BearingIndex
THE BEARINGINDEX DIRECTORY

BAJE

Hebei BAJE describes manufacture and sales of deep-groove, insert, tapered-roller and automotive wheel-hub bearings, with turning, thermal-processing and roller workshops. Its much broader website menu should not be treated as proof of every in-house product. Two actual model pages contain conflicting dimensions and large-bearing values; obtain corrected, revision-controlled drawings and application data before ordering.

INDUSTRIAL AND HUB BEARINGS · RESOLVE THE MODEL DATA FIRST

Request a corrected drawing before using BAJE’s online model parameters.

Hebei Baje Bearing Manufacturing Co., Ltd. (河北巴捷轴承制造有限公司) presents BAJE as both a manufacturer and supplier, naming deep-groove ball, insert, tapered-roller and wheel-hub bearings as its main products. The company describes turning, thermal-processing and roller workshops and a technical-service offer. Its website also has many additional bearing categories and industry articles; qualify the actual quoted production route and model rather than treating every navigation item as a demonstrated manufacturing capability. Dedicated company description [1]

Prepare a sourcing inquiry
01

The actual model pages need correction before they can support selection.

The issue is visible in individual product pages, not merely a missing catalogue. The following are examples of conflicting publication, not accepted specifications. Ask BAJE to issue a corrected candidate drawing/data sheet and confirm its revision in the quotation. Do not choose whichever number seems plausible. Actual 22205CAW33 page [2] Actual 30206 page [3]

Published candidateConflict foundResolve with the manufacturer
22205CAW33Header and d/D/B table say 25/52/18 mm, but the series is labelled d 630–900 mm; other rows include D1 ≈ 784.5 mm, installation diameter 653 mm and mass ≈ 283 kg.Confirm full designation and suffix, approved envelope/datum drawing, mounting dimensions and corrected mass/load/speed rows. The inconsistent page cannot validate those values.
30206Header says bore 30, outside diameter 62 and thickness 17.5 mm, while its table lists B 86, C 71 and T 91 mm and a d 170–360 mm series heading.Obtain the candidate cone/cup and complete-assembly drawing, ring widths and total width, mounting shoulders/chamfers and matched-component supply scope.

The 22205 description also contains garbled angular-limit/suffix text. Do not convert that wording into an allowable misalignment, clearance or lubrication requirement. State the actual duty and request a coherent engineering recommendation. The load/speed numbers on these pages were not adopted as usable ratings. Product text and table [2]

02

An industrial replacement and a hub assembly require different identification.

Industrial bearing or insert unit

Send the complete existing designation, drawing and bearing arrangement. For tapered rollers, identify matched cone/cup, positioning, setting and axial load directions. For spherical candidates, confirm bore form, cage, lubrication features and installed clearance. For an insert unit, specify locking method, housing pattern and shaft interfaces rather than just bearing bore.

Automotive wheel-hub requirement

Provide vehicle/axle position, OEM reference and controlled interface drawing; identify flange, bolt pattern, seal and ABS encoder/sensor requirements where applicable. Request the exact candidate, agreed validation and supply responsibility. A generic wheel-hub article is not a vehicle fitment list or OEM approval.

The company’s automotive application page is dated 27 January 2021 and describes several hub-unit generations and general maintenance. It does not establish a BAJE vehicle-reference list, test report or homologation. Use the vehicle manufacturer’s applicable installation/service instructions and candidate evidence; its general mileage/installation suggestions are not universal service intervals. Actual automotive article and date [4]

The homepage carries aircraft, fast-train and wind-power application links, while the dedicated company introduction names a narrower main-product range. None of those broad application headings establishes aerospace, rail or wind approval for the offered lot. Ask which products are made at the quoted site, which are sourced and who controls traceability and complaints. Homepage category/application scope [5] Core product and workshop claims [1]

03

Qualify the process behind the corrected part.

