BearingIndex
THE BEARINGINDEX DIRECTORY

ASBL

ASBL and NMOS are the company’s published brands. Evaluate the actual automotive or motor component, its producing base and an agreed test plan before treating an application category as a qualified replacement.

ASBL / NMOS · COMPONENT APPROVAL

Choose the component role, then ask for its approval evidence.

Ningbo Asian Bearing describes miniature and small precision deep-groove bearings with 3–50 mm bores and nonstandard custom supply under ASBL and NMOS. Its product routes include automotive alternators, starting motors, engine rocker arms and needle bearings. The published deep-groove range does not define every one of those different assemblies. Actual company scope [1] Alternator entry [2] Rocker-arm entry [3]

Prepare a sourcing inquiry
01

Four catalogue routes need different RFQ inputs.

The reviewed detail entries are dated 8 May 2024 and identify product roles. Their text does not provide a complete dimensional/load/speed table, OEM part-number cross-reference or controlled variant drawing. An original alternator image shows bearings, not a numerical specification. Use these routes to direct the conversation, then obtain part-specific evidence. Alternator [2] Rocker arm [3] Starting motor [4] Needle bearing [5]

Published routeIdentify firstQualification to agree
Alternator bearingExact alternator assembly, bearing position and controlled bearing/seat drawing; offered shields/seals, grease and clearance.Actual speed/load and thermal duty, contamination exposure, noise and installed functional acceptance.
Starting-motor bearingStarter variant and component position, envelope and mating interfaces, assembly and lubrication build.Start-cycle and environment tests for that assembly; do not transfer alternator continuous-running evidence automatically.
Engine rocker-arm routeWhether the offer is a complete roller/bearing unit or a component; engine/rocker revision and shaft/contact interfaces.Material and surface requirements, lubrication and motion/load cycle, dimensional and installed endurance acceptance.
Needle-bearing routeActual type, rings/cage/rollers and interfaces included; drawing, raceway requirements and assembly method.Controlled dimensions, material/hardness and running-duty tests. Do not assume the company’s 3–50 mm deep-groove statement is a needle catalogue range.

These are procurement questions, not extra capabilities or ratings attributed to ASBL. For any claimed equivalent, require a drawing comparison and approved sample test against the buyer’s actual assembly.

02

Turn the described Yuyao test centre into an order-specific plan.

The quality page places the detection centre in the Yuyao production base, with measuring, inspection and laboratory rooms. It lists dimensional and surface instruments, metallography and hardness equipment, vibration acceleration/velocity measurement, radial-clearance measurement and fatigue-life equipment. The separate technical gallery names fatigue-life and dust/water tests, length measurement, a projector, a Taylor instrument and steel chemistry analysis. This is manufacturer-reported equipment and testing scope; it is not an accredited scope or a passing report for your part. Detailed test-centre description [6] Actual technical gallery [7]

Dimensions, surface and material

Request a report linked to drawing revision and bearing lot, including required seat dimensions, surface/geometry and material/hardness characteristics. Agree the method, sampling, instrument calibration and measurement uncertainty where relevant.

Noise and vibration

State acceleration or velocity measurement, speed, bands and numerical limits. Keep the bearing bench result separate from the assembled motor or automotive unit’s sound and vibration acceptance.

Sealing and endurance

Agree dust/water exposure, operating load/speed, temperature, lubricant and duration, then define pass/fail criteria. Equipment named “fatigue life” does not establish a universal service-life guarantee or environmental rating.

Confirm who performs the tests, whether the proposed method is available at the quoted site and whether an external accredited laboratory is required. Ask for an actual sample report and repeat-lot release plan before accepting a broad statement of standards-based testing.

03

The producing base and test base both belong in the approval.

The company description states Ningbo and Yuyao industrial bases. Its quality description says manufacturing quality is managed through each subsidiary’s own departments and management system. The production gallery labels assembly, centreless grinding, heat treatment and grinding workshops, without identifying a complete order-specific process/site allocation. Two-base company statement [1] Subsidiary quality organisation [6] Workshop publication [8]

Before sampling

Record the contracting entity, actual producing address, processes performed there and any outsourced ring/roller, heat-treatment or other operations. Identify which base issues the sample and which laboratory signs the test report.

