BearingIndex
THE BEARINGINDEX DIRECTORY

22313 — 65 × 140 × 48 (unit unconfirmed)

HISTORICAL DIMENSION INTERPRETATIONUNIT UNCONFIRMED

The source does not state dimension units. Obtain the offered drawing before using these historical values.

Spherical roller

22313

22313 is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 65 × 140 × 48 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.

Bore d
65 unit unconfirmed
Outside D
140 unit unconfirmed
Width B
48 unit unconfirmed

Compare the 1 publication

MODEL-SPECIFIC BUYER GUIDE · SOURCES CHECKED 2026-10-09

“Steel cage” alone does not describe the complete 22313 internal design.

Ask where the guide ring is centred and how the cages and inner ring are constructed when reviewing an alternative. SKF’s 22313 E sits exactly at a published 65 mm boundary within its own E-design rule; that detail cannot be filled into Luan’s shorter row.

The published row records ratings, without naming the internal guide construction.

The exact Luan 22313 row/header [1] list d/D/B entries 65/140/48 without dimension units, grease/oil speeds 2400/3200 r/min, dynamic/static ratings 188/252 kN and reference mass 3.6 kg. The row does not specify cage material/type, inner-ring flanges or guide-ring construction.

SKF’s exact cylindrical-bore 22313 E row, printed 794 [2], gives 65/140/48 mm, dynamic/static ratings 357/360 kN and mass 3.75 kg. Those values identify that SKF part; they do not confirm Luan’s unit, internal arrangement or interchangeability.

Do not complete a supplier’s “steel cage” statement with another maker’s internal-design description. Request the offered bearing’s own complete construction before treating two proposals as equivalent.

SKF’s own E-design rule changes the guide-ring centering above 65 mm.

SKF’s design discussion on printed 775 and designation definition on printed 790 [2] describe its E design with two stamped window-type steel cages and an inner ring without flanges. The floating guide ring is centred on the inner ring at d ≤ 65 mm, and on the cages at d > 65 mm.

Exact SKF entryPublished boreApplicable SKF E-design centering branch
22313 Ed = 65 mmAt the included boundary d ≤ 65 mm: guide ring centred on the inner ring.
22314 Ed = 70 mmAbove the boundary d > 65 mm: guide ring centred on the cages.

Both exact rows appear on printed 794. Their E design and steel-cage description do not mean every internal detail is identical. The boundary is stated in terms of SKF bearing bore d, not an unrelated machine-shaft dimension or a guessed Luan unit.

This is a reading of SKF’s own design rule and actual rows. It does not establish Luan’s guide-ring position, the construction of another maker’s E code or a superiority ranking between centering arrangements.

Carry the actual construction into the proposal and acceptance record.

  1. Identify the complete candidates. Obtain the required existing specification and each offered maker/designation. Request cage material and type, guide-ring arrangement, bore form, clearance and lubrication features from each candidate’s own documentation.
  2. Record the differences explicitly. Keep dimensions and units separate from internal construction. If a seller describes a candidate only as “steel cage,” request the missing design information instead of borrowing it from the SKF example.
  3. Assess the actual duty. Give the responsible supplier/designer the load and speed cases, lubricant, temperatures and vibration/impact conditions where present. Ask which complete construction was assessed and which differences were accepted.
  4. Preserve the accepted identity. Retain the complete agreed design and document revision on the quote, order and receiving record. Missing construction information remains unresolved until the maker supplies it.

The exact Luan row/header, SKF 22313 E and 22314 E rows, and actual E-design text, boundary definition and construction figure were independently read and visually checked. No Luan cage/guide-ring confirmation, comparative performance test or application-specific substitution approval has been obtained.

What each manufacturer published.

ManufacturerDynamic load rating (kN)Static load rating (kN)Limiting speed — grease (rpm)Limiting speed — oil (rpm)Reference mass (kg)Source recorded
Luan Rolling Bearing
22313
188252240032003.62026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

The works that publish 22313.

Luan Rolling Bearing

Luan, Anhui, China

Spherical and cylindrical roller bearings

Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.

Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers

168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Luan Rolling Bearing about 22313

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.

Ask the manufacturer for these when you enquire.

Request a quote for 22313.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Luan Rolling Bearing · 22313 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

Sources used for the individual buyer guide

  1. Luan Rolling Bearing · exact 22313 row and headers ↗

    Acquired 2026-10-09; exact22313 row/header independently read/viewed:65/140/48 units unstated;2400/3200r/min;188/252kN;3.6kg. No cage/inner-ring/guide-ring construction.

  2. SKF · exact 22313 E row and E-design guide-ring boundary ↗

    PDF796 / printed794 exact22313E65/140/48mm357/360kN3.75kg and22314E d70mm. PDF777 / printed775 E-design text/figure; PDF792 / printed790 definition:two stampedsteel cages, flangelessinner, guide ring centredinner d<=65 vs cages d>65. Actual pages read/rendered/viewed; no Luan construction or comparative performance inferred.

Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.