BearingIndex
THE BEARINGINDEX DIRECTORY

22222W33 — 110 × 200 × 53 (unit unconfirmed)

HISTORICAL DIMENSION INTERPRETATIONUNIT UNCONFIRMED

The source does not state dimension units. Obtain the offered drawing before using these historical values.

Spherical roller

22222W33

22222W33 is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 110 × 200 × 53 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.

Bore d
110 unit unconfirmed
Outside D
200 unit unconfirmed
Width B
53 unit unconfirmed

Compare the 1 publication

MODEL-SPECIFIC BUYER GUIDE · SOURCES CHECKED 2026-10-09

A vibration complaint should reach the 22222W33 supplier with measurement conditions and observed evidence.

“The bearing vibrates” does not tell a supplier which replacement or corrective change is justified. Record what changed, how it was measured and the machine state. Then separate the purchase specification from the investigation of why the previous bearing became abnormal.

A new measurement location can change the number you are comparing.

The retained Luan 22222W33 row [1] records 110/200/53 without stated dimension units, 1500/1900 r/min grease/oil entries, 288/465 kN dynamic/static ratings and 7.2 kg reference mass. It contains no vibration test method, acceptance threshold, rolling-element count or fault-frequency data.

NTN’s general vibration guidance [2], printed A-166, explains that measured values differ with measurement position and bearing-use conditions. It recommends accumulating data and setting criteria for each machine. A value from a different housing point or operating state is therefore not automatically a comparable trend point for the existing assembly.

Keep with each readingHow it helps the review
Point and directionIdentify the bearing position and sensor location/direction so a changed measurement setup is visible.
Measurement identityRetain instrument/settings, reported quantity and unit, and the available original result rather than only a cropped headline number.
Operating stateRecord speed, load/process state and whether the machine was starting, steady or changing condition.
Reference and criterionAttach comparable earlier data and the applicable machine criterion, including its source. A missing baseline remains missing.

NTN also states that characteristic bearing vibration frequencies depend on internal specifications and rotational speed. Do not create Luan fault frequencies from the three outer dimensions, or take another maker’s internal geometry as the geometry of this offer. Obtain the necessary exact construction information and a qualified analysis basis.

A symptom, a damage observation and a cause are different pieces of evidence.

NTN’s damage discussion, printed A-170–A-171, recommends recording the application, operating conditions and environment when premature damage occurs, then investigating possible causes against the observed damage and the conditions at the time. Its flaking table lists several possible factors, including load, installation, clearance, contamination and lubrication.

The catalogue includes a particular spherical-roller inner-ring photograph associated with axial load. That documented example is not a diagnosis of a Luan 22222W33, nor proof that every similar-looking mark has the same cause. Send the actual observation and context for review instead of borrowing the photograph’s conclusion.

Distinguish three statements in the enquiry: what the operator noticed; what measurement or inspection found; and what cause is still being considered. For example, a rise recorded after a lubrication change is a timeline fact, not proof that the change caused the rise. Keep the exact lubricant and maintenance record available for the investigation.

Ask for the replacement specification and the recurrence review separately.

  1. Identify the part: provide the complete installed designation, proposed replacement construction and drawing requirements. Luan’s archived dimensions still need confirmed units.
  2. Describe the event: state when the abnormality appeared, the machine state and relevant changes, without converting a suspected cause into a fact.
  3. Attach the evidence: supply comparable readings and the available inspection observations, with their measurement or inspection context.
  4. Request two answers: confirmation of the offered replacement against the order requirements, and a separate assessment of whether an application or maintenance issue needs correction.

A supplier can quote a bearing without having resolved the failure investigation. Do not treat that quotation, W33 designation or catalogue load rating as proof that replacement alone will remove the vibration. No machine-specific alarm, calculated fault frequency, failure diagnosis, test result or successful corrective action is established on this page.

The exact Luan archived row/header and the cited NTN vibration and damage sections were read and visually checked. Fresh Luan access on 2026-10-09 failed with a certificate-name error. No installed machine measurement, removed bearing or supplier failure report has been inspected here.

What each manufacturer published.

ManufacturerDynamic load rating (kN)Static load rating (kN)Limiting speed — grease (rpm)Limiting speed — oil (rpm)Reference mass (kg)Source recorded
Luan Rolling Bearing
22222W33
288465150019007.22026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

The works that publish 22222W33.

Luan Rolling Bearing

Luan, Anhui, China

Spherical and cylindrical roller bearings

Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.

Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers

168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Luan Rolling Bearing about 22222W33

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.

Ask the manufacturer for these when you enquire.

Request a quote for 22222W33.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Luan Rolling Bearing · 22222W33 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

Sources used for the individual buyer guide

  1. Luan Rolling Bearing · retained exact 22222W33 row ↗

    Exact archived row/header read and actually viewed. Dimension units, vibration method/threshold and internal fault-frequency data absent. Fresh access certificate-name failure on 2026-10-09.

  2. NTN · Ball and Roller Bearings 2203E, vibration and damage review ↗

    PDF pages 87 and 89, printed A-166–A-167 and A-170–A-171, read, rendered and actually viewed. Measurement-position/use-condition differences, construction/speed-dependent frequencies and multi-cause damage assessment. The illustrated damage case is not a Luan diagnosis.

Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.