BearingIndex
THE BEARINGINDEX DIRECTORY

22234K — 170 × 310 × 86 (unit unconfirmed)

HISTORICAL DIMENSION INTERPRETATIONUNIT UNCONFIRMED

The source does not state dimension units. Obtain the offered drawing before using these historical values.

Spherical roller

22234K

22234K is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 170 × 310 × 86 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.

Bore d
170 unit unconfirmed
Outside D
310 unit unconfirmed
Width B
86 unit unconfirmed

Compare the 1 publication

MODEL-SPECIFIC BUYER GUIDE · SOURCES CHECKED 2026-10-09

A 22234K bearing rating does not establish the capacity of its housing and base.

A sleeve-mounted proposal also needs an identified housing, mounting surface and load path. Review the actual housing’s material and direction-specific limits against the assembly drawing; catalogue compatibility is one part of that decision.

A published bearing-and-housing combination identifies parts, not the application’s structural capacity.

The retained exact Luan 22234K row [1] lists d/D/B entries of 170/310/86 without stated dimension units, dynamic/static ratings of 983/1380 kN, grease/oil speed entries of 1300/1800 r/min and reference mass 29.2 kg. The examined row does not identify an approved housing, base, mounting bolts or capacity of a complete installed assembly.

As a separately identified manufacturer example, NTN’s plummer-block table, printed G-26–G-27 [2], lists 22234EMKD1 + H3134 with SD534 in the floating-side column and SD534G in the fixed-side column, under shaft diameter d₁ = 150 mm. Keep the complete NTN designation and the two housing roles with that catalogue example. It does not approve the NTN parts or shaft dimension for Luan 22234K.

If a supplier offers a housing for Luan, request its exact maker, designation, material and assembly drawing, then confirm the offered bearing/sleeve combination independently. The words “for heavy loads” in a housing range description do not state the allowable load for the buyer’s installation.

Housing strength depends on the housing, load direction and mounting surface.

NTN’s strength explanation on printed G-13 [2] states that plummer-block breaking strength differs with the block type, load characteristic and direction, and is influenced by mounting-surface flatness. The graphs alongside that explanation are labelled for SN5 and SN6 gray-cast-iron housings. They are not an SD534/SD534G strength table and cannot be treated as a capacity rating for the separate SD example.

Do not extrapolate those SN graphs to a different housing series or use Luan’s 1380 kN static bearing rating as the allowable structural load of the housing, bolts or foundation. The actual assembly review needs the housing supplier’s applicable data and the loads acting through that assembly. Catalogue breaking strength also needs its documented design basis; it is not automatically the permitted working load.

NTN’s mounting-base discussion on printed G-6 says bolt fastening force alone cannot reliably secure a plummer block under a large horizontal load and describes a base abutting a fixed surface, with an appropriately machined contact face. Its strength discussion likewise addresses a fixed abutment for horizontal/axial loads and a flat mounting surface. Use this as a reason to have the actual support and restraint arrangement designed and confirmed; it is not a machining instruction or fastening approval for the Luan proposal.

Give the housing reviewer the physical load path and load cases.

Review itemEvidence to send or request
Assembly identityExact bearing, sleeve and housing construction/material, each tied to the current assembly drawing and supplier compatibility response.
Load direction and characterActual bearing reactions in the housing coordinate system, including static, repeated, alternating and impact/exceptional cases as applicable.
Support and restraintBase flatness/support requirements, fastening arrangement and any fixed abutment/contact face, with the load path into the foundation identified.
Applicable assessmentThe housing supplier’s data for this series/material and load direction, design basis and outstanding conditions; do not substitute another series’ graph.

Ask the supplier to identify what it has assessed and which interface still requires the machine or foundation designer’s review. If the housing material, support face or load direction changes, obtain a revised response. No housing capacity, breaking load, safety factor, bolt torque, machining allowance or foundation adequacy is calculated here.

The exact archived Luan row/header and NTN’s exact SD534/SD534G combination, labelled SN-series strength diagrams and mounting-base explanation were read and visually checked. Fresh Luan access on 2026-10-09 failed with a certificate-name error. No current Luan housing approval, actual structural assessment or operational test has been obtained.

What each manufacturer published.

ManufacturerDynamic load rating (kN)Static load rating (kN)Limiting speed — grease (rpm)Limiting speed — oil (rpm)Reference mass (kg)Source recorded
Luan Rolling Bearing
22234K
98313801300180029.22026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

The works that publish 22234K.

Luan Rolling Bearing

Luan, Anhui, China

Spherical and cylindrical roller bearings

Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.

Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers

168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Luan Rolling Bearing about 22234K

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.

Ask the manufacturer for these when you enquire.

Request a quote for 22234K.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Luan Rolling Bearing · 22234K source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

Sources used for the individual buyer guide

  1. Luan Rolling Bearing · retained exact 22234K row ↗

    Exact 22234K row/header independently read and actually viewed;170/310/86 dimension units unstated,983/1380kN,1300/1800r/min,29.2kg. No actual housing/base approval. Fresh certificate-name error on2026-10-09.

  2. NTN · exact 22234EMKD1 housing combination and housing-strength scope ↗

    PDF365 printedG26–G27 exact SD534 floating / SD534G fixed,22234EMKD1+H3134 and shaftd1=150mm. PDF358 printedG13 strength factors and graph labels SN5/SN6 graycastiron; PDF355 printedG6 largehorizontal-load fixedabutment discussion. Read/rendered/actually viewed. No SN graph applied to SD or Luan, no hardware compatibility or structural capacity/fastening specification invented.

Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.