The source does not state dimension units. Obtain the offered drawing before using these historical values.
Spherical roller
22224
22224 is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 120 × 215 × 58 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.
A sealed replacement for 22224 must fit the axial arrangement as well as the bore and housing.
A contamination concern can prompt a buyer to ask for a sealed version. Before accepting “same size,” compare the complete offered construction and the surrounding assembly. A separate SKF example shows why matching bore and outside diameter leaves an important width difference unresolved.
The two SKF examples share bore and outside diameter, but their widths differ.
The retained exact Luan 22224 row [1] gives 120/215/58 without a stated dimension unit, 1300/1700 r/min grease/oil entries, 342/565 kN dynamic/static ratings and 9.2 kg reference mass. It identifies no seal construction and provides no sealed alternative.
On the separate SKF product-table page [2], printed 798, complete 22224E appears under the cylindrical-bore column, while BS2-2224-2RS5/VT143 is a separate sealed construction. Read the complete designation and width, not just the first two dimensions:
Published part
Dimension statement in that source
What the comparison establishes
Luan 22224
120/215/58; dimension unit unstated.
Retained row only; sealing status and any alternative require confirmation.
SKF 22224E
d=120 mm, D=215 mm, B=58 mm.
Identified SKF cylindrical-bore example, not an approved Luan substitute.
SKF BS2-2224-2RS5/VT143
d=120 mm, D=215 mm, B=69 mm.
Separate sealed SKF construction; its width is 11 mm greater than the SKF 22224E example.
The 11 mm difference belongs to this SKF comparison. It is not a machining allowance, an instruction to change a spacer, or proof that a sealed Luan bearing has either width. Obtain Luan’s confirmed drawing units first and the proposed sealed part’s controlled drawing if a supplier offers one.
Width is one check; seal interference and the working space remain separate.
The same SKF catalogue, printed 786, discusses free space beside the bearing so rotating parts do not interfere with stationary machine parts, with misalignment and lubricant-space needs affecting the requirement. Its sealed-bearing guidance separately addresses a shaft abutment that could interfere with the seal and shows locking/spacer arrangements intended to avoid that interference.
For the actual proposed replacement, ask the supplier and machine designer to review the complete assembly section. Mark the bearing’s axial location, covers and shoulders, available working space, seal-adjacent geometry and locking parts. A width that fits between covers does not establish that an existing shoulder or lock washer clears the new seal.
Request the applicable abutment limits and surrounding-space requirements from the maker of the exact proposed part. Do not substitute SKF’s general illustration or its numerical clearance rule for an unknown Luan construction. Any spacer, locking-part or cover change also needs review of the resulting axial arrangement rather than approval by width alone.
Finish the proposal with the operating and maintenance requirements: confirmed sealing construction, speed/temperature suitability, lubrication plan and what changes from the existing assembly. A mechanical fit does not establish suitability for the original contamination problem or eliminate maintenance. This page prescribes no sealed replacement, seal material, grease interval or modified machining dimension.
The exact Luan archived row/header and SKF’s identified 22224E/sealed comparison rows and surrounding-space explanation were read and visually checked. Fresh Luan access on 2026-10-09 failed with a certificate-name error. No sealed Luan offer, actual machine drawing or successful retrofit has been verified.
A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.
Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.
Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers
168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08
Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.
Ask the manufacturer for these when you enquire.
Request a quote for 22224.
Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.
Exact archived row/header read and actually viewed; dimension unit and sealing status absent. No sealed Luan alternative established. Fresh certificate-name failure on 2026-10-09.
PDF pages 800 and 788, printed 798 and 786, read, rendered and actually viewed. Exact SKF widths 58/69 mm with 120/215 mm bore/outside diameter, and separate free-space/seal-abutment checks. No SKF substitute or numerical assembly criterion approved for Luan.
Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.
We use cookies and analytics to operate this website and measure visits. Form contents and private workspace pages are excluded from analytics. Privacy & cookies