BearingIndex
THE BEARINGINDEX DIRECTORY

22226K — 130 × 230 × 64 (unit unconfirmed)

HISTORICAL DIMENSION INTERPRETATIONUNIT UNCONFIRMED

The source does not state dimension units. Obtain the offered drawing before using these historical values.

Spherical roller

22226K

22226K is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 130 × 230 × 64 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.

Bore d
130 unit unconfirmed
Outside D
230 unit unconfirmed
Width B
64 unit unconfirmed

Compare the 1 publication

MODEL-SPECIFIC BUYER GUIDE · SOURCES CHECKED 2026-10-09

A quotation for 22226K needs an explicit parts list before a mass comparison means anything.

The bearing code, a sleeve combination and a packed shipment describe different supply scopes. Establish what is included in each proposal and which mass is being reported. A catalogue mass does not list the components of the actual order.

SKF publishes three different mass statements for its separate 22226EK examples.

The retained exact Luan 22226K row [1] gives 130/230/64 without dimension units, 1200/1600 r/min grease/oil entries, 408/708 kN dynamic/static ratings and 11.2 kg reference mass. The row identifies no supplied sleeve, included locking parts or packed gross weight. It does not document a kit contents list.

The separate SKF catalogue [2] identifies a bearing in its product table and complete bearing/sleeve combinations in different tables. Keep each mass column heading with the row:

Exact SKF entryMass stated in its tableScope of the statement
22226EK11 kgBearing product-table entry, printed 800.
22226EK + H312614 kgAdapter table’s “Bearing + sleeve” mass, printed 826.
22226EK + AHX312611.5 kgWithdrawal table’s “Bearing + sleeve” mass, printed 833.

These are identified SKF entries, not approved Luan combinations. The combined masses cannot be compared with Luan’s 11.2 kg entry as though all three statements cover the same supplied parts. They also do not establish shipping gross weight. Do not subtract rounded catalogue masses to specify the actual mass of an individual supplied sleeve.

Put included and separately supplied components on distinct order lines.

For the Luan offer, request a bill of supplied components: the complete bearing, the exact sleeve if the approved arrangement needs one, and the required locking/spacer parts. Have the supplier state which are included, which must be ordered separately, and which existing parts are proposed for reuse. A drawing or “bearing + sleeve” mass heading is not itself a packing list for your purchase.

Review the proposed sleeve and accessories against the actual assembly rather than selecting H3126 or AHX3126 because they appear in the SKF example. The tables describe separate mounting routes; their component identities, shaft requirements and surrounding geometry must remain with the route chosen for the actual offer. Luan’s K row does not provide that approval.

For freight, request the actual net mass of the supplied assembly and the packed gross mass and package dimensions. For receiving, use the agreed component list and part/lot identities to check the delivery. A shipment with the expected weight still needs its actual components and compatibility checked; a mass difference alone does not identify which item is missing.

Close the purchase with two records: the approved assembly requirements and the supplier’s explicit delivery scope. If the quote omits the hardware required by that arrangement, obtain the missing lines before treating it as a complete replacement package. No Luan sleeve pairing, included nut/washer, actual delivery contents, freight figure or successful assembly is verified here.

The exact archived Luan row/header and SKF’s exact 22226EK, H3126 and AHX3126 combination rows and mass headings were read and visually checked. Fresh Luan access on 2026-10-09 failed with a certificate-name error. No current Luan kit quotation, packing list or assembly drawing has been obtained.

What each manufacturer published.

ManufacturerDynamic load rating (kN)Static load rating (kN)Limiting speed — grease (rpm)Limiting speed — oil (rpm)Reference mass (kg)Source recorded
Luan Rolling Bearing
22226K
4087081200160011.22026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

The works that publish 22226K.

Luan Rolling Bearing

Luan, Anhui, China

Spherical and cylindrical roller bearings

Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.

Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers

168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Luan Rolling Bearing about 22226K

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.

Ask the manufacturer for these when you enquire.

Request a quote for 22226K.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Luan Rolling Bearing · 22226K source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

Sources used for the individual buyer guide

  1. Luan Rolling Bearing · retained exact 22226K row ↗

    Exact archived row/header read and actually viewed. 11.2 kg is the published reference mass; supplied kit contents and gross shipment weight are not stated. Dimension units unconfirmed; fresh certificate-name failure on 2026-10-09.

  2. SKF · Rolling bearings, exact bearing and sleeve-combination mass headings ↗

    PDF pages 802, 828 and 835, printed 800, 826 and 833, read, rendered and actually viewed. Exact 22226EK bearing and H3126/AHX3126 combinations, with bearing versus bearing-plus-sleeve mass scope retained. No SKF hardware pairing or kit contents approved for Luan.

Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.