The source does not state dimension units. Obtain the offered drawing before using these historical values.
Spherical roller
22232
22232 is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 160 × 290 × 80 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.
A 22232 quotation needs more than matching dimensions and load ratings.
The Luan listing establishes a historical catalogue entry. It does not identify the offered cage or its shoulder requirements. An exact NSK comparison shows why apparently equal headline specifications cannot replace a complete designation and construction-specific drawing.
Two exact NSK 22232 entries share headline values but describe different cage designs.
The retained Luan 22232 row [1] lists d/D/B entries of 160/290/80 without stated dimension units, grease/oil speeds of 1400/1900 r/min, dynamic/static ratings of 879/1220 kN and reference mass 22.8 kg. Its row does not specify the cage material, internal design or mating shoulder dimensions. Those missing facts cannot be filled from another brand’s 22232.
For a separately identified example, NSK’s exact cylindrical-bore entries, printed C276–C277 [2], show 22232CAME4 and 22232CDE4 with the same d/D/B of 160/290/80 mm, dynamic/static ratings of 1,140,000/1,320,000 N and approximate mass of 23.1 kg. Their four speed fields are also equal: thermal speed rating in oil bath 2200 min⁻¹, mechanical speed with forced oil circulation 2800 min⁻¹, and limiting speeds of 1200 min⁻¹ for grease and 1500 min⁻¹ for oil bath.
Exact NSK designation
Construction described by NSK
Inner-ring abutment dₐ field in the exact row
22232CAME4
CA design with machined-brass cage; M identifies that cage in NSK’s designation example.
Minimum 174 mm; maximum shown as a dash.
22232CDE4
CD design with pressed-steel cage.
Minimum 174 mm; maximum 190 mm.
NSK’s design explanation on printed C258 distinguishes CA from C/CD cages. The exact designation therefore carries information lost in the shorter “22232” label, even where headline dimensions, ratings and speeds coincide. This comparison establishes a reason to request the full offered construction; it does not establish that Luan uses either NSK design or that these products are approved substitutes.
Read the shoulder limits against the drawing, including fields that show a dash.
NSK’s drawing on C276–C277 locates dₐ at the inner-ring abutment and Dₐ at the outer-ring abutment. These are installation dimensions, distinct from the bearing’s bore d and outside diameter D. The CDE4 row’s dₐ maximum cannot be dropped merely because its bore, load ratings and speed fields match the CAME4 row.
The dash in the CAME4 maximum field is not a published zero, a numeric limit or blanket permission for every shoulder geometry. Preserve the source notation and obtain the applicable drawing or maker clarification for the actual arrangement. Do not turn an unfilled catalogue field into an invented manufacturing requirement.
Identify the exact offered bearing. Obtain its maker, full designation, cage/internal design and controlled drawing revision. Keep a proposed construction change visible in the quotation.
Match the physical support surfaces. Mark shaft and housing shoulders, fillets and other adjacent parts on the actual assembly drawing; distinguish bearing boundary dimensions from abutment requirements.
Resolve the offered construction’s limits. Ask Luan for confirmed units, shoulder/fillet requirements and compatibility with those mating parts. A different maker’s drawing supplies neither the missing Luan limits nor permission to machine the shaft.
Retain approval with the order. Have the supplier identify the exact drawing and operating conditions it assessed. If the offered cage or internal design changes, review the resulting requirements before accepting the revised offer.
This review does not calculate fit, clearance, support adequacy or permissible operating duty. A matching envelope and a familiar base code leave those decisions unresolved until the actual offered construction has been assessed.
The confirmed catalogue evidence and the unanswered Luan order details remain separate.
The exact archived Luan 22232 row and its headers were independently read and visually checked. Fresh Luan access on 2026-10-09 failed with a certificate-name error; the retained evidence is not presented as a newly fetched catalogue. NSK’s exact two cylindrical-bore rows, abutment drawing and cage/design explanation were read, rendered and visually checked.
No current Luan controlled drawing, cage statement, shoulder approval, interchange confirmation or operational test has been obtained. Ask for those documents against the complete offered designation. Keep the historical Luan ratings distinct from NSK’s separate ratings and four speed definitions; neither set demonstrates successful operation in the buyer’s machine.
A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.
Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.
Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers
168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08
Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.
Ask the manufacturer for these when you enquire.
Request a quote for 22232.
Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.
Exact plain 22232 row and headers read and visually checked; dimension entries 160/290/80 have no stated unit; 1400/1900 r/min, 879/1220 kN and 22.8 kg retained. Fresh certificate-name error on 2026-10-09. No inferred cage or shoulder geometry.
PDF139 printed C276–C277 exact cylindrical-bore rows, all four speed headings, mass and abutment drawing; PDF130 printed C258–C259 CA machined-brass versus C/CD pressed-steel designs and M designation. Read, rendered and visually checked. NSK-only comparison; dash preserved without inventing a maximum. No NSK construction, units, ratings or mounting limits assigned to Luan.
Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.
We use cookies and analytics to operate this website and measure visits. Form contents and private workspace pages are excluded from analytics. Privacy & cookies