The source does not state dimension units. Obtain the offered drawing before using these historical values.
Spherical roller
22224W33
22224W33 is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 120 × 215 × 58 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.
Compare the documented lubrication features, not whether two brand codes both contain W33.
A sourcing list can contain different complete codes for bearings with a documented outer-ring feed feature. Read the manufacturer’s design definition together with its exact product row. Then request the actual offered drawing; matching one feature does not establish a replacement.
SKF 22224E does not need a W33 suffix to document its standard feed feature.
The retained exact Luan 22224W33 row [1] gives 120/215/58 without a stated dimension unit, 1300/1700 r/min grease/oil entries, 342/565 kN dynamic/static ratings and 8.9 kg reference mass. It provides the designation but no groove/hole dimensions, drawing or manufacturer suffix definition in the examined table.
In the separate SKF catalogue [2], printed 776, CC and CA designs may use W33 for an annular groove with three lubrication holes, or W20 for three holes. The same paragraph says E designs have the annular groove and three holes as standard and do not identify that feature with a designation suffix.
Its exact product table, printed 798, lists the complete cylindrical-bore 22224E. Read that exact row with SKF’s E-design statement: the absence of W33 is not evidence that this SKF example lacks the standard groove and holes. It also is not permission to apply SKF’s naming rule to Luan’s plain 22224 or 22224W33.
For the Luan offer, request the maker’s explanation and the offered drawing. Until received, keep the table’s actual designation separate from an unverified description of its construction. A shared number sequence or familiar suffix cannot replace the missing manufacturer evidence.
A feed-feature match leaves the rest of replacement approval open.
Compare in the supplier response
Evidence to attach
Complete offered identity
Maker, full code, construction and controlled drawing revision; explain any departure from the requested designation.
Groove and holes
State groove presence, hole count and the actual dimensions/positions needed by the housing feed arrangement.
Remaining bearing requirements
Confirm bore construction, dimensions/units, clearance, cage/sealing and applicable ratings against the order; do not close these from a groove match.
Lubrication in the machine
Review the supply method, lubricant and operating conditions for the exact part and assembly, with any remaining requirements stated.
If a supplier proposes SKF 22224E instead of a requested W33-coded part, ask it to identify the documented feed features and every remaining requirement it has checked. Conversely, do not accept a W33-coded item solely because its letters match the purchase request. The response should resolve actual construction and housing-interface requirements, not merely rewrite the code.
This page gives no groove width, hole diameter or location for Luan and supplies no housing machining dimension. SKF’s standard feed feature is not a flow-rate specification, grease interval or evidence that the lubrication system is suitable for a particular duty. No cross-brand interchangeability, Luan suffix definition or offered stock is established here.
The exact Luan archived row/header and SKF’s E/CC/CA feature explanation and exact 22224E table row were read and visually checked. Fresh Luan access on 2026-10-09 failed with a certificate-name error. No current Luan drawing, housing-feed drawing or supplier alternative proposal has been obtained.
A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.
Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.
Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers
168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08
Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.
Ask the manufacturer for these when you enquire.
Request a quote for 22224W33.
Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.
Exact archived row/header read and actually viewed. Dimension unit, lubrication-feature geometry and suffix definition absent from the examined table. Fresh access certificate-name failure on 2026-10-09.
PDF pages 778 and 800, printed 776 and 798, read, rendered and actually viewed. SKF E designs have the annular groove/three holes without a feature suffix; CC/CA W33/W20 definitions are distinct. Exact SKF 22224E row identified; no rule or geometry transferred to Luan.
Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.
We use cookies and analytics to operate this website and measure visits. Form contents and private workspace pages are excluded from analytics. Privacy & cookies