GE35ES — 35 × 55 × 25 mm

What each manufacturer published.

A dash means that manufacturer did not publish the value. Dimensions every source agrees on are shown above rather than repeated per row.

Calculated from the published values.

Arithmetic on the figures above — not a bearing life calculation for your load case.

The works that publish GE35ES.

Jingjiu

Lishui, Zhejiang, China

Spherical plain bearings and linear motion

Zhejiang Jingjiu combines spherical plain and rod-end bearings with a linear-motion catalogue. Its selection pages distinguish lubricated and self-lubricating joint designs, alongside linear bushings, guideways and ball screws. This is a useful starting point for assemblies that need both guided travel and articulated connections.

Published ranges: Lubricated and self-lubricating spherical plain bearings · Rod-end and angular-contact plain bearings · Linear ball bearings and guideways · Ball screws and supporting components

42 designations documented here · 1 reviewed evidence record · source recorded 2026-09-24

Ask Jingjiu about GE35ES

Add to inquiry

Wuling

Lishui, Zhejiang, China

Linear and spherical plain bearing systems

Zhejiang Wuling manufactures linear bearings, stud-type track rollers, rod ends and radial spherical plain bearings in Lishui. Its wider motion range includes linear guides, shafts, sliding units and ball screws. The company lists applications in textile, printing, medical and machine-tool equipment, where motion stroke and mounting geometry guide selection.

Published ranges: Linear ball bearings · Stud-type needle track rollers · Rod-end and spherical plain bearings · Linear guides and sliding units

52 designations documented here · 1 reviewed evidence record · source recorded 2026-09-24

Ask Wuling about GE35ES

Add to inquiry

Applications the publishing works state.

Application areas each manufacturer states for its own range. Confirm load, speed, temperature and lubrication for your case.

Not documented by any source here.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Limiting speed — grease · Limiting speed — oil · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.

Ask the manufacturer for these when you enquire.

Other designations with the same 35x55x25 mm envelope.

Same envelope, but sealing, internal design, clearance and load capability differ — not interchangeable by default.

Neighbouring designations documented here.

Each envelope shown is that designation’s own published size.