The exact SKF open and sealed rows share dimensions, but their speed statements differ.
The retained exact Luan 22228 row [1] gives 140/250/68 with no dimension unit, 1000/1400 r/min grease/oil entries, 478/805 kN dynamic/static ratings and 14.5 kg reference mass. It does not specify whether the offered construction is sealed or identify an initial grease. Those fields remain questions for Luan.
The separate SKF exact product table [2], printed 800, provides this comparison. The speed headings are SKF’s reference and limiting speeds; they are not the grease/oil headings in Luan’s row.
| SKF product-table field | 22228 CC/W33 | 22228-2CS5/VT143 |
| Bore / outside diameter / width | 140 / 250 / 68 mm | 140 / 250 / 68 mm |
| Reference speed | 2400 r/min | Not stated in this table entry; a dash is not zero. |
| Limiting speed | 3200 r/min | 670 r/min |
The SKF rows illustrate why an envelope match alone does not preserve a speed statement. They do not confirm Luan’s dimension units, supply a sealed Luan variant or approve either SKF item as a Luan replacement. For a proposed sealed offer, obtain that maker’s complete designation, dimensioned drawing and applicable speed conditions before checking it against the actual machine.
“Sealed” does not remove the need to compare grease life with required service.
SKF’s sealed-bearing discussion [2], printed 776–777, states that its sealed spherical roller bearings are supplied grease lubricated and should not be washed. VT143 identifies SKF LGEP 2 in that discussion. These are instructions for the identified SKF construction; neither the lubricant nor its washing instruction describes an unverified Luan offer.
The catalogue presents sealed-bearing grease life on an L10 basis, with 90% still reliably lubricated at that time under the stated conditions. Its conditions include horizontal shaft, inner-ring rotation, the grease’s appropriate operating-temperature zone, a stationary machine with low vibration, the specified axial/radial load relationship, and speed restrictions. A label saying “lubricated for life” is not an unlimited service-hours guarantee.
SKF also states that relubrication may be required when the required service life exceeds grease life. Thus “sealed” and “never needs relubrication” are not interchangeable statements. An actual maintenance proposal must say whether the intended service period is supported without replenishment, whether approved replenishment is required, or whether planned replacement is the intended strategy.
For the proposed Luan assembly, ask for the initial grease identity, grease-life assessment and its operating assumptions, plus the supplier’s maintenance procedure. Review housing access and any approved grease route with that procedure. Do not wash out supplied grease, substitute a plant grease or adopt the SKF replenishment formula solely because the nominal model resembles this example; no such action is approved for the Luan offer here.
Before accepting a maintenance-saving claim, keep three items together: the exact supplied bearing and lubricant, the actual duty assumptions, and the agreed service/maintenance plan. If the supplier has only confirmed dimensions, the speed and maintenance decisions remain open.
The exact archived Luan row/header and the exact SKF open/sealed rows and grease-life discussion were read and visually checked. Fresh Luan access on 2026-10-09 failed with a certificate-name error. No sealed Luan 22228 quotation, lubricant fill, grease-life result, maintenance interval or successful replacement has been verified.
Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →