BearingIndex
THE BEARINGINDEX DIRECTORY

22226 — 130 × 230 × 64 (unit unconfirmed)

HISTORICAL DIMENSION INTERPRETATIONUNIT UNCONFIRMED

The source does not state dimension units. Obtain the offered drawing before using these historical values.

Spherical roller

22226

22226 is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 130 × 230 × 64 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.

Bore d
130 unit unconfirmed
Outside D
230 unit unconfirmed
Width B
64 unit unconfirmed

Compare the 1 publication

MODEL-SPECIFIC BUYER GUIDE · SOURCES CHECKED 2026-10-09

A vibration-duty proposal for 22226 needs both an assembly fit and a construction-specific duty review.

A bearing with the requested bore can still have the wrong outside diameter or width. A bearing described for vibration can still need review against the actual acceleration mode and lubricant. Keep those two decisions visible when requesting a replacement.

Two SKF parts with a 130 mm bore occupy different assembly space.

The retained exact Luan 22226 row [1] gives 130/230/64 without dimension units, 1200/1600 r/min grease/oil entries, 408/708 kN dynamic/static ratings and 11.2 kg reference mass. It gives no vibration-duty construction or permissible acceleration.

The separate SKF catalogue [2], printed 800, lists complete 22226E and complete 22326CCJA/W33VA405. These are separate product identities, not interchangeable ways to write one bearing:

SKF exampleIts published dimensionsWhat remains to decide
22226Ed=130 mm; D=230 mm; B=64 mm.Identified SKF 222-series example; the row is not approval for Luan vibration duty.
22326CCJA/W33VA405d=130 mm; D=280 mm; B=93 mm.Separate SKF vibratory design example; matching the SKF bore leaves outside diameter and width different.

If an alternative proposal is based only on “130 bore,” request the full envelope and assembly review. The two SKF rows illustrate the gap; they do not confirm Luan’s unstated dimension unit or prove that either SKF item replaces the Luan offer. A different housing or axial arrangement cannot be approved from bore alone.

Speed is only one part of a vibratory application.

SKF’s vibratory-design discussion, printed 778–779, describes special designs in its 223 series. It explains that roller and cage accelerations impose additional design demands, and that permissible acceleration depends on the lubricant and acceleration mode.

Its Mode 1 examples include rotating acceleration fields or angular acceleration from rapid speed changes; its Mode 2 concerns impact producing linear acceleration in a constant radial direction. Some applications combine the modes. The catalogue also qualifies its tabulated permissible-acceleration values for oil-lubricated bearings. Do not reuse such a value as a grease-duty approval.

For a Luan 22226 proposal, supply the actual machine duty: which rings/load directions are involved, relevant speed changes or impacts, available acceleration information and its measurement/calculation basis, load, lubricant and temperature. Ask the maker to identify the exact construction it has assessed and the approved conditions, rather than returning a general “spherical roller bearings suit vibration” statement.

Luan’s published grease/oil speed entries and load ratings do not provide a permissible acceleration for this offer. SKF’s separate special-design cage, clearance or acceleration capability is not assigned to Luan, and no numerical acceleration is calculated here.

Keep the dimensional proposal and duty assessment as two deliverables.

Request an offered-part drawing and a replacement assembly assessment first. Request the construction-specific duty assessment alongside it, identifying the lubricant, acceleration case and any operating restrictions. Review any proposed change to clearance, cage or bore construction as a change to the complete part, not as a marketing label.

If the evidence does not resolve both decisions, leave the proposal open for review. Neither a catalogue row nor a quotation is proof of a successful installation or vibration test. This page establishes no Luan vibration variant, cross-brand interchangeability, acceleration rating or test result.

The exact archived Luan row/header and SKF’s identified 22226E/22326CCJA/W33VA405 rows and vibratory-design conditions were read and visually checked. Fresh Luan access on 2026-10-09 failed with a certificate-name error. No actual machine drawing, acceleration record or maker-approved Luan duty assessment has been obtained.

What each manufacturer published.

ManufacturerDynamic load rating (kN)Static load rating (kN)Limiting speed — grease (rpm)Limiting speed — oil (rpm)Reference mass (kg)Source recorded
Luan Rolling Bearing
22226
4087081200160011.22026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

The works that publish 22226.

Luan Rolling Bearing

Luan, Anhui, China

Spherical and cylindrical roller bearings

Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.

Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers

168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Luan Rolling Bearing about 22226

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.

Ask the manufacturer for these when you enquire.

Request a quote for 22226.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Luan Rolling Bearing · 22226 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

Sources used for the individual buyer guide

  1. Luan Rolling Bearing · retained exact 22226 row ↗

    Exact archived row/header read and actually viewed; dimension unit and vibration-duty/acceleration data absent. Fresh certificate-name failure on 2026-10-09.

  2. SKF · Rolling bearings, exact product examples and vibratory-design conditions ↗

    PDF pages 802 and 780–781, printed 800 and 778–779, read, rendered and actually viewed. Exact SKF envelope difference, separate 223-series vibratory designs, acceleration modes and oil-lubricated qualification. No SKF geometry, construction or duty capability approved for Luan.

Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.