The source does not state dimension units. Obtain the offered drawing before using these historical values.
Spherical roller
22308K
22308K is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 40 × 90 × 33 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.
For 22308K, ask which assembly state a quoted width describes.
A bearing width, a sleeve dimension and the space needed to mount or remove the assembly are different quantities. Have the proposed components drawn in their relevant states before accepting a sleeve kit.
The Luan bearing row does not define a complete sleeve assembly.
The exact Luan 22308K row [1] lists d/D/B entries of 40/90/33 without dimension units, grease/oil speed ratings of 4000/5000 r/min, dynamic/static ratings of 73.5/90.5 kN and reference mass 1.03 kg. It names no approved sleeve, actual shaft diameter, assembled width or removal clearance.
SKF’s separate bearing table, printed 792 [2], lists the tapered-bore 22308 EK with bearing dimensions 40/90/33 mm. Its adapter and withdrawal tables then show specific combinations for a 35 mm shaft. That SKF shaft dimension is distinct from the bearing bore entry; neither is approved for the offered Luan assembly here.
Specify whether the enquiry concerns the bearing alone or a complete kit. Ask for the maker-approved parts list, actual shaft and seating arrangement, rather than using the Luan reference mass or width as a complete-assembly value.
Read the withdrawal-table footnote before using B₂ as an installed width.
The actual SKF adapter and withdrawal tables on printed 824 and 832 [2] distinguish these specific examples. They show how dimensions must remain tied to their component and assembly state:
Exact SKF combination
Published dimensions and state
What remains to be drawn for the actual proposal
22308 EK + H 2308
Adapter combination at shaft d₁ = 35 mm; D = 90 mm and bearing B = 33 mm. The sketch separately labels an abutment dimension Bₐ.
Complete adapter/locking envelope, axial support and accessible mounting/removal space.
22308 EK + AH 2308
Withdrawal combination at shaft d₁ = 35 mm; D = 90 mm and bearing B = 33 mm; B₂ ≈ 43 mm.
The B₂ footnote defines width before the sleeve is driven into the bearing bore. Obtain the final installed envelope separately.
The withdrawal sketch labels B and B₂ separately, and the footnote explicitly identifies B₂ as the pre-drive-up width. The 43 mm entry therefore supplies neither a final assembled width nor a required removal clearance. Conversely, the bearing’s 33 mm B alone leaves sleeve and locking-component projections unresolved.
Do not replace H 2308 with AH 2308 solely because both SKF examples use a 35 mm shaft. Have the actual Luan bearing/sleeve, supporting surfaces and locking arrangement approved together. Their mounting and removal interfaces need their own drawings and instructions.
Ask for the assembly before mounting, after mounting and during removal.
Before mounting: identify the bearing, sleeve and locking parts, their orientation and the datum for every dimension. Show the starting space and access required by the approved procedure.
After mounting: show the final component projections and supported surfaces, the specified axial location and the maker-approved fit/locking acceptance. Distinguish this from a catalogue pre-drive-up width.
For removal: show accessible threads or other specified interfaces, obstruction limits and the equipment envelope under the applicable maker instructions. Do not equate bearing width with working clearance.
Include the actual housing, adjacent shoulders and other nearby parts in those views. A supplier can then address physical access and positioning against the machine drawing instead of answering only whether the bearing number appears in a sleeve table.
The exact Luan row/header and SKF bearing, adapter and withdrawal rows, sketches and B₂ footnote were independently read and visually checked. No final Luan assembly width, shaft approval, sleeve compatibility, drive-up distance, nut setting or tool clearance is calculated here. No assembly has been physically measured or mounted.
A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.
Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.
Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers
168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08
Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.
Ask the manufacturer for these when you enquire.
Request a quote for 22308K.
Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.
Source acquired2026-10-09; exact22308K row/header independently read and visually checked.40/90/33 dimension units unstated;4000/5000r/min;73.5/90.5kN;1.03kg. No sleeve or assembly dimensions.
PDF794 / printed792 exact tapered22308EK. PDF826 / printed824 exact H2308 adapter at shaft35mm; PDF834 / printed832 exact AH2308 withdrawal at shaft35mm,B2approx43mm and pre-drive-up footnote. Actual rendered rows/sketches/footnote viewed; no SKF parts or final assembly envelope assigned to Luan.
Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.
We use cookies and analytics to operate this website and measure visits. Form contents and private workspace pages are excluded from analytics. Privacy & cookies