Both reviewed catalogues list GE15ES-2RS bore 15 mm, outside diameter 26 mm, inner-ring width B 12 mm and outer-ring width C 9 mm. They also give an 8° angle entry. Additional interface symbols and load units remain manufacturer-specific; these three boundary dimensions do not approve the articulating assembly.
Spherical plain
GE15ES-2RS
GE15ES-2RS is a spherical plain designation documented on BearingIndex from 2 manufacturer publications. The published boundary dimensions are 15 × 26 × 12 mm. The publishing works are in Zhejiang province, China. Every value below comes from that manufacturer’s own published material, with the date it was recorded.
The two GE15ES-2RS catalogues agree on the envelope, but do not supply the same load evidence.
Jingjiu and Wuling both pair GE15ES with GE15ES-2RS in their spherical plain bearing tables, listing 15×26×12 mm and outer-ring width 9 mm. Jingjiu explicitly labels dynamic/static loads in kN; Wuling prints different load numbers without a stated unit. Jingjiu also places the paired row in its requiring-maintenance catalogue. Choose a manufacturer and delivered construction first, then assess its complete joint, lubrication route and motion.
No corresponding chamfer entries in the examined table.
Angle entry
a° ≈ 8.
a° 8.
Locate the shaft-side and housing-side faces separately using B and C. Their nominal 3 mm width difference does not specify an assembly gap, endplay or a spacer thickness: the controlled drawing must define the face positions and adjacent hardware. Likewise, Jingjiu’s bearing-chamfer minima are not a stated maximum mating shoulder radius and cannot be transferred into Wuling’s omitted chamfer fields.
The d1 headers also differ: Wuling expressly labels a minimum, while Jingjiu’s table uses d1 without that qualifier. Keep each value with its own drawing and definition. Do not combine Wuling’s minimum label, Jingjiu’s dk value and a third-party tolerance into one manufactured part specification.
The section depicts a° between the shaft and housing axes. Jingjiu labels its value approximate. Neither examined row specifies the permissible motion under the buyer’s seals, loading and surrounding hardware, or a frequency for repeated oscillation. Submit the actual angular path and assembly clearances for confirmation rather than treating 8° as an unconditional dynamic operating allowance.
Wuling’s 17/85 entries cannot be compared with Jingjiu’s 16/84 kN until their unit is confirmed.
Manufacturer publication
Dynamic / static entries
Published mass
What belongs in the quotation
Jingjiu [1]
16 / 84 kN; unit explicitly headed.
≈ 0.027 kg.
Ratings for this manufacturer’s paired row, with selected sealed construction and application assessment.
Wuling [3]
17 / 85; no load unit stated on the image.
0.025 kg.
Written load units and rating definitions before numerical comparison or acceptance.
The geometry agreement does not authorise assigning Jingjiu’s kN header to Wuling’s image. The larger-looking 17/85 numbers therefore do not establish a stronger Wuling bearing. Request each candidate’s current rating definition, sliding-contact construction and assessment for the actual joint loading and motion.
The catalogue masses differ by 0.002 kg, or 2 g, and Jingjiu expressly marks its weight approximate. This difference is not a quality ranking or a receiving tolerance. Confirm the offered sealed assembly and its reference mass rather than assuming one manufacturer’s figure belongs to both.
Wuling’s historical directory record contains only its three boundary dimensions. Its missing load and mass cells do not mean zero or prove that the factory publishes no such information; the reviewed image findings are shown next to those cells below. Jingjiu’s recorded 16/84 kN and 0.027 kg remain tied to its own publication. This page preserves both source-recording dates instead of presenting today’s review as a new product test.
The sealed designation remains in Jingjiu’s requiring-maintenance catalogue.
Jingjiu’s catalogue route [4] explicitly separates spherical plain bearings requiring maintenance from its maintenance-free range. The GE15ES/GE15ES-2RS pair belongs to the former. The 2RS name is therefore insufficient evidence for writing “maintenance-free”.
Both source tables put GE15ES and GE15ES-2RS in a shared row. Wuling’s series heading and Jingjiu’s section detail also show the ES-2RS variant [2–3]. These establish a published sealed designation, but the shared row does not make an ES quotation a sealed delivery. Require GE15ES-2RS in the complete offer and ask for the actual seal and sliding-contact specification.
Before committing to a housing, establish how the offered bearing is lubricated and maintained in the installed position. Send the actual oscillation path, loading, contamination and access arrangement, and request the selected lubricant, supply path and maintenance instruction. The examined catalogue rows do not provide a numerical relubrication interval or an approved lubricant for this installation; inserting a generic interval would not solve that access problem.
Jingjiu’s row includes an inventory tick. It is a website entry, without a dated stock quantity or lead-time commitment. Use the technical clarification and quotation together to confirm the sealed variant, current supply and delivered scope.
What each manufacturer published.
Manufacturer
Bore (mm)
Outside diameter (mm)
Inner-ring width B (mm)
Dynamic load rating (kN)
Static load rating (kN)
Reference mass (kg)
Source recorded
Wuling GE15ES-2RS Wuling pairs GE15ES and GE15ES-2RS in one image row. Its reviewed load columns lack a unit statement.
15
26
12
— Wuling’s reviewed image separately prints 17 without a stated load unit; no load value was entered in this historical record.
— Wuling’s image prints 85 without a stated load unit; do not borrow Jingjiu’s kN header.
— Wuling’s newer image row gives 0.025 kg; this historical record contains no mass entry.
A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings.
Compare the recorded figures.
Property
Finding
Sources
Bore
All 2 sources publish 15 mm
2
Outside diameter
All 2 sources publish 26 mm
2
Inner-ring width B
All 2 sources publish 12 mm
2
Where the figures differ, use the drawing from the manufacturer you buy from.
Jingjiu publishes linear-motion components, ball screws and spherical/rod-end bearings. Its spherical-bearing catalogue separates designs requiring maintenance from maintenance-free designs and labels the GE15ES/GE15ES-2RS row’s load ratings in kN. Choose the complete joint and mounting drawing, then confirm its sealing and lubrication requirements for the actual motion.
Published ranges: Lubricated and self-lubricating spherical plain bearings · Rod-end and angular-contact plain bearings · Linear ball bearings and guideways · Ball screws and supporting components
42 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08
Wuling publishes linear-motion parts and articulating joints. Its radial spherical-plain catalogue separates ring widths and lists seal variants by exact row; specify the joint’s required movement and the complete offered construction.
Published ranges: Linear ball bearings · Stud-type needle track rollers · Rod-end and spherical plain bearings · Linear guides and sliding units
52 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08
Explicit mm and kN headers; 15/26/12/9 mm dimensions, dk 22/d1 18 mm, minimum chamfers 0.3 mm, approximate angle 8°, dynamic/static 16/84 kN and approximate mass 0.027 kg.
GE15ES/GE15ES-2RS paired row: mm dimension group 15/26/12/9/d1 min 18, angle 8°, mass 0.025 kg. Dynamic/static 17/85 lack a stated unit and must not inherit Jingjiu’s header.
Lists the GE15ES-2RS range under requiring-maintenance bearings, with a separate maintenance-free catalogue route; the seal name does not establish maintenance-free operation.
Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.
We use cookies and analytics to operate this website and measure visits. Form contents and private workspace pages are excluded from analytics. Privacy & cookies