BearingIndex
THE BEARINGINDEX DIRECTORY

22236W33 — 180 × 320 × 86 (unit unconfirmed)

HISTORICAL DIMENSION INTERPRETATIONUNIT UNCONFIRMED

The source does not state dimension units. Obtain the offered drawing before using these historical values.

Spherical roller

22236W33

22236W33 is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 180 × 320 × 86 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.

Bore d
180 unit unconfirmed
Outside D
320 unit unconfirmed
Width B
86 unit unconfirmed

Compare the 1 publication

MODEL-SPECIFIC BUYER GUIDE · SOURCES CHECKED 2026-10-09

An NLGI grade alone does not approve a grease for 22236W33.

For a grease-lubricated proposal, ask what happens to the grease under mechanical working and whether the actual water or condensation exposure has been assessed. A consistency label and a bearing speed entry answer different questions from stability and corrosion performance.

The 1300 r/min grease entry names no approved grease or test result.

The exact Luan 22236W33 row inspected live on 9 October 2026 [1] lists d/D/B entries of 180/320/86 without dimension units, grease/oil speed entries of 1300/1700 r/min, dynamic/static ratings of 1040/1490 kN and reference mass 30 kg. It publishes no grease brand, NLGI grade, mechanical-stability result or corrosion-test report for the offered bearing.

SKF’s separately identified 22236 CC/W33 appears in its cylindrical-bore table on printed 804 [2]. Keep that complete construction distinct from Luan 22236W33. Its catalogue entry does not approve an SKF lubricant or transfer SKF operating data to Luan.

If grease is proposed, obtain its exact product identity and current technical data sheet alongside the actual machine conditions. Ask the bearing and lubricant suppliers to confirm suitability together. A statement such as “NLGI 2 grease” leaves the product identity, base oil, thickener, test results and application assessment unresolved.

Consistency, mechanical stability and corrosion protection need different evidence.

SKF’s grease discussion on printed 116 [2] describes consistency as grease stiffness and explains the NLGI classification. On printed 117 it separately describes mechanical stability: grease is mechanically worked during bearing rotation and its consistency can change. SKF references ASTM D217 and/or ASTM D1831 for this assessment. Grease that softens can leak from the bearing cavity; grease that stiffens can restrict rotation or limit oil bleeding.

Those mechanisms do not diagnose an existing Luan installation. They explain why the initial consistency grade alone is insufficient evidence of behaviour in service. Request the actual product’s stability results, test conditions and the lubricant supplier’s interpretation for the proposed operating conditions. Do not assume two greases with the same NLGI grade respond identically to mechanical working.

Where water or condensation is actually present, the same SKF page treats corrosion protection separately and cites the EMCOR test, ISO 11007. It recommends a 0-0 rating for that exposure in its discussion. That is a source-specific selection criterion, not a reported result for Luan or for an unnamed grease. Ask for the exact candidate’s report and test conditions, then have the responsible supplier assess its relevance to the actual environment.

Turn a generic grease recommendation into an assessable response.

QuestionUseful supplier evidence
Which grease?Exact maker/product identity and current technical data, distinguishing consistency from base-oil and thickener information.
How does it behave when worked?Mechanical-stability test results with method and conditions, plus the supplier’s assessment for the actual duty and temperature range.
Is moisture relevant?Actual exposure record and, when relevant, corrosion-test evidence with the tested conditions identified; a generic “water resistant” phrase is insufficient.
What remains to be approved?The bearing/housing lubrication procedure, compatibility with existing lubricant, delivery and maintenance basis, and the checks required by the responsible suppliers.

Keep test evidence separate from an application approval. A laboratory result needs its product identity and conditions; the final response also needs the actual loads, temperatures, speed, environment and assembly details. If leakage, abnormal resistance or temperature change is reported, record the observations and have the cause investigated rather than identifying grease stability as the cause from this page.

The exact Luan row/header, SKF’s exact cylindrical-bore example and the consistency, mechanical-stability and corrosion sections were independently read and visually checked. No grease is selected here, no Luan lubricant test result is available, and no service symptom or operating outcome has been verified.

What each manufacturer published.

ManufacturerDynamic load rating (kN)Static load rating (kN)Limiting speed — grease (rpm)Limiting speed — oil (rpm)Reference mass (kg)Source recorded
Luan Rolling Bearing
22236W33
1040149013001700302026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

The works that publish 22236W33.

Luan Rolling Bearing

Luan, Anhui, China

Spherical and cylindrical roller bearings

Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.

Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers

168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Luan Rolling Bearing about 22236W33

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.

Ask the manufacturer for these when you enquire.

Request a quote for 22236W33.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Luan Rolling Bearing · 22236W33 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

Sources used for the individual buyer guide

  1. Luan Rolling Bearing · exact 22236W33 row, inspected live ↗

    Live inspection 2026-10-09: exact 22236W33 row, dimension units unstated; 180/320/86, 1300/1700 r/min, 1040/1490 kN, reference mass 30 kg. No named grease, stability/corrosion test or lubricant approval. Page title 22311MBW33 is not row identity.

  2. SKF · exact bearing example and grease-property evidence ↗

    PDF 806 / printed 804: exact 22236 CC/W33 cylindrical-bore entry. PDF 118–119 / printed 116–117: consistency, NLGI, mechanical working and ASTM D217/D1831, moisture/corrosion and EMCOR ISO 11007 criterion. Read, rendered and visually checked. No lubricant approval or test result transferred to Luan.

Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.