BearingIndex
THE BEARINGINDEX DIRECTORY

SR188 U — 6.35 × 12.7 × 4.7625 mm

BOUNDARY DIMENSIONSUNIT / mm

Runstar lists SR188 U as an open, single-row radial ball bearing: bore 1/4 inch (6.35 mm), outside diameter 1/2 inch (12.7 mm), width 3/16 inch. Its photographs show a concave outer profile, without a dimensioned groove or a confirmed delivered configuration.

Ball bearings

SR188 U

SR188 U is a ball bearings designation documented on BearingIndex from 1 manufacturer publication. The published boundary dimensions are 6.35 × 12.7 × 4.7625 mm. The publishing works are in Fujian province, China. Every value below comes from that manufacturer’s own published material, with the date it was recorded.

Bore d
6.35 mm
Outside D
12.7 mm
Width B
4.7625 mm

Compare the 1 publication

MODEL-SPECIFIC BUYER GUIDE · SOURCES CHECKED 2026-10-09

Keep the U profile, open construction and 3/16-inch width together in the enquiry.

Runstar’s exact SR188 U page calls the part SR188U in its technical table and identifies the closure as OPEN. Its yo-yo list also includes shielded SR188UZZ at the same nominal envelope and a narrower SR188 at 1/8-inch width. The SR188 U page itself disagrees on mass: 2.32 g in the header, 1.6 g in the detail table. These differences make the complete model and delivered construction more useful than the 188 number alone.

SR188 U, SR188UZZ and SR188 do not define the same purchase.

Runstar’s yo-yo category [1] keeps these names on separate rows. The exact SR188 U detail [2] removes the space in its Part Number field, writing SR188U, while explicitly specifying OPEN.

Runstar namePublished dimensionsConstruction / distinction
SR188 U / SR188U1/4-inch bore; 1/2-inch outside; 3/16-inch width.Exact detail says OPEN.
SR188UZZSame listed 1/4 × 1/2 × 3/16-inch envelope.Its exact detail [3] says Shields; the closure changes.
SR1881/4-inch bore; 1/2-inch outside; 1/8-inch width.Category row is narrower; do not drop U from the enquiry.

The nominal width difference between 3/16 and 1/8 inch is 1/16 inch, or 1.5875 mm. A retained axle or seat selected for SR188 U needs its actual ring-face locations checked; the shared 6.35 mm bore and 12.7 mm outside diameter do not settle that axial fit. The category’s SR188 row is not a substitute recommendation.

The source prints 3/16 inch alongside 4.762 mm. Exact conversion gives 4.7625 mm, which this directory retains. That 0.0005 mm difference is a difference in displayed numeric precision, not a verified width error, a measurement or a machining tolerance. Use the selected part’s controlled drawing to specify acceptance limits.

Mass evidence for SR188 UPublished valueUse in receiving
Category and exact-page header2.32 gMatches the directory’s historical 0.00232 kg entry.
Exact-page detail table1.6 gConflicts with the header; the page supplies no reconciliation.

Do not choose one weight simply because it appears in a longer table, or reject received bearings against an unresolved catalogue number. Ask Runstar to confirm the selected assembly and its mass reference. The shielded SR188UZZ detail also shows 2.32 g above and 1.6 g in its table [3], so changing to that name does not resolve the conflict.

The open label and gallery need a configuration confirmation before string-contact decisions.

The SR188 U detail [2] describes single-row BALL construction with radial load direction and OPEN closure. Its main photograph shows exposed balls and a concave outer profile, while other linked gallery photographs show covered faces. None is a dimensioned groove drawing or proof of the actual shipment.

Exact technical entry [2]Published informationBuyer decision
Ring / ball materials440 C (9cr18) stainless steel for both.The listed ball material is steel, not evidence of ceramic balls.
Cage / shield material entries304 stainless steel in both fields.The shield-material field does not override OPEN or prove shields are supplied.
Ball size / quantity1.588 mm / 10.Internal rolling-element information, not the external U-groove radius.
LubricationGrease; oil available.Select the delivered lubrication state; an open face does not mean dry.

For a string running on the outer profile, send the actual string/contact requirement and yo-yo assembly drawing. Request the offered groove’s radius, depth, profile tolerances and relation to the bearing faces. The U name and photograph identify a profile question, but give no numerical answer for machining or string clearance. Do not use the 1.588 mm ball size to fill that gap.

For the desired spin and return behaviour, agree the actual bearing, lubricant and installed test together. The page provides no measured spin time, return-response classification or starting-torque result. ABEC-1 with higher grades offered, and C0 with other clearances offered, describe selection options; they do not independently establish the behaviour of this bearing in your yo-yo.

Runstar separately lists dynamic 920 N and static 355 N for the radial bearing, and a temperature range of −30 to 130°C [2]. These entries do not establish string-contact capacity, a speed limit or a completed yo-yo performance trial. Confirm the actual closure and lubrication first, then request the appropriate installed acceptance criteria. Its interchange table leaves the other-brand cells blank, so it supplies no named cross-brand equivalent for this U construction.

What each manufacturer published.

ManufacturerBore (mm)Outside diameter (mm)Width (mm)Reference mass (kg)Source recorded
Runstar
SR188 U
Runstar identifies SR188 U / SR188U as OPEN. The source prints width 3/16 inch and 4.762 mm; the directory retains the exact nominal inch conversion 4.7625 mm, not a measured tolerance.
6.3512.74.76250.00232
Recorded 0.00232 kg corresponds to the category/header 2.32 g; the exact detail table separately prints 1.6 g. Confirm the delivered build’s mass.
2026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings.

The works that publish SR188 U.

Runstar

Zhangzhou, Fujian, China

Miniature ball and thrust bearings

Runstar publishes miniature, flanged and thrust bearings, with separate dental and ceramic product routes. Its SF692 variants have different ring widths, and some published dimensional or mass entries require clarification. Use the complete designation and controlled drawing for the offered product; catalogue application labels do not establish medical approval or a verified ceramic composition.

Published ranges: Miniature deep groove ball bearings · Small deep groove ball bearings · Flat thrust ball bearings · Nonstandard miniature designs

223 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Runstar about SR188 U

Applications the publishing works state.

ApplicationStated by
Fishing tackleRunstar
Medical equipmentRunstar
Precision instrumentsRunstar
Small motorsRunstar

Application areas each manufacturer states for its own range. Confirm load, speed, temperature and lubrication for your case.

Request a quote for SR188 U.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Runstar · SR188 U source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

Sources used for the individual buyer guide

  1. Runstar · yo-yo catalogue with SR188 U and separate neighbouring variants ↗

    Distinct SR188 U, SR188UZZ and SR188 rows. U/UZZ width 3/16 inch with 2.32 g category mass; SR188 width 1/8 inch. The common diameters do not establish substitution.

  2. Runstar · exact SR188 U / SR188U technical publication ↗

    OPEN single-row radial bearing, explicit inch/mm dimensions, 440 C rings/balls, 304 cage and shield-material fields, ball size 1.588 mm/count 10, grease with oil offered. Header 2.32 g conflicts with detail 1.6 g; photographs do not provide a dimensioned groove.

  3. Runstar · exact SR188UZZ shielded publication ↗

    Same nominal envelope but Shields closure. Header 2.32 g and detail 1.6 g also conflict; changing the closure name does not settle mass or approve interchangeability.

Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.