BearingIndex
THE BEARINGINDEX DIRECTORY

Baorui

Zhenjiang Baorui presents two supply routes: chromium-steel motor bearings and stainless-steel bearings, with deep-groove, angular-contact, thin-section and guide-roller families. The official category pages link detailed PDFs, but the tested catalogue downloads were unavailable. Start with the actual motor, corrosion exposure or guide-track requirement, then request a controlled material/construction drawing, order-specific ratings and measurable inspection criteria.

MOTOR AND STAINLESS BEARINGS · SPECIFY THE OPERATING REQUIREMENT

Motor noise and corrosion exposure need different bearing specifications.

Zhenjiang Baorui Bearing Co., Ltd. (镇江宝瑞轴承有限公司) describes a business founded in 2008 in Xifang Village, Xinfeng Town, Dantu District, Zhenjiang. Its official introduction divides the product offer into chromium-steel motor bearings and stainless-steel bearings, while its category pages separate deep-groove, angular-contact, thin-section and roller constructions. Choose the engineering route from the actual working duty, then qualify a named candidate. Actual company and product introduction [1] Actual chromium-steel category [2] Actual stainless category [3]

Prepare a sourcing inquiry
01

Specify the installed motor bearing before asking for a vibration grade.

The introduction lists several deep-groove size families, sealed/shielded variants and labels such as P6, ZV2 and ZV3. The steel category separately links deep-groove, single/double-row angular-contact, LR and thin-section publications. These describe the advertised offer; they do not establish that every size, suffix or delivered batch meets the same precision, vibration or speed requirement. Actual advertised ranges and labels [1] Actual separate steel-family publications [2]

Give the installed conditions

Supply the motor’s shaft/housing drawings, fits, locating arrangement, radial/axial loads, speed duty, temperature and lubrication conditions. Explain the intended installed clearance and whether the bearing is sealed, shielded or externally lubricated. Confirm the exact full designation, grease and supplied construction.

If the motor has an electrical-insulation or shaft-current requirement, state it explicitly and request a qualifying construction/test document. A generic “motor bearing” label does not establish electrical insulation.

Make precision and noise measurable

Ask which dimensional/geometric checks and vibration measurement standard, bands, conditions and limits apply to the quoted candidate. Request representative sample and lot records rather than treating a webpage grade label as a test report.

Then validate the assembled motor under agreed conditions. Bearing-only vibration results cannot by themselves isolate motor imbalance, mounting, electromagnetic or other assembly noise sources.

No approved model-specific load, speed, noise, grease life or present MOQ was obtained. The tested original deep-groove PDF did not open successfully, so its numerical contents are not used here.

02

“Stainless” must become an alloy and an exposure requirement.

The stainless category advertises deep-groove, angular-contact, thrust, guide-roller, tapered-roller, self-aligning and insert-bearing routes. It does not establish a single alloy, grease, seal, corrosion-test condition or food-contact qualification covering all of them. The tested stainless deep-groove PDF was unavailable. Actual stainless family list and linked catalogue route [3]

Your concernInclude in the briefAsk for the exact candidate
Water, washdown or chemicalsFluid/cleaning chemistry, concentration, temperature, duration, drainage and exposure frequency.Ring/rolling-element/cage materials, seal and lubricant compatibility, protection measures and relevant agreed validation.
Corrosion-sensitive mechanical dutyLoad/speed, required fits and clearance, environment and expected maintenance.Material/heat-treatment evidence, current ratings and inspection criteria for the actual construction.
Food or hygiene-sensitive equipmentActual equipment/compliance requirement, possible contact pathway and cleaning regime.The applicable lubricant/material documentation and supplied-component scope; no food-safe claim inferred from stainless steel alone.

Do not assume the stainless version has the steel version’s ratings, construction or lifetime merely because the bore and outside diameter match. Ask which properties and installation requirements change, and agree a representative sample trial under your actual exposure conditions.

03

The same product page contains three different installation problems.

  • Angular-contact supply: the introduction/category lists single and double-row routes. Give axial-load directions, support arrangement and speed duty; request contact geometry, any required paired/matched arrangement and setting in a controlled assembly drawing. A size range does not establish a matched set or preload.
  • Thin-section supply: the steel category lists a separate thin-section publication. Provide the available radial/axial space and housing/shaft stiffness information, then ask for the candidate’s permissible loads, fits and assembly requirements. “Thin” does not approve a robot joint or another precision application.
  • LR/LFR or guide-roller supply: specify the working track/rail profile and material, contact load, alignment, mounting and side-contact conditions. Confirm the wheel contour and complete interface; similar bore sizes do not prove track compatibility.