BAJE states that it has turning, thermal-processing and roller workshops, with modifications to surface, centreless, raceway and internal grinding, superfinishing and washing equipment. Its company page offers selection, performance testing, mechanical/application analysis, custom design/production, optimisation and repair services. These statements describe an offer; they do not establish the quoted model’s process capability, calibrated test results or current available capacity. Actual workshops and service scope [1]

  1. Correct and freeze the design. Agree steel grade/standard, thermal condition, dimensions and tolerances, cage/closure and lubrication, precision and clearance with current standard editions.
  2. Trace the representative lot. Request material/heat identity, thermal-treatment and ring/roller inspection records, dimensional/rotational acceptance and agreed noise or torque tests where the assembly requires them.
  3. Approve installed behaviour. Define representative loads, speeds, fits, temperature and duty, with measured criteria and a documented trial. Separate catalogue load ratings from the actual arrangement’s suitability.
  4. Control repeat supply. Agree lot identification, preservation/packing, drawing and process changes, outsourced steps, nonconformance handling and replacement responsibility.
Questions for a supplier-proposed substitute

Ask for a side-by-side controlled drawing, suffix/configuration explanation and application review. Require clear differences in dimensions, cage, clearance, seals and grease. Nominal designation similarity and a photograph are insufficient for approval; obtain the buyer’s engineering acceptance before changing the part.

04

Separate system certification from the historical credit awards.

The homepage states that BAJE follows ISO 9001, ISO/TS 16949 and ISO 14001 systems. This wording does not supply a current certificate, issuer status, legal entity or manufacturing scope. IATF’s own explanation says IATF 16949:2016 replaced ISO/TS 16949:2009. Request the current applicable system certificate and site scope required by the order rather than accepting a legacy standards phrase as current automotive certification. Actual homepage wording [5] IATF’s primary explanation [8]

The company’s 14 July 2021 article describes seven credit/honour certificates. One original “重合同守信用企业” image was visually read: it shows 23 June 2021 to 22 June 2024, a private credit-service issuer and a note restricting its use to the enterprise’s credit status during the stated validity. It does not establish present credit status, bearing performance or a government-issued manufacturing approval. No current renewal or independent issuer-status confirmation was obtained. Historical article and original image [6]

The dedicated contact names Manager Xu, telephone 0319-8561987, mobile 13463924333, email [email protected] and the location Chenlin Village, Linxi Town, Linxi County, Xingtai, Hebei; 600 metres south of the county elderly-care home, northeast of the village. Confirm the exact receiving site, contracting name, engineering owner and corrected model documents before sending samples or issuing an order. Dedicated company contact [7]

YOUR NEXT STEP

Prepare a BAJE corrected-model and sample brief

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Official dedicated company publicationBAJE · company introduction ↗

    Main products, claimed workshops and technical services; not audited model capability.

  2. Official HTML and browser-rendered parameters readBAJE · actual 22205CAW33 product page ↗

    Conflicting small envelope and large-series rows; values not accepted as order ratings.

  3. Official actual product publicationBAJE · actual 30206 product page ↗

    Conflicting header and B/C/T/series rows; corrected drawing required.

  4. Official article dated 27 January 2021BAJE · automotive application article ↗

    Generic hub construction/maintenance discussion; not fitment or OEM qualification.

  5. Official category, application and quality-system statementsBAJE · main website ↗

    Broad navigation and legacy ISO/TS wording; no present certification inferred.

  6. Official historical article; one original contract-credit image visually readBAJE · 2021 credit-honour article and original images ↗

    Past-date private credit image, not current credit, product or government manufacturing approval.

  7. Official company contact publicationBAJE · dedicated contacts ↗

    Manager Xu, telephone/mobile/email and published location; sample route not tested.

  8. Primary standard-owner explanationIATF · origin and replacement of ISO/TS 16949 ↗

    IATF 16949:2016 replaces ISO/TS 16949:2009; provides no BAJE certification status.

Report a source correction → · Return to inquiry checklist ↑

BAJE published product scope reviewed

The manufacturer website describes ball, tapered roller and wheel bearings.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:33

Source documentation retained for editorial review.