The source does not state dimension units. Obtain the offered drawing before using these historical values.
Spherical roller
22236
22236 is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 180 × 320 × 86 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.
The 22236 reference mass does not identify a safe lifting point or mounting method.
Prepare the handling arrangement against the actual supplied bearing and assembly drawing. Confirm what is being moved, how it is supported and which tools and instructions apply before the package is opened for mounting.
The 30 kg entry belongs to a historical bearing row, not every load moved during assembly.
The retained exact Luan 22236 row [1] gives d/D/B entries of 180/320/86 without stated dimension units, grease/oil speed entries of 1300/1700 r/min, dynamic/static ratings of 1040/1490 kN and reference mass 30 kg. It supplies no lifting-point drawing, actual delivered weighing record, handling-tool specification or combined shaft/housing mass.
Start the preparation by identifying the physical load to be moved: the loose bearing, a packed item or a partly assembled unit. Confirm the actual mass and geometry with the supplier and the assembly documentation. The historical 30 kg reference cannot be used as the total load for an assembly that includes other components, nor as a verified tool rating.
A bearing handling feature cannot automatically carry an attached assembly.
SKF’s handling guidance [2], printed 200–201, describes dedicated carrying/lifting tools and support from beneath for large, heavy bearings. It says that optional threaded holes in bearing ring side faces can accommodate eye bolts, but those holes are designed for the weight of the bearing only; it also shows loading the eye bolts along their shank axis. These are limits of the described SKF arrangement, not confirmation that Luan 22236 has such holes.
Ask Luan whether the offered bearing has manufacturer-authorized handling features and obtain their drawing and instructions if present. Do not infer a lifting point from an unlabelled opening or copy a catalogue diagram as permission to drill the ring. If a shaft or housing is attached, have the handling plan reviewed for that actual assembly and its authorized support points.
The same SKF section distinguishes handling from installation: mounting force must not pass through rolling elements, and rings, cages, rolling elements or seals must not be struck directly by a hard object. A tool supporting the bearing’s weight is not automatically a fitting tool or a means to force the bearing into its seat. Confirm the actual mounting method and force path separately.
Prepare the work area, drawing and tool sequence before unpacking.
SKF’s mounting guidance on printed 200 [2] calls for necessary parts, tools, equipment and data to be ready, with drawings/instructions reviewed for sequence and orientation. It advises retaining original packaging until immediately before mounting and protecting the bearing and mounting position from contamination when the work area is unprotected.
Identify the movement. Record the complete load, actual mass, orientation and access to the mounting position. Ask the responsible handling specialist to confirm the approved equipment and support arrangement.
Resolve feature use. Obtain the maker’s actual handling instructions and authorized points/surfaces. Keep bearing-only features distinct from those allowed to carry a completed assembly.
Prepare the mounting sequence. Have the controlled bearing/shaft/housing drawings, appropriate fitting tools and maker’s method ready. Identify the force path and acceptance checks independently of the lifting method.
Protect the work. Prepare a clean mounting area and contamination protection; review hot/oily handling conditions when applicable. Open the package when the planned work is ready.
This page selects no tackle, sling geometry, eye-bolt size, safe working load, lifting threshold, fit or mounting force. The exact archived Luan row/header and SKF’s handling, feature restrictions and mounting-preparation guidance were read and visually checked. Fresh Luan access on 2026-10-09 failed with a certificate-name error. No actual Luan lifting feature, handling plan or completed mounting test has been verified.
A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.
Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.
Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers
168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08
Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.
Ask the manufacturer for these when you enquire.
Request a quote for 22236.
Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.
Exact plain 22236 row/header independently read and actually viewed:180/320/86 units unstated,1300/1700 r/min,1040/1490 kN,30 kg reference mass. No actual assembled-load or lifting-feature approval. Fresh certificate-name error on 2026-10-09.
PDF202–203 printed 200–201 read/rendered/actually viewed:dedicated support tools, optional bearing-only side holes and eye-bolt loading axis, no mounting force through rolling elements, preparation/sequence/packaging/contamination. No SKF feature, tool load or mounting method assigned to Luan.
Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.
We use cookies and analytics to operate this website and measure visits. Form contents and private workspace pages are excluded from analytics. Privacy & cookies