BearingIndex
THE BEARINGINDEX DIRECTORY

22310W33 — 50 × 110 × 40 (unit unconfirmed)

HISTORICAL DIMENSION INTERPRETATIONUNIT UNCONFIRMED

The source does not state dimension units. Obtain the offered drawing before using these historical values.

Spherical roller

22310W33

22310W33 is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 50 × 110 × 40 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.

Bore d
50 unit unconfirmed
Outside D
110 unit unconfirmed
Width B
40 unit unconfirmed

Compare the 1 publication

MODEL-SPECIFIC BUYER GUIDE · SOURCES CHECKED 2026-10-09

The same 4300 speed number can describe different lubrication conditions.

Luan lists 4300 r/min under Oil for 22310W33. NSK lists 4300 min⁻¹ under Grease for its 22310EAE4. A buyer comparing only the numbers would miss the different rating labels and complete bearing constructions.

The row identifies an oil rating, but does not describe the oil system.

The exact Luan 22310W33 row and header [1] give d/D/B entries of 50/110/40 without dimension units, grease speed 3400 r/min, oil speed 4300 r/min, dynamic/static ratings 128/170 kN and reference mass 1.85 kg.

The column says Oil. It does not identify an oil-bath arrangement, a forced-circulation system, a thermal reference standard or the conditions for the published value. The row also does not specify the groove/hole geometry or a complete internal design. Ask Luan for those details for the actual offered bearing.

Keep 4300 attached to its published label. It is not enough evidence to approve continuous machine operation at 4300 r/min, or to rename the value as an ISO thermal or forced-circulation rating.

An exact NSK comparison shows why “oil speed” needs a definition.

NSK’s exact 22310EAE4 product page [2] identifies a cylindrical-bore bearing, with 50/110/40 mm dimensions and dynamic/static ratings 246,000/234,000 N. These are NSK’s own specifications, not confirmation of Luan’s dimension units, internal design or interchangeability.

NSK 22310EAE4 fieldPublished valueDefinition on the exact product page
Thermal Speed Rating (Oil-bath)4800 min⁻¹Oil-bath lubrication under the conditions outlined in ISO 15312.
Mechanical (forced-circulation oil)7100 min⁻¹Properly designed and controlled forced-circulation oil lubrication.
Grease4300 min⁻¹Grease lubrication.
Oil (Oil-bath)5300 min⁻¹Oil-bath lubrication.

Luan’s oil 4300 and NSK’s grease 4300 have the same numerical value but different labels. Even the three oil-related NSK fields are separately defined. Do not combine them into one oil limit, compare the highest number as a performance ranking, or transfer NSK’s definitions to Luan.

Have the supplier connect the proposed speed to your actual lubrication arrangement.

  1. Identify the rating being used. Request its definition and conditions for the complete offered Luan designation. A quote should not silently substitute an NSK grease, thermal or mechanical figure.
  2. Describe the machine system. Provide the housing arrangement, lubricant specification, oil level or supply/return design, relevant seals, load cases, speed sequence and available temperature records. Identify missing information.
  3. Obtain a duty-specific assessment. Ask the supplier/designer whether the proposed bearing and lubrication system suit the required continuous and transient operation, and what system changes or operating restrictions are required.
  4. Agree commissioning evidence. Require the approved operating instructions, checks and acceptance criteria for the actual proposal; keep catalogue ratings separate from measured machine results.

The exact Luan row/header and NSK 22310EAE4 speed fields, units and explanatory text were independently read and visually checked. No permitted machine speed, oil quantity, flow, temperature threshold or cross-brand replacement is calculated or approved here. No machine or lubricant has been tested.

What each manufacturer published.

ManufacturerDynamic load rating (kN)Static load rating (kN)Limiting speed — grease (rpm)Limiting speed — oil (rpm)Reference mass (kg)Source recorded
Luan Rolling Bearing
22310W33
128170340043001.852026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

The works that publish 22310W33.

Luan Rolling Bearing

Luan, Anhui, China

Spherical and cylindrical roller bearings

Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.

Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers

168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Luan Rolling Bearing about 22310W33

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.

Ask the manufacturer for these when you enquire.

Request a quote for 22310W33.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Luan Rolling Bearing · 22310W33 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

Sources used for the individual buyer guide

  1. Luan Rolling Bearing · exact 22310W33 row and rating header ↗

    Acquired 2026-10-09. Exact row/header independently read and viewed:50/110/40 dimension units unstated; grease3400/oil4300r/min;128/170kN;1.85kg. Oil system/rating conditions not specified.

  2. NSK · exact 22310EAE4 specifications and speed definitions ↗

    Read and visually checked 2026-10-09: cylindrical50/110/40mm,246000/234000N. Thermal oil-bath4800min^-1 ISO15312 conditions; mechanical7100 properly designed/controlled forced circulation; grease4300; oil-bath5300. NSK conditions not assigned to Luan.

Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.