The source does not state dimension units. Obtain the offered drawing before using these historical values.
Spherical roller
22310K
22310K is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 50 × 110 × 40 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.
For a 22310K sleeve proposal, confirm the washer interface as well as the sleeve number.
A suffix can specify a physical locking interface. Ask for the sleeve and matched washer drawings together, especially when a quotation shortens the designation or substitutes a component from another maker.
NSK’s example is H 2310X, paired with its own 22310EAKE4.
The exact Luan 22310K row [1] lists d/D/B entries of 50/110/40 without dimension units, grease/oil speeds of 3400/4300 r/min, dynamic/static ratings of 128/170 kN and reference mass 1.9 kg. It gives no sleeve designation or washer/locking-interface specification.
NSK’s actual adapter table, printed C349 [2], pairs 22310EAKE4 + H 2310X at shaft d₁ = 45 mm and nominal bearing bore d = 50 mm. The table separately labels the sleeve component as A 2310X. Keep those component identities and the complete paired bearing; a quotation containing only “2310 sleeve” leaves the maker and form unresolved.
This NSK example does not approve a 45 mm shaft, H 2310X, A 2310X or the NSK bore construction for Luan. Obtain the actual offered Luan bearing and matched assembly drawing with confirmed units.
The NSK X remark specifies narrow slits and washers with straight tabs.
The remark under the actual adapter table [2] defines X as an adapter sleeve with a narrow slit and states that a washer with straight tabs should be used. This is a physical component requirement in NSK’s example, not a decorative suffix.
Have the supplier identify the actual washer and show the relevant tab/slit interface. Do not approve a washer merely because its nominal size looks familiar, and do not remove X when passing the NSK comparison reference between purchasing and the assembler.
The remark belongs to NSK’s stated adapter design. It does not supply a universal washer instruction for Luan, a tab dimension, a locking setting or permission to modify a delivered washer. A cross-brand or changed component needs approval of the complete actual locking assembly.
Put the matching interface and approved components into the quote.
Point to resolve
Supplier response needed
Which sleeve form?
Full maker designation and controlled drawing, retaining the suffix and identifying the sleeve component separately.
Which washer or locking device?
Exact approved identity and drawing of the relevant interface; explain how it matches the actual sleeve.
What is included or substituted?
Complete supplied-parts list and explicit approval for any changed component, tied to the actual offered Luan bearing.
How is assembly accepted?
Applicable maker mounting/locking instructions and the identification, fit and locking records required for acceptance.
Send the actual shaft and support drawing with this request. Keep component matching separate from axial positioning and from the fit acceptance: identifying a washer form alone does not settle either of those assembly requirements.
The exact Luan row/header and NSK paired bearing, shaft/bore headings, separate sleeve identity, actual sketches and X remark were independently read and visually checked. No Luan sleeve compatibility, washer dimensions, modification, locking torque or installed fit is approved here. No delivered locking set has been inspected or assembled.
A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.
Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.
Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers
168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08
Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.
Ask the manufacturer for these when you enquire.
Request a quote for 22310K.
Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.
Source acquired 2026-10-09; exact K row/header independently read and visually checked.50/110/40 units unstated;3400/4300 r/min;128/170 kN;1.9 kg. No sleeve or washer specification.
PDF175 / printedC348–C349 actual22310EAKE4+H2310X row, shaft45mm/bore50mm, A2310X sleeve-component column, sketches and X narrow-slit/straight-tab-washer remark. Actual spread rendered and viewed, text read. NSK parts and washer requirement not approved for Luan.
Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.
We use cookies and analytics to operate this website and measure visits. Form contents and private workspace pages are excluded from analytics. Privacy & cookies