The source does not state dimension units. Obtain the offered drawing before using these historical values.
Spherical roller
22230W33
22230W33 is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 150 × 270 × 73 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.
A groove name and a lubrication-system decision are different pieces of information.
Before choosing oil because a comparable product is described as having an oil groove, check its complete technical data and the actual application. The system choice depends on thermal and maintenance requirements as well as bearing features.
NTN’s exact 22230EAW33 item names an oil groove and still publishes a grease speed.
The retained exact Luan 22230W33 row [1] gives 150/270/73 with no dimension unit, 1300/1600 r/min grease/oil entries, 508/875 kN dynamic/static ratings and 18.57 kg reference mass. It does not document the offered groove geometry or select a lubricant system for an actual machine.
The item has an explicit grease-labelled speed entry despite the oil-groove wording.
Limiting speed — oil
2300 r/min
A separate oil-labelled entry; it is not the grease entry.
Ring modification
Relube
A feature field, rather than an approval of this buyer’s lubrication system.
Read together, these NTN statements do not support interpreting its groove title as “oil lubrication only.” They also do not approve either method at the published speed for every installation. The identified NTN item is separate from Luan’s offered 22230W33: neither speed, groove construction nor a lubricant approval can be copied across.
Resolve heat removal and maintenance needs before choosing grease or oil.
SKF’s lubrication selection discussion [3], printed 110–111, addresses open bearings and identifies reasons oil may be needed: oil already serves another machine function, circulating lubricant must remove heat, grease replenishment would be unacceptably frequent, or used-grease handling is impractical. These are application and system questions, not consequences of a groove’s name.
For a proposed grease system, obtain an interval assessment for the actual speed, load, temperature, contamination and selected grease. Check whether the required interval and quantities can be delivered with the available access and maintenance resources. A catalogue grease speed does not establish a replenishment schedule, and switching to an automatic supply still needs an approved delivery and purge route.
For a proposed oil system, specify whether it must lubricate only or also remove heat, and identify the actual delivery and return arrangement. Request the offered bearing’s applicable lubricant and system requirements. A higher oil-labelled speed is not evidence that the existing housing already has circulation, cooling or a suitable oil return.
SKF’s flow chart lists grease consistency and base-oil viscosity as separate selection criteria, alongside temperature range, additives and miscibility. A grease grade alone therefore does not provide all the lubricant-selection information. For the actual Luan offer, have the supplier identify the approved product/specification and its operating basis; no grease grade, viscosity, oil flow, cooling capacity or service interval is specified here.
Ask for one coherent bearing-and-system proposal.
Confirm the bearing features. Obtain the actual Luan drawing and unit statement, groove/hole construction and any seal requirements rather than translating another maker’s title into this order.
State the system requirement. Record the actual duty, existing oil uses, heat-removal need, access and acceptable maintenance burden. Identify whether the proposal changes the existing lubrication arrangement.
Obtain the approved method and lubricant. Keep the selection rationale, lubricant identity and replenishment/change requirements with the exact supplied bearing and housing revision.
Resolve implementation and verification. Have the responsible supplier/designer specify the actual inlet/return or purge path, delivery checks and any necessary system changes before accepting the replacement proposal.
The exact archived Luan row/header, current NTN item title and technical fields, and SKF’s open-bearing system-selection text and flow chart were read and visually checked. Fresh Luan access on 2026-10-09 failed with a certificate-name error. No actual Luan oil-only restriction, groove geometry, selected lubrication system, approved lubricant or successful operation has been verified.
A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.
Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.
Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers
168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08
Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.
Ask the manufacturer for these when you enquire.
Request a quote for 22230W33.
Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.
Exact archive row/header independently read and actually viewed; dimension units and system/feature details are unstated. Fresh certificate-name failure on 2026-10-09.
Live exact item read on 2026-10-09; title and technical table actually viewed. Oil-groove wording, grease1800/oil2300 r/min and Relube feature kept in this NTN context; not applied to Luan.
PDF112–113 printed110–111 read, rendered and actually viewed. Heat-removal and other oil uses, replenishment/handling constraints and separate lubricant-selection criteria. No Luan system, interval, lubricant grade or calculation approved.
Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.
We use cookies and analytics to operate this website and measure visits. Form contents and private workspace pages are excluded from analytics. Privacy & cookies