BearingIndex
THE BEARINGINDEX DIRECTORY

22238W33 — 190 × 340 × 92 (unit unconfirmed)

HISTORICAL DIMENSION INTERPRETATIONUNIT UNCONFIRMED

The source does not state dimension units. Obtain the offered drawing before using these historical values.

Spherical roller

22238W33

22238W33 is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 190 × 340 × 92 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.

Bore d
190 unit unconfirmed
Outside D
340 unit unconfirmed
Width B
92 unit unconfirmed

Compare the 1 publication

MODEL-SPECIFIC BUYER GUIDE · SOURCES CHECKED 2026-10-09

Changing grease for 22238W33 needs more than matching colour or NLGI grade.

Identify what is already in the bearing, housing and delivery equipment before accepting another grease. Review base oil and thickener compatibility separately, and include the bearing preservative if a new bearing is installed.

The bearing row does not identify what can safely be mixed.

The exact Luan 22238W33 row [1], independently inspected from the source acquired on 9 October 2026, lists d/D/B entries of 190/340/92 without dimension units, grease/oil speeds of 1200/1600 r/min, dynamic/static ratings of 1150/1700 kN and reference mass 37.3 kg. It supplies no grease identity, preservative identity or changeover approval.

Before a grease change, record the exact current and proposed products and where each is present: bearing, housing, reservoir or delivery line as applicable. If a new bearing is supplied, ask whether it carries grease or preservative and obtain that product identity too. If the current grease is unknown, keep the compatibility decision unresolved rather than assuming its colour identifies it.

SKF’s separate exact 22238 CC/W33 entry, printed 806 [2], identifies a cylindrical-bore construction. It is technical context only; it does not establish Luan’s initial fill or make SKF’s preservative statement applicable to the delivered Luan bearing.

A chart has two material questions and a separate testing category.

SKF’s discussion on printed 118 [2] warns that mixing incompatible greases can dramatically change consistency and cause severe leakage. Its following page has separate tables for base-oil types and thickener types. Their legends distinguish compatible, incompatible and individual testing required. A mark requiring testing is not a positive compatibility result.

As a concrete reading example, table 7 marks lithium-soap/polyurea thickener combinations as requiring individual testing. That does not establish the result for any two named commercial products. Have the lubricant supplier assess the exact products, including their base oils and thickeners, rather than selecting a chart cell from an incomplete product description.

SKF also discusses compatibility with its own bearing preservation oils and identifies an exception for synthetic fluorinated-oil greases using a PTFE thickener. The scope is explicitly SKF’s preservative treatment. It is a reason to identify the actual Luan preservative and request a compatibility/transition response; it does not authorize a solvent or cleaning method for Luan.

Obtain a transition procedure before replacing the supply.

  1. Establish identity. Gather current/proposed grease product data and any initial fill or preservative information. Mark unidentified material as an outstanding issue.
  2. Request the compatibility decision. Ask the responsible lubricant supplier for the exact product-pair assessment, test basis and any additional testing needed for the intended application.
  3. Agree the transition. Have the bearing, lubricant and equipment suppliers identify any required removal, cleaning or refill procedure for the actual seals, housing and delivery equipment.
  4. Verify and record. Keep the approved procedure revision, product identities, completed work and agreed post-change checks together. Do not treat changing a reservoir label as proof the whole system now contains the new grease.

SKF’s printed 118 discussion says greases from other suppliers require supplier approval. Compatibility is one part of the decision: the proposed lubricant still needs assessment against the actual operating conditions. No mixing ratio, solvent, flush quantity, transition interval or operating permission is prescribed here.

The exact Luan row/header, SKF’s exact bearing entry and its compatibility text, tables and legends were independently read and visually checked. No actual grease mixture, preservative compatibility, changeover test or installed result has been verified for Luan 22238W33.

What each manufacturer published.

ManufacturerDynamic load rating (kN)Static load rating (kN)Limiting speed — grease (rpm)Limiting speed — oil (rpm)Reference mass (kg)Source recorded
Luan Rolling Bearing
22238W33
115017001200160037.32026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

The works that publish 22238W33.

Luan Rolling Bearing

Luan, Anhui, China

Spherical and cylindrical roller bearings

Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.

Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers

168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Luan Rolling Bearing about 22238W33

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.

Ask the manufacturer for these when you enquire.

Request a quote for 22238W33.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Luan Rolling Bearing · 22238W33 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

Sources used for the individual buyer guide

  1. Luan Rolling Bearing · exact 22238W33 row ↗

    Live source acquired 2026-10-09; exact 22238W33 row/header separately inspected and visually checked in retained HTML. 190/340/92 units unstated,1200/1600 r/min,1150/1700 kN,37.3 kg. No grease/preservative identity or compatibility approval.

  2. SKF · exact bearing context and grease compatibility boundaries ↗

    PDF 808 / printed 806 exact 22238 CC/W33 row. PDF 120–121 / printed 118–119 grease mixing and SKF-preservative scope; separate base-oil/thickener tables and individual-testing legend; lithium-soap/polyurea requires individual testing. Text and tables read, rendered and visually checked. No commercial-product compatibility or Luan cleaning procedure inferred.

Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.