The source does not state dimension units. Obtain the offered drawing before using these historical values.
Spherical roller
22230
22230 is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 150 × 270 × 73 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.
The 22230 speed entries need their own evidence; nearby model numbers cannot validate them.
The retained Luan table does not follow a simple “larger means slower” progression here. Preserve the published values, identify their unresolved conditions and obtain the offered construction’s speed assessment before ordering for a speed-critical duty.
The retained table’s speed sequence increases across these three specific rows.
The retained exact Luan 22230 row [1] gives dimension entries of 150/270/73 without units, 1300/1600 r/min under grease/oil, 508/875 kN dynamic/static ratings and 18.57 kg reference mass. The source does not describe its speed-test conditions, cage, clearance, cooling basis or current offered construction.
The independently read neighbouring plain-designation rows in that same table show:
Exact Luan source row
Grease speed entry
Oil speed entry
22228
1000 r/min
1400 r/min
22230
1300 r/min
1600 r/min
22232
1400 r/min
1900 r/min
This is the published sequence, not an explanation of why the values increase. It does not prove a printing error, a special cage or a tested performance advantage. Do not smooth the values into a decreasing sequence or estimate the 22230 rating from another row. The neighbouring models are source-reading context, not replacement recommendations or geometry matches.
Ask Luan to confirm the exact current 22230 entry and explain the speed headings and their applicable construction, lubricant and operating conditions. If a new controlled document differs, retain its identity and revision with the quoted bearing rather than silently replacing the historical reference.
SKF’s exact 22230 speed pair answers a different catalogue question.
The separate SKF catalogue [2], printed 802, lists 22230 CC/W33 with reference speed 2200 r/min and limiting speed 3000 r/min. The headings are not grease and oil. Those values neither verify Luan’s 1300/1600 entries nor supply a substitute Luan operating limit.
SKF’s explanation, printed 135, relates reference speed to standardized thermal conditions and limiting speed to mechanical considerations. It recommends considering the actual load and lubricant viscosity when adjusting reference speed, and notes that this adjustment does not account for the installation’s actual heat dissipation. A detailed thermal assessment is needed to include that effect.
Consequently, a comparison made from only two numbers can miss what each number represents. For the actual 22230 proposal, request the maker’s thermal basis and mechanical restrictions together. Include the required speed cycle, actual bearing reactions, lubricant and viscosity, cage/seals, operating clearance, surrounding heat input and heat-removal conditions in that review. No adjusted speed, thermal limit, clearance or duty approval is calculated here.
Close the enquiry with an identified document and an application-specific answer.
A usable response should identify the exact supplied construction, the document defining its ratings, and the conditions supporting the requested operating speed. If the response confirms only that “22230 is listed,” the application question remains unanswered. If the proposed lubricant or cage changes, ask whether the earlier speed assessment still applies to that revised offer.
Keep the historical row, the current supplier confirmation and the actual-duty assessment as distinct records. Record any agreed operating restriction and verification requirement with the order. Do not treat an oil-labelled catalogue figure as permission to increase machine speed, change lubrication or omit a thermal review.
The exact archived Luan 22230 row/header and the three plain-model speed rows, plus SKF’s exact 22230 CC/W33 row and speed-definition page, were read and visually checked. Fresh Luan access on 2026-10-09 failed with a certificate-name error. No current Luan speed explanation, controlled offer, thermal calculation or successful operation has been verified.
A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.
Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.
Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers
168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08
Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.
Ask the manufacturer for these when you enquire.
Request a quote for 22230.
Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.
Exact 22228/22230/22232 rows and grease/oil headings independently read and actually viewed. Higher successive entries preserved without invented cause, correction or interpolation; 22230 dimension units unconfirmed. Fresh certificate-name failure on 2026-10-09.
PDF804 printed802 exact reference2200/limiting3000 r/min; PDF137 printed135 thermal/mechanical meanings and adjusted-reference heat-dissipation boundary. Read, rendered and actually viewed. No SKF values, ISO reference conditions or calculation assigned to Luan.
Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.
We use cookies and analytics to operate this website and measure visits. Form contents and private workspace pages are excluded from analytics. Privacy & cookies