THE BEARINGINDEX DIRECTORY

GE16ES-2RS — 16 × 30 × 14 mm

BOUNDARY DIMENSIONSUNIT / mm

Boundary dimensions · schematic, not a product photograph or manufacturing drawing.

Spherical plain

GE16ES-2RS

GE16ES-2RS is a spherical plain designation documented on BearingIndex from 1 manufacturer publication. The published boundary dimensions are 16 × 30 × 14 mm. The publishing works are in Zhejiang province, China. Every value below comes from that manufacturer’s own published material, with the date it was recorded.

Bore d: 16 mm
Outside D: 30 mm
Width B: 14 mm

Compare the 1 publication

What each manufacturer published.

Manufacturer	Dynamic load rating (kN)	Static load rating (kN)	Reference mass (kg)	Source recorded
Jingjiu GE16ES-2RS	21	106	0.041	2026-09-24	Request

A dash means that manufacturer did not publish the value. Dimensions every source agrees on are shown above rather than repeated per row.

Calculated from the published values.

Figure	How it is obtained	Result
Radial section height	(D − d) / 2	7 mm
Mean diameter d_m	(D + d) / 2	23 mm
C / C₀ load ratio	dynamic ÷ static load rating	Jingjiu 0.2

Arithmetic on the figures above — not a bearing life calculation for your load case.

The works that publish GE16ES-2RS.

Jingjiu

Lishui, Zhejiang, China

Spherical plain bearings and linear motion

Zhejiang Jingjiu combines spherical plain and rod-end bearings with a linear-motion catalogue. Its selection pages distinguish lubricated and self-lubricating joint designs, alongside linear bushings, guideways and ball screws. This is a useful starting point for assemblies that need both guided travel and articulated connections.

Published ranges: Lubricated and self-lubricating spherical plain bearings · Rod-end and angular-contact plain bearings · Linear ball bearings and guideways · Ball screws and supporting components

42 designations documented here · 1 reviewed evidence record · source recorded 2026-09-24

Ask Jingjiu about GE16ES-2RS

Not documented by any source here.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Limiting speed — grease · Limiting speed — oil · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.

Ask the manufacturer for these when you enquire.

Other designations with the same 16x30x14 mm envelope.

Designation	Bearing family	Works
GE16ES	Spherical plain	1

Same envelope, but sealing, internal design, clearance and load capability differ — not interchangeable by default.

Neighbouring designations documented here.

Designation	Envelope d × D × B (mm)	Bearing family	Works
GE160ES	160 × 230 × 105	Spherical plain	1
GE160ES-2RS	160 × 230 × 105	Spherical plain	1
GE16ES	16 × 30 × 14	Spherical plain	1

Each envelope shown is that designation’s own published size.

Request a quote for GE16ES-2RS.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

Continue your search.

All spherical plain models →About this bearing type →How to read evidence →