The source does not state dimension units. Obtain the offered drawing before using these historical values.
Spherical roller
22222
22222 is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 110 × 200 × 53 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.
Buying a spare 22222 and preserving an installed 22222 are two different jobs.
Start with where the bearing will spend its waiting time: inside its delivery package, on a warehouse shelf, or already installed in a machine. The recorded Luan catalogue does not provide preservation instructions. Do not use a machine-standby recommendation as an instruction to open and rotate a packaged spare.
Include the package and storage conditions in the spare-parts order.
The retained exact Luan 22222 row [1] gives 110/200/53 without dimension units, 1500/1900 r/min grease/oil entries, 288/465 kN dynamic/static ratings and 7.4 kg reference mass. It gives no packaging construction, preservation period, humidity limit or shipping gross weight. Use the stated mass as a catalogue reference; ask the supplier for actual packed weight and package dimensions when arranging freight.
NTN’s general handling guidance [2], printed A-150–A-151, identifies cleanliness, impact avoidance and rust prevention as handling concerns. Its storage discussion covers condensation from temperature/humidity changes. For transport it shows individual bearing boxes lying horizontally inside a shipping box with remaining space filled, while separately instructing users to follow any orientation marking on the shipping box.
Those illustrations refer to different levels of packaging. A direction for the inner bearing box does not override an arrow on the outer shipping carton. Obtain Luan’s actual packing instruction and preserve its orientation markings; do not claim that the NTN picture depicts the supplied Luan package.
Before dispatch: request package identification, orientation instructions, corrosion-protection/storage conditions and any preservation expiry or reinspection rule that applies to this supply.
At receipt: record the delivered package and lot identity, visible damage or moisture, and any deviation from the agreed packing condition. Keep that evidence for the supplier rather than interpreting a damaged carton as proof of bearing damage.
In the store: keep the maker’s storage instructions with the spare and record conditions or incidents that may require its review before installation.
The archived row does not establish that Luan uses NTN’s rust-preventive coating or approves NTN’s numerical storage guidelines. Request instructions for the offered part and packaging instead of copying another maker’s humidity, stacking or storage-duration limit.
A bearing that is not running still needs a preservation decision.
SKF’s general machine-standby guidance [3], printed 207, discusses rotating or running standby machines to redistribute lubricant and change the rolling-element position relative to the raceways, reducing the risk of false brinelling and standstill corrosion. It supplies no interval for the actual machine or the offered Luan 22222.
For an installed bearing, ask the machine owner and bearing supplier to agree the standby procedure. The review should identify the lubricant state, surrounding vibration sources, waiting period, machine restrictions and the inspection or restart checks required. Any permitted rotation belongs to that approved machine procedure; this page does not instruct you to energize the machine, change its isolation state or turn it on a guessed schedule.
If purchasing the spare because a bearing became noisy after a long stop, include the timing of the symptoms, stop duration, vibration exposure and available inspection findings in the enquiry. A symptom appearing after standby does not prove false brinelling. Keep the observed facts separate from a proposed cause so the supplier can review the failure and replacement requirement.
The packaged-spare instructions and the installed-machine plan should therefore travel as separate documents. Neither the speed entries nor the static rating in Luan’s row establishes resistance to storage or standstill damage. No special coating, storage lifetime, diagnostic conclusion or preservation interval has been verified for this offer.
The exact archived Luan row/header and the cited NTN and SKF guidance were read and visually checked. Fresh Luan access on 2026-10-09 failed with a certificate-name error; its row was rechecked from the retained publication. No actual shipment, warehouse condition or installed machine has been inspected.
A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.
Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.
Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers
168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08
Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.
Ask the manufacturer for these when you enquire.
Request a quote for 22222.
Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.
Exact archived row/header read and actually viewed; dimension unit and preservation/packing conditions absent. 7.4 kg is reference mass, not verified shipping gross weight. Fresh access certificate-name failure on 2026-10-09.
PDF page 79, printed A-150–A-151, read, rendered and actually viewed. Individual bearing-box orientation, shipping-box markings, impact/contamination and condensation guidance distinguished; no NTN storage number or coating transferred to Luan.
PDF page 209, printed 207, read, rendered and actually viewed. General machine-standby preservation rationale; no Luan or machine-specific rotation interval, operation approval or diagnosis.
Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.
We use cookies and analytics to operate this website and measure visits. Form contents and private workspace pages are excluded from analytics. Privacy & cookies