Do not infer that every gallery operation applies in-house to every product, or that the Ningbo contact address is the approved factory for the offered model. Confirm current production feasibility, quantities and delivery directly.

04

Verify the required credential against the exact entity and site.

The original Ningbo 2024 first-batch technology-based SME list includes 宁波艾森博林轴承有限公司 at entry 2,327, number 2024330211A0002327. This dated government record corroborates the listed company; it does not approve its automotive products or laboratory results. Original government PDF, page 94 [9]

The manufacturer’s honours page displayed “temporarily no content” in this review. A current quality-system certificate, covered manufacturing site and issuer status were not established there. Obtain any required current certificate and annex, then check the exact entity, activities and validity with its issuer. An empty public page does not itself establish whether the company holds a credential. Actual honours page [10]

The company description names customers and broad application sectors. Those are supplier statements, not independent evidence of a current relationship, customer endorsement or an approved part for your vehicle, medical or other controlled application. Require the buyer’s actual technical and regulatory qualification rather than relying on a familiar customer name. Published customer and application claims [1]

05

Send a component-specific brief through the published contact.

The dedicated contact page names Mr Pan, mobile 13685811991 and [email protected]. The website telephone is 0574-86681398. The address is Building 4, 168 Tonghe East Road, Luotuo, Zhenhai, Ningbo, with the Tianhu Road east entrance noted. Confirm authorisation and obtain the engineering contact responsible for the offered component, producing site and report approval. Actual contact document [11]

The quality page states a domestic onsite response within 24 hours and an international reply within one working day. Treat these as published service statements, not a contractual response or resolution commitment for a particular region/order. Agree escalation, containment, report timing and replacement responsibilities in the actual supply agreement. Published service wording [6]

For custom parts, establish design responsibility, drawing ownership, tooling/sample costs, quantity/MOQ and sample timing. Approve samples against the agreed drawing and duty before reserving production; no price, stock, capacity or lead-time promise is established by this profile.

YOUR NEXT STEP

Prepare an ASBL component and test-plan brief

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Manufacturer company publication, browser readASBL · company, brands and product focus ↗

    ASBL/NMOS, 3–50 mm deep-groove focus, custom supply and two-base statement. Customer/application claims are not independent approval.

  2. Actual manufacturer detail and original image checkedASBL · automotive alternator bearing ↗

    8 May 2024 product-role entry; image is not a dimensional/load table or controlled OEM cross-reference.

  3. Manufacturer product-role entryASBL · engine rocker-arm bearing ↗

    Rocker-arm route; exact unit/component build, engine fitment and acceptance remain to confirm.

  4. Manufacturer product-role entryASBL · starting-motor bearing ↗

    Starting-motor category; no complete part drawing, stock or operating-duty guarantee inferred.

  5. Manufacturer product-role entryASBL · needle bearings ↗

    Needle-bearing route; deep-groove bore range is not transferred to this category.

  6. Manufacturer technical and quality descriptionASBL · quality management and Yuyao test centre ↗

    Subsidiary management, listed test equipment and service wording; methods, accreditation and order-specific results require confirmation.

  7. Manufacturer instrument and test captionsASBL · actual technical-centre gallery ↗

    Fatigue, dust/water, dimensional and chemistry captions; no numerical capability, accredited scope or performance rating inferred.

  8. Manufacturer workshop captionsASBL · production-base gallery ↗

    Assembly, centreless grinding, heat treatment and grinding labels; offered-part process/site allocation not established.

  9. Primary government original PDF readNingbo · 2024 first-batch technology-based SME list ↗

    Page 94, entry 2,327 and 2024330211A0002327; dated company listing, not automotive or laboratory certification.

  10. Manufacturer publication with no content displayedASBL · honours page reviewed ↗

    Current certificate fields and issuer status not established; this does not prove absence of credentials.

  11. Manufacturer contact documentASBL · dedicated contact ↗

    Mr Pan, mobile, email and Tonghe East Road address; confirm authorisation, actual manufacturing site and order terms.

Report a source correction → · Return to inquiry checklist ↑

ASBL published product scope reviewed

The manufacturer website describes miniature precision deep groove ball bearings.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:34

Source documentation retained for editorial review.