These questions follow the manufacturer’s actual category distinctions and are buyer-defined qualification steps. The tested LR and double-row angular-contact PDFs failed to open, so no detailed profile, contact angle or rated capacity is inferred from them. Ask for the current originals with drawing revisions directly. Actual LR/LFR and angular-contact scope [1] Separate steel publications and download boundaries [2] Separate stainless guide-roller route [3]

04

Link the advertised production and inspection stages to your drawing.

The company introduction describes turning, heat treatment, grinding and assembly lines. The workshop page names CNC turning/grinding, quenching, superfinishing, assembly, marking, vibration instruments and automatic-clearance equipment. These are manufacturer-published process/equipment descriptions, not a witnessed factory audit or calibrated results for your order. Actual process self-description [1] Actual workshop captions [4]

  1. Approve construction and material. Identify ring/rolling-element/cage material, seal/shield, grease, fits/clearance and every suffix on the controlled drawing. Resolve the website’s abbreviated material wording through an original material specification.
  2. Agree the process and test plan. Ask which turning, heat-treatment, grinding and assembly stages apply, where they occur and which checks release the part. Define material, hardness, dimensions, clearance and any vibration/corrosion tests required by the actual duty.
  3. Accept representative samples. Link results and lot identification to the agreed drawing and installation conditions, then run the relevant motor, washdown or track-contact trial.
  4. Control repeat deliveries. Agree inspection scope, traceability, grease/material/process-change approval, nonconformance handling and committed delivery milestones. Published production-line counts do not establish spare capacity for your schedule.
05

Resolve the document and contact gaps before a purchase order.

The official introduction claims a quality-system certification, and the honours page labels Chinese/English certificate images. The tested Chinese original image returned 404 in the browser; no readable present certificate number, scope or validity was established. Obtain the current original and issuer-status evidence covering the seller and manufacturing site. A failed website image does not establish that the company has no certificate. Actual honours labels and unavailable original image [5]

An actual CNR-hosted report dated 15 December2020, credited to China Jiangsu Net, names the company in Xinfeng Town’s local business-support context. This independently supplies historical identity/local context, not a technical audit, present financial assessment or bearing-quality approval. Recent promotional recommendations and unverified high-speed/robotics claims were not used as qualification evidence. Actual dated authoritative-media report [6]

The dedicated contact page gives Xifang Village, Xinfeng Town, Dantu District, Zhenjiang, [email protected], +86 511 85901285 and +86 13951283341. The common footer instead shows 89988289; confirm the intended current contact through the dedicated route before ordering. Request exact legal seller, production/sample addresses, current original technical documents and order-specific sample/lead-time terms. No enquiry was sent. Actual dedicated contact and conflicting footer [7]

YOUR NEXT STEP

Prepare a Baorui motor, stainless or roller enquiry

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Actual manufacturer self-descriptionBaorui · official introduction ↗

    2008 history, two material routes and advertised precision/series/process scope; counts and certifications not independently audited.

  2. Actual official product indexBaorui · chromium-steel category ↗

    Five family PDF links; tested deep-groove/double-row/LR downloads failed502 and browser PDF request failed, no numerical PDF contents used.

  3. Actual official product indexBaorui · stainless category ↗

    Seven separate stainless families; tested deep-groove PDF unavailable, alloy/corrosion/hygiene approval not established.

  4. Actual official captions readBaorui · workshop publication ↗

    Published processing/inspection equipment stages only; no independent process audit or test results asserted.

  5. Actual official labels and browser-tested imageBaorui · honours publication ↗

    Certificate labels present, Chinese /up_files/g1.jpg actual404; current original/issuer status remains a verification gap.

  6. Actual dated authoritative-media publication, GB18030 readCNR · Xinfeng local-business report, 15 December2020 ↗

    Company identity and locality in credited China Jiangsu Net report; no present capacity, credit or product quality inferred.

  7. Actual official contactBaorui · dedicated contact ↗

    Xifang Village, email, dedicated phone/mobile and different footer number; current contact/entity/site needs direct confirmation.

Report a source correction → · Return to inquiry checklist ↑

Baorui published product scope reviewed

The manufacturer website describes motor bearings and stainless steel designs.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:33

Source documentation retained for editorial review.