engineering catalogue [3], printed A-54–A-55, distinguishes dimensional accuracy from running accuracy. Its examples include bore and outside diameters, width and dimensional variation in the first group, and ring runout and squareness characteristics in the second. A nominal dimension alone is not a measured accuracy result.

The catalogue’s comparison table also distinguishes ABEC terminology for ball bearings from RBEC terminology for roller bearings. Its note says JIS and ABMA tolerances and allowances differ slightly. Treat the NTN page’s combined class label as its published specification, not permission to substitute every numerical limit or test method between standards.

For the actual Luan order, identify the applicable standard and revision, required class, and the particular characteristic that matters to the machine. If a special requirement lies outside the standard class, write that requirement explicitly and obtain a maker-approved inspection basis. Do not invent a higher-precision suffix or assume that an NTN class is available from Luan.

A report must show what was measured, not just say “passed.”

The same NTN catalogue, printed A-72–A-73, describes rotation-tolerance measurement methods and illustrates a bore-tolerance notation problem: the mean diameter within a plane is a defined characteristic. Omitting that definition can change how a drawing is interpreted. Its illustrated 60 mm bore is a notation example, not a tolerance for 22220W33.

In the requested inspection recordWhy the buyer needs it
Part and lot identityConnect the report to the complete offered construction and delivered batch, with the drawing revision.
Defined characteristicName the dimensional or running-accuracy characteristic; keep a radial-clearance result in its own field.
Method and conditionsIdentify the agreed measurement procedure and conditions so a result can be compared with the applicable criterion.
Criterion and resultShow the authorized limit with its unit, the actual result and the lot acceptance or sampling basis agreed with the supplier.

If the supplier sends only a single measured bore value, ask which defined characteristic it represents and what requirement it proves. If the report contains only “CN passed,” it has not supplied evidence for a separately required dimensional or running-accuracy characteristic. Resolve the gap before treating the report as order acceptance.

No numerical tolerance, clearance interval, inspection result or certification is assigned to Luan here. The exact saved Luan row/header, current NTN product fields and the cited catalogue explanations were read and visually checked. Fresh Luan access on 2026-10-09 failed with a certificate-name error; the Luan review uses the retained publication. No supplier inspection report has been obtained.

What each manufacturer published.

ManufacturerDynamic load rating (kN)Static load rating (kN)Limiting speed — grease (rpm)Limiting speed — oil (rpm)Reference mass (kg)Source recorded
Luan Rolling Bearing
22220W33
222358170020005.012026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

The works that publish 22220W33.

Luan Rolling Bearing

Luan, Anhui, China

Spherical and cylindrical roller bearings

Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.

Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers

168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Luan Rolling Bearing about 22220W33

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.

Ask the manufacturer for these when you enquire.

Request a quote for 22220W33.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Luan Rolling Bearing · 22220W33 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

Sources used for the individual buyer guide

  1. Luan Rolling Bearing · retained exact 22220W33 row ↗

    Exact archived row and headers actually viewed. Dimension unit, accuracy class and clearance class absent. Fresh certificate-name failure on 2026-10-09; archive recheck only.

  2. NTN Americas · complete 22220EAW33 product specification ↗

    Current exact product page read; CN clearance, JIS-0 RBEC-1 tolerance and Relube fields actually viewed together. These statements belong to NTN’s complete part, not Luan.

  3. NTN · Ball and Roller Bearings 2203E, accuracy and measurement definitions ↗

    PDF pages 31 and 40, printed A-54–A-55 and A-72–A-73, read, rendered and actually viewed. Dimensional/running accuracy, class-comparison qualifications and measurement/notation distinctions; no numerical tolerance transferred.

Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.