BearingIndex
THE BEARINGINDEX DIRECTORY

22316 — 80 × 170 × 58 (unit unconfirmed)

HISTORICAL DIMENSION INTERPRETATIONUNIT UNCONFIRMED

The source does not state dimension units. Obtain the offered drawing before using these historical values.

Spherical roller

22316

22316 is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 80 × 170 × 58 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Anhui province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.

Bore d
80 unit unconfirmed
Outside D
170 unit unconfirmed
Width B
58 unit unconfirmed

Compare the 1 publication

MODEL-SPECIFIC BUYER GUIDE · SOURCES CHECKED 2026-10-09

A stock date alone does not establish that 22316 is ready to mount.

For a bearing supplied from inventory, ask what has actually been stored, under what conditions and what release decision applies to that item. Keep the current offer and its condition records separate from the historical catalogue row.

The published row does not establish a delivered bearing’s date or preservation.

The exact Luan 22316 row/header [1] list d/D/B entries 80/170/58 without dimension units, grease/oil speeds 1900/2600 r/min, dynamic/static ratings 288/405 kN and reference mass 6.4 kg. They do not state the offered item’s manufacture date, packaging condition, preservative, initial fill or inventory history.

Request the actual offered designation and label information with the current drawing. Ask the supplier to explain any date code rather than interpreting the directory source date as a production date. Identify whether the quotation covers one item or several batches, and which records apply to each.

If the bearing has been opened, inspected or repacked, ask when, why and by whom. A new outer package does not itself document the preceding condition or prove that the bearing received an approved inspection. Conversely, age or repacking alone does not diagnose damage. Keep facts and unresolved questions separate.

Open and sealed stock do not have one interchangeable preservation history.

SKF’s handbook, printed 41 [2], distinguishes its preserved open bearings—approximately five years’ corrosion protection with appropriate storage—from sealed bearings, whose storage is lubricant-limited to three years. It recommends retaining original unopened packaging until mounting. These SKF statements do not assign a storage limit or condition to Luan 22316.

Ask Luan to identify the actual supplied construction and protection. If a supplier proposes cleaning, re-preservation or inspection, obtain a procedure applicable to that construction and its existing condition. Do not improvise removal of seals or initial lubricant to imitate an open-bearing process.

If packaging or history raises a question, document the observed condition and request a responsible disposition. A photograph may document a visible packaging feature; it does not replace a required bearing inspection, prove internal cleanliness or establish remaining operating life.

Agree which records are needed before inventory becomes an accepted installation item.

Offer condition to clarifyResponse and evidence to request
Unopened original package claimedIdentifiable item/batch and original label, date-code interpretation, available storage history and the maker’s current preservation guidance.
Opened or repacked stockReason/date/responsible party, records of any inspection or preservation work, material identity and the approved basis for release.
Uncertain storage or visible concernActual observations and known history, gaps clearly marked, and a maker-approved decision on further inspection or other disposition.
Accepted for the proposed installationIdentified item and condition, completed required checks, unresolved findings closed by the responsible party and the applicable assembly/lubrication instruction.

Put the offer’s item identity, available condition records and intended duty into the enquiry. Ask the supplier to return the missing facts and the proposed acceptance route. Do not promise a fixed remaining lifetime from a warehouse date or describe inventory as inspected when no inspection record exists.

The exact Luan row/header and actual SKF storage page were independently read and visually checked. No Luan stock, package, preservative, date code or physical bearing has been inspected here. No Luan storage expiry, cleaning material, re-preservation process or mounting release has been assigned.

What each manufacturer published.

ManufacturerDynamic load rating (kN)Static load rating (kN)Limiting speed — grease (rpm)Limiting speed — oil (rpm)Reference mass (kg)Source recorded
Luan Rolling Bearing
22316
288405190026006.42026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

The works that publish 22316.

Luan Rolling Bearing

Luan, Anhui, China

Spherical and cylindrical roller bearings

Lu’an Rolling Bearing publishes LZ spherical and cylindrical roller bearings, non-standard bearings and rolling elements. Its multi-model tables must be read by the exact row designation. Request the offered drawing, confirmed dimension units and complete construction before approving a replacement.

Published ranges: Spherical roller bearings · Cylindrical roller bearings · Nonstandard bearings · Spherical and cylindrical rollers

168 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Luan Rolling Bearing about 22316

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.

Ask the manufacturer for these when you enquire.

Request a quote for 22316.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Luan Rolling Bearing · 22316 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

Sources used for the individual buyer guide

  1. Luan Rolling Bearing · exact 22316 row and headers ↗

    Acquired 2026-10-09; exact row/header independently read/viewed:80/170/58 units unstated;1900/2600r/min;288/405kN;6.4kg. Delivered stock condition unspecified.

  2. SKF · Bearing maintenance handbook, bearing storage ↗

    Printed 41 independently read/rendered/viewed. SKF condition-specific guidance; no Luan storage approval inferred.

Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.