The source does not state dimension units. Obtain the offered drawing before using these historical values.
Spherical roller
22230K
22230K is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 150 × 270 × 73 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.
A bore reading needs its reference plane and inspection characteristic before it can support acceptance.
For a proposed tapered-bore supply, an isolated diameter is not a complete inspection result. Agree the actual bore geometry and document basis first, then ask for the characteristics and measurements that establish conformity to that drawing.
A tapered-bore nominal size refers to a defined end, not an arbitrary depth.
The retained exact Luan 22230K row [1] lists 150/270/73 with no dimension units, 1300/1600 r/min grease/oil entries, 508/875 kN dynamic/static ratings and 18.57 kg reference mass. It does not define the offered bore’s taper, tolerance class, measurement plane or acceptance limits. Preserve K in the enquiry and request those facts on the actual drawing.
The separate SKF exact table [2], printed 802, identifies 22230 CCK/W33 in its tapered-bore column. SKF’s tolerance-symbol discussion, printed 49, distinguishes nominal bore size d at a tapered bore’s theoretical small end from d1 at its theoretical large end. Its d1 here is a bore-end size, not a universal shaft or inner-ring outside-diameter field.
A measurement taken at an unspecified depth in a tapered bore cannot simply be compared with the small-end nominal size. Ask the supplier’s inspection report to identify the characteristic and reference plane or the agreed method for determining that theoretical-end size. One unlocated “150” reading does not establish the complete geometry of an actual 22230K delivery.
Size, cross-section variation and taper slope are different acceptance questions.
SKF’s separate tapered-bore table and symbol definitions [2] distinguish these characteristics:
SKF inspection characteristic
Meaning in that source
Question for the actual supplier report
Δdmp
Deviation of the mid-range bore size at the theoretical small end.
Which agreed plane/method and nominal size establish the reported deviation?
Vdsp
Range of two-point bore sizes within a cross section.
What positions/sections and readings support the reported variation?
ΔSL
Deviation of taper slope from its nominal value, derived from the defined end-size deviations.
What agreed end references and measurements support the taper result?
The characteristics do not replace one another. A reported small-end size alone does not establish cross-section variation or taper slope. Have the supplier state the applicable characteristics and limits for the actual offered bore, along with the method, equipment/reference basis and product or lot identity of the results.
SKF’s general radial-bearing table, printed 38, expressly refers its tapered-bore characteristics to separate tables. Its 1:12 tapered-bore table, printed 47, distinguishes tolerance classes and notes that its Normal zones are smaller than ISO 492. Do not lift the cylindrical-bore column into this acceptance, treat all “Normal” labels as identical numerical tables, or call an SKF catalogue limit a verified Luan or ISO compliance result. The standard’s complete text has not been reviewed here.
A dimensional report and a mounting acceptance record serve different purposes.
For the purchase, obtain the controlled offered drawing, agreed tolerance document/edition, inspection method and traceable results. Resolve any unclear nominal plane or conflicting requirement with the supplier before judging the delivered part. Do not diagnose a defect from an arbitrary bore reading or from comparison with another maker’s table.
For installation, obtain the separate approved shaft/sleeve arrangement and mounting procedure, including the required mounted-clearance or other completion criterion. A delivered bore conforming to an agreed drawing does not itself prove correct drive-up, operating clearance or successful fit. Conversely, a bearing entering a sleeve is not a substitute for the delivery inspection requirements.
The exact archived Luan row/header and SKF’s exact tapered-bore product entry, general-table cross-reference, tapered-bore table and symbol definitions were read and visually checked. Fresh Luan access on 2026-10-09 failed with a certificate-name error. No Luan taper ratio, tolerance class, inspection limit, measured delivery report or successful mounting has been verified.
A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.
Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.
Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers
168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08
Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.
Ask the manufacturer for these when you enquire.
Request a quote for 22230K.
Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.
Exact archive row/header independently read and actually viewed; units, taper and inspection basis are unstated. Fresh certificate-name failure on 2026-10-09.
PDF804 printed802 exact 22230CCK/W33 tapered column; PDF40/49/51 printed38/47/49 general-table referral, 1:12 tapered-bore characteristics/footnote and theoretical-end definitions. Read, rendered and actually viewed. No taper ratio, numeric limit, class, measurement result or standards compliance assigned to Luan.
Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.
We use cookies and analytics to operate this website and measure visits. Form contents and private workspace pages are excluded from analytics. Privacy & cookies