BearingIndex
THE BEARINGINDEX DIRECTORY

22240W33 — 200 × 360 × 98 (unit unconfirmed)

HISTORICAL DIMENSION INTERPRETATIONUNIT UNCONFIRMED

The source does not state dimension units. Obtain the offered drawing before using these historical values.

Spherical roller

22240W33

22240W33 is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 200 × 360 × 98 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.

Bore d
200 unit unconfirmed
Outside D
360 unit unconfirmed
Width B
98 unit unconfirmed

Compare the 1 publication

MODEL-SPECIFIC BUYER GUIDE · SOURCES CHECKED 2026-10-09

An EP/AW grease label does not establish suitability for 22240W33.

Review the proposed grease against the actual lubrication condition, temperatures and environment. The bearing’s catalogue load rating does not describe its operating load, and an additive claim does not replace product-specific evidence.

1290 kN is a catalogue rating, not the operating load used to select grease.

The exact Luan 22240W33 row [1], independently checked from today’s retained source, lists d/D/B entries of 200/360/98 without dimension units, grease/oil speed entries of 1100/1500 r/min, dynamic/static ratings of 1290/1910 kN and reference mass 43.2 kg. It identifies no grease, additive package, actual operating load or lubricant test.

SKF’s separately identified 22240 CC/W33 appears on printed 806 [2]. Its complete construction remains a SKF example; neither it nor the Luan row establishes the lubrication condition of the buyer’s machine. Before assessing a grease proposal, provide actual loads, speed, temperatures and supply arrangement, and resolve the offered drawing’s dimension units.

Ask for the lubrication-condition basis behind the EP/AW recommendation.

SKF’s discussion on printed 118 [2] evaluates lubrication condition using the grease’s base-oil viscosity and discusses EP/AW additives where the viscosity ratio κ is below 1. This is an application-dependent reason for an additive proposal. It does not say that a bearing with a high catalogue load rating automatically needs any product sold as “extreme pressure.”

Request the lubricant supplier’s assessment for the exact product and actual duty, with its inputs and conditions stated. Keep consistency grade, base-oil behaviour and additive information separate. No viscosity ratio is calculated here from the source’s unit-unconfirmed dimensions, and no additive or grease product is selected for Luan.

The same source describes conditions that require careful testing.

On printed 118 [2], SKF explains that commonly used sulphur-phosphorus EP/AW additives can adversely affect fatigue life through chemical processes in the presence of humidity, with the effect increasing with temperature. In that discussion it calls for careful testing when using EP/AW lubricants above 80 °C. It then explicitly distinguishes its own tested SKF greases and their high-temperature performance limit.

Keep those statements in their stated scope. The 80 °C discussion is not a universal Luan operating ceiling, an instruction to reject every additive or proof that an unnamed grease is suitable below that value. SKF’s statement about its tested greases does not establish a test result for another supplier’s grease or a Luan assembly.

Ask the proposing supplier to identify the relevant additive information and test/application basis for the actual temperatures and moisture exposure. If either is unknown, record the missing input. Do not infer a corrosion or fatigue failure in an existing machine from this general mechanism alone.

Keep the recommendation, test evidence and remaining conditions together.

  1. Identify the product. Exact maker/name and current data sheet, with base-oil, thickener and available additive information.
  2. Define the case. Actual load/speed/temperature states and moisture exposure, distinguishing measured inputs from assumptions.
  3. Obtain the assessment. The supplier’s explanation for the proposed lubricant and relevant test basis, including the limits of the evidence.
  4. Resolve implementation. Confirm compatibility, delivery and maintenance instructions for the actual assembly with the responsible suppliers before adopting the proposal.

The exact Luan row/header, SKF’s exact bearing example and its additive/lubrication-condition discussion were independently read and visually checked. No actual lubricant test, operating symptom, fatigue outcome or Luan application approval has been verified.

What each manufacturer published.

ManufacturerDynamic load rating (kN)Static load rating (kN)Limiting speed — grease (rpm)Limiting speed — oil (rpm)Reference mass (kg)Source recorded
Luan Rolling Bearing
22240W33
129019101100150043.22026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

The works that publish 22240W33.

Luan Rolling Bearing

Luan, Anhui, China

Spherical and cylindrical roller bearings

Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.

Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers

168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Luan Rolling Bearing about 22240W33

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.

Ask the manufacturer for these when you enquire.

Request a quote for 22240W33.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Luan Rolling Bearing · 22240W33 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

Sources used for the individual buyer guide

  1. Luan Rolling Bearing · exact 22240W33 row ↗

    Live source acquired 2026-10-09; exact 22240W33 row/header independently inspected and visually checked. 200/360/98 units unstated,1100/1500 r/min,1290/1910 kN,43.2 kg. No actual duty, additive or lubricant test.

  2. SKF · exact bearing context and conditional EP/AW assessment ↗

    PDF808 / printed806 exact 22240 CC/W33 row. PDF120 / printed118: lubrication condition uses grease base-oil viscosity; conditional EP/AW discussion, sulphur-phosphorus/moisture/temperature effects and careful testing above80°C; SKF tested-grease statement stays scopedSKF. Read, rendered and visually checked. No additive, universal temperature ceiling, diagnosis or Luan approval inferred.

Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.