Boundary dimensions · schematic, not a product photograph or manufacturing drawing.
Ball bearings
R188UZZ
R188UZZ is a ball bearings designation documented on BearingIndex from 1 manufacturer publication. The published boundary dimensions are 6.35 × 12.7 × 4.7625 mm. The publishing works are in Fujian province, China. Every value below comes from that manufacturer’s own published material, with the date it was recorded.
Should you accept R188VZZ or SR188UZZ instead of R188UZZ?
Runstar gives these three items the same nominal envelope, but its detail pages distinguish ring and ball materials. They also contain a weight conflict. Resolve the offered construction and that conflicting field before describing an alternate as equivalent.
Equal envelopes, different material statements.
R188UZZ [1], R188VZZ [2] and SR188UZZ [3] each list a 1/4-inch bore, 1/2-inch outside diameter and 3/16-inch width. Their detail tables describe shields, ten 1.588 mm balls and different component materials.
Construction field
R188UZZ / R188VZZ
SR188UZZ
Rings and balls
52100 (GCr15) chrome steel
440C (9cr18) stainless steel
Cage and shields
300-series stainless steel
304 stainless steel
The stainless cage and shields do not make R188UZZ's rings and balls stainless. Conversely, the SR188UZZ statement identifies a material change; it does not establish a corrosion test or a particular running result for your assembly.
The text fields do not provide complete dimensioned outer-contact profiles for the U and V constructions. Obtain the proposed profile drawing and compare it with the old part's function before accepting the V item. Do not infer groove depth, contact geometry or a performance advantage from its letter alone.
The same page publishes both 2.32 g and 1.6 g.
R188UZZ's top parameter block gives 2.32 g; the detail table below gives 1.6 g. The examined VZZ and SRUZZ pages show the same conflict. The range list [4] uses 2.32 g, which is the basis for the directory's existing 0.00232 kg record. None is a newly weighed sample.
Ask Runstar to resolve the intended mass against the selected construction and controlled drawing. If mass matters to the mechanism, use an agreed sample measurement as well. Until resolved, do not combine the lighter detail-table mass with the other published fields and call it a verified product specification.
The metric width displayed is 4.762 mm beside 3/16 inch. Exact conversion of 3/16 inch is 4.7625 mm; the directory's value reflects that conversion, not a stated tolerance or a precision measurement. Obtain the dimensional limits for the selected bearing when checking an axle-spacer stack.
The detail table offers options; the quote must select them.
The manufacturer tables state ABEC-1 with higher grades available, C0 clearance with alternatives available, and grease with oil available. Those options do not identify the configuration in an unspecified quotation. Ask for the actual grade, clearance and lubricant alongside the complete part number.
Do not confuse the C0 clearance label with the separately listed static-load rating Cor = 355 N. The dynamic-load field is Cr = 920 N. Neither rating establishes a spin time, sound result or lifetime in a yo-yo or another mechanism; the examined pages contain no such test.
The interchange matrix names several brands but leaves their corresponding cells empty. It provides no NMB, NTN, EZO or other alternate designation to order. Request a specific manufacturer's drawing for any proposed cross-brand substitute.
The detail tables also show ISO9001:2015, REACH and ROHS with a PASSED label. This guide has not verified certificates, test reports or order-level compliance from that text. If required by the purchase, obtain the applicable documents and scope for the actual supplier and item.
A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.
Calculated from the published values.
Figure
How it is obtained
Result
Radial section height
(D − d) / 2
3.18 mm
Mean diameter dm
(D + d) / 2
9.53 mm
Arithmetic on the figures above — not a bearing life calculation for your load case.
Runstar publishes miniature, flanged and thrust bearings, with separate dental and ceramic product routes. Its SF692 variants have different ring widths, and some published dimensional or mass entries require clarification. Use the complete designation and controlled drawing for the offered product; catalogue application labels do not establish medical approval or a verified ceramic composition.
Published ranges: Miniature deep groove ball bearings · Small deep groove ball bearings · Flat thrust ball bearings · Nonstandard miniature designs
223 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08
Application areas each manufacturer states for its own range. Confirm load, speed, temperature and lubrication for your case.
Fields absent from the recorded dataset.
Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Dynamic load rating · Static load rating · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Limiting speed — grease · Limiting speed — oil · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.
Ask the manufacturer for these when you enquire.
Other designations with the same 6.35x12.7x4.7625 mm envelope.
Actual envelope, materials, grade/clearance/lubrication options and load fields. Top/detail mass conflict retained. Compliance labels are manufacturer statements, not independent verification.
Actual R188UZZ range row including 2.32 g and inch/metric fields. Exact inch conversion distinguished from published rounded metric width.
Guide checked 2026-10-08. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.
We use cookies and analytics to operate this website and measure visits. Form contents and private workspace pages are excluded from analytics. Privacy & cookies