The source does not state dimension units. Obtain the offered drawing before using these historical values.
Spherical roller
22308W33
22308W33 is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 40 × 90 × 33 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.
Confirm 22308W33’s actual lubrication features; one suffix cannot describe every design.
Use the complete manufacturer designation and drawing to identify the bearing’s feed features. A comparison part without W33 in its name may still have a groove and holes, while another W variant can specify a different arrangement.
Luan’s W33 row does not draw the lubrication features.
The exact Luan 22308W33 row [1] lists d/D/B entries of 40/90/33 without dimension units, grease/oil speed ratings of 4000/5000 r/min, dynamic/static ratings of 73.5/90.5 kN and reference mass 1 kg. It does not illustrate a groove, specify hole geometry or show the housing supply route.
The independently checked plain 22308 row has reference mass 1.03 kg. That numerical difference is not evidence of the reason for the difference or a measurement of material removed for lubrication features. Request the maker’s drawing and complete construction rather than deriving holes or groove dimensions from mass.
SKF’s 22308 E example already has lubrication features in its design definition.
SKF’s exact cylindrical-bore model row, printed 792 [2], lists 22308 E. Its E design definition on printed 790 states that the 213, 222 and 223 series include an outer-ring annular groove and three lubrication holes. The design description therefore matters even though W33 is absent from that model name.
That finding belongs to SKF’s E construction and cannot define Luan 22308W33 or the nearby plain Luan 22308. When comparing quotations, ask each maker for its complete design and feature drawing. Do not label a part “without oil holes” solely because the quoted name omits W33.
SKF’s own lubrication suffix definitions on printed 791 also distinguish several arrangements:
SKF suffix
Feature in SKF’s definition
W
No outer-ring annular groove or lubrication holes.
W33
Outer-ring annular groove and three lubrication holes.
W33X
Outer-ring annular groove and six lubrication holes.
W77
W33 lubrication holes plugged.
This table explains why incomplete suffixes can hide a physical difference. It does not establish that any of these variants is available or approved for the offered Luan bearing, and it is not a Luan designation dictionary.
Move from the name to a marked bearing-and-housing drawing.
Obtain the maker’s feature definition. Request the complete Luan designation, groove and hole locations/count, relevant dimensions with units and any plug arrangement. Have the manufacturer resolve any discrepancy between the quotation and drawing.
Identify the actual supply interface. Ask the supplier/designer to show the housing inlet and path to the confirmed bearing features in the installed assembly. A catalogue groove description alone leaves that connection unresolved.
Agree the applicable lubrication instructions. Identify the lubricant and actual duty for review, and obtain the approved operating/maintenance instructions. A W33 name does not supply a lubricant choice, delivery quantity or relubrication interval.
The exact Luan W33 and plain rows/header, exact SKF 22308 E entry and complete E/W design definitions were independently read and visually checked. No Luan hole count, groove dimensions, plug condition, cross-brand compatibility or complete feed circuit is inferred here. No delivered bearing or lubrication flow has been inspected or tested.
A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.
Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.
Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers
168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08
Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.
Ask the manufacturer for these when you enquire.
Request a quote for 22308W33.
Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.
Source acquired 2026-10-09; exact W33 and plain rows/header independently read and visually checked. W33:40/90/33 dimension units unstated,4000/5000 r/min,73.5/90.5 kN,1 kg; plain mass1.03 kg. No explanation of mass difference or feature geometry.
PDF794 / printed792 exact cylindrical22308E row. PDF792–793 / printed790–791 E construction for213/222/223 and W/W33/W33X/W77 definitions; actual rendered pages viewed and text read. SKF naming rules not assigned to Luan.
Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.
We use cookies and analytics to operate this website and measure visits. Form contents and private workspace pages are excluded from analytics. Privacy & cookies