BearingIndex
THE BEARINGINDEX DIRECTORY

22232W33 — 160 × 290 × 80 (unit unconfirmed)

HISTORICAL DIMENSION INTERPRETATIONUNIT UNCONFIRMED

The source does not state dimension units. Obtain the offered drawing before using these historical values.

Spherical roller

22232W33

22232W33 is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 160 × 290 × 80 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.

Bore d
160 unit unconfirmed
Outside D
290 unit unconfirmed
Width B
80 unit unconfirmed

Compare the 1 publication

MODEL-SPECIFIC BUYER GUIDE · SOURCES CHECKED 2026-10-09

A 22232W33 lubrication proposal must explain what moves the oil and where it returns.

A lubrication feature can provide a route into a bearing without establishing the circulation mechanism. If the supplier proposes an oil system, request the complete feed, return and conditioning arrangement; a generic pumping diagram is not evidence for the offered bearing.

A published ring modification does not describe a complete oil circuit.

The retained exact Luan 22232W33 row [1] gives d/D/B entries of 160/290/80 without stated units, grease/oil speeds of 1400/1900 r/min, dynamic/static ratings of 879/1220 kN and reference mass 22.8 kg. It does not document a pump, oil-pickup arrangement, return circuit, flow requirement or validation of an actual oil system.

The separately identified current NTN 22232EAW33 page [2] calls its product a standard-bore spherical roller bearing with an oil groove. Its technical fields identify ring modification as “Relube” and enclosure as “Open.” Those describe the NTN item; they do not demonstrate a self-pumping mechanism, identify Luan’s actual feature geometry or complete a Luan lubrication-system specification.

In a quotation, separate the bearing feature from the mechanism moving lubricant through the assembly. Request the actual offered feature drawing and a circuit identifying the oil source, feed route and return route. If the answer supplies only a groove designation, the circulation question remains open.

SKF’s intrinsic pumping example is a thrust-bearing arrangement, not evidence for this radial model.

SKF’s oil-method explanation and diagrams [3], printed 122–123, distinguish an oil bath, self-circulation by drains/ducts or pickup components, circulation with an external pump, oil jet and oil-air. The text describes the pumping effect of some bearing types and identifies the bearing in figure 6 as a spherical thrust roller bearing; the diagram shows its vertical-shaft arrangement and return path.

This distinction matters when a drawing is offered to explain the 22232W33 proposal. A radial spherical roller bearing cannot be assigned that thrust-bearing example’s pumping behaviour merely because both names contain “spherical roller.” Ask which component supplies circulation in the actual arrangement and what source or validation supports that claim. The SKF text also says the described self-circulating designs should be validated individually by tests.

For externally pumped circulation, SKF lists a pump, filter, reservoir and cooling/heating system. It explains that circulation can remove heat and carry contaminants toward filters or oil/liquid separators, while drainage must prevent oil-level buildup. These are system functions to review, not a published circuit or approved flow for Luan 22232W33.

Review feed, return and oil condition together before accepting the proposed system.

Part of the proposalWhat the supplier should identify
Circulation mechanismThe actual pump, pickup component or other documented mechanism and its operating basis, including shaft orientation and start/stop conditions.
Feed to the offered bearingThe actual housing/bearing route and drawing revision, with maker-confirmed feature dimensions and required supply conditions.
Return and conditioningThe return path, how oil-level buildup is prevented, and the filtration/separation and thermal-control provisions needed for this duty.
Validation and serviceThe actual arrangement’s assessment or test record, oil-condition inspection requirements and agreed service actions.

SKF’s oil-change table distinguishes the operating-condition guidance for oil-bath/pickup arrangements from circulating-oil or oil-jet systems, for which it points to test runs and regular inspection of oil condition, with circulation frequency and cooling affecting the result. Do not select a calendar interval from a different lubrication method and present it as the maintenance schedule for this proposal.

Retain the complete circuit and the offered bearing identity with the purchase enquiry. If circulation depends on a component outside the bearing, include it in the review and parts scope. No flow rate, pressure, jet size, oil level, lubricant grade, filter specification, change interval or application approval is calculated here.

The exact archived Luan row/header, current NTN title and ring-modification/enclosure fields, and SKF’s method text, diagrams and oil-change guidance were read and visually checked. Fresh Luan access on 2026-10-09 failed with a certificate-name error. No current Luan feature drawing, actual oil circuit, supplier validation or successful operational test has been verified.

What each manufacturer published.

ManufacturerDynamic load rating (kN)Static load rating (kN)Limiting speed — grease (rpm)Limiting speed — oil (rpm)Reference mass (kg)Source recorded
Luan Rolling Bearing
22232W33
87912201400190022.82026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

The works that publish 22232W33.

Luan Rolling Bearing

Luan, Anhui, China

Spherical and cylindrical roller bearings

Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.

Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers

168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Luan Rolling Bearing about 22232W33

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.

Ask the manufacturer for these when you enquire.

Request a quote for 22232W33.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Luan Rolling Bearing · 22232W33 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

Sources used for the individual buyer guide

  1. Luan Rolling Bearing · retained exact 22232W33 catalogue row ↗

    Exact 22232W33 row/header independently read and actually viewed; dimension units unstated, 1400/1900r/min, 879/1220kN and22.8kg. Fresh certificate-name error on 2026-10-09. No pump or actual oil circuit published in the examined row.

  2. NTN Americas · exact 22232EAW33 item ↗

    Current exact title and technical Ring Modification Relube / Enclosure Open fields independently read and actually viewed. No circulation capacity, NTN geometry, speed, seal or construction assigned to Luan.

  3. SKF · oil methods, actual pumping-example bearing type and oil-change guidance ↗

    PDF124–125 printed122–123 read/rendered/actually viewed. Figure6 specifically spherical thrust roller bearing, separate external-pump circuit, drainage boundary and method-dependent service evidence. No pumping behaviour, flow, oil interval or SKF system approval assigned to Luan radial22232W33.

Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.