BearingIndex
THE BEARINGINDEX DIRECTORY

BRTEC

BRTEC publishes first-, second- and third-generation wheel bearings and hub assemblies from Yuhuan. Its catalogue distinguishes vehicle application, axle position, ABS and kit inclusion. Start with a VIN and OE reference, approve the exact interfaces and delivery contents, then choose the factory or confirmed regional fulfilment route.

BRTEC · WHEEL BEARING AND HUB ASSEMBLY SOURCING

Match the vehicle, the axle and the contents of the box.

BRTEC Wheel Hub Bearing Co., Ltd. (Taizhou) / 台州创豪轮毂轴承有限公司 says it has produced and sold wheel hub assemblies since 2010, with first-, second- and third-generation products. Its published catalogue goes beyond a vehicle-brand list: individual entries distinguish axle position, ABS and kit status. Those fields should become an approved order specification. Official company description [1]

Prepare a sourcing inquiry
01

Company facts

Checked on 30 October 2026 against BRTEC’s Chinese, English and Spanish pages, its certificate images and the Yuhuan government notice.

ItemDetailSource
Chinese legal name台州创豪轮毂轴承有限公司Company page [1]
English nameBRTEC Wheel Hub Bearing Co., Ltd. (Taizhou); certificates also use “Brtec Wheel Hub Bearing Co., Ltd.” and “Taizhou Chuanghao Hub Bearing Co., Ltd.”[1], [7]–[9]
BrandBRTEC[1]
ListingNot listed; no filings found on CNInfoCNInfo search
Since2010, as stated by the company; registration date not checked[1]
FactoryBuildings 1–2, No. 221 Lubei Avenue, Yuhuan Economic Development Zone, Zhejiang; over 40,000 m². The English site also mentions a factory in Vietnam without naming it.Contact page [6], [1]
US addressesOntario, California, and a warehouse in Norcross, Georgia; no US company name is published[6]
CatalogueFirst-, second- and third-generation hub bearings and assemblies; more than 3,600 varieties[1]
CertificatesIATF 16949, ISO 14001 and ISO 45001 images, all past their expiry dates on 30 October 2026[7]–[9]
Government recordYuhuan Science and Technology Bureau notice 玉科〔2020〕32号, 15 December 2020, recognising the company’s R&D centre[5]
02

Use the actual catalogue entry, then resolve the gaps before ordering.

The following are supplier-published examples, not independent vehicle-fitment approvals. Preserve the BRTEC number and every application field when requesting a quote. A dash in the ABS field is unresolved information; it is not approval to omit a sensor or encoder.

Published referenceActual catalogue wordingOrder decision
991079BMW X5 2020–2023 / X6 2020–2021; Front; w/o Kits; ABS “–”; OE 31206864570.Confirm VIN/market variant, axle interfaces, ABS configuration and separately required hardware. Actual detail [2]
991331AK2Dodge Journey 2.4L–3.6L 2010–2012; Front; w/ Kits; W/ABS.Obtain the itemised kit list and approved sensor/connector or encoder specification. “Kit” alone does not state the number or type of fasteners. Actual detail [3]
991078ARAV4 V (A5_, H5_) 2.5 hybrid AWD 2020–; Front; w/o Kits; W/ABS; OE 42410-42070.Have engineering confirm the catalogue’s axle label and OE reference against the VIN and actual drawing before accepting the application. Actual detail [4]

Send the VIN or validated vehicle configuration, model year, market, drivetrain, side/axle and original part number together. Include photographs of the removed unit, connectors and markings where useful. Ask BRTEC to confirm the exact supersession/cross-reference and installation position in writing. Similar product photographs or an OE number copied into a catalogue are insufficient to resolve a mismatch.

03

Approve a complete wheel-end specification and receiving checklist.

Mechanical interfaces

Request a controlled drawing with mounting pilot, flange/bolt pattern, stud or threaded-hole form, spline, offsets, retaining features and mating fits. Define which seals, nuts, bolts, clips and other installation parts are included. The reviewed catalogue text does not provide a full dimensional drawing for these examples.

Electrical and installation interfaces

Confirm whether the unit contains an encoder, integrated sensor or separate sensor arrangement; specify connector, lead routing and required signal/compatibility checks. Obtain the exact assembly’s installation procedure, tightening requirements and handling precautions from the responsible engineering source.

  1. Approve the sample configuration. Freeze drawing, kit bill of materials, application confirmation and packaging/part markings before sample dispatch.
  2. Validate on the intended installation. Agree dimensional, rotational/runout, ABS signal and representative-duty acceptance with the buyer’s engineering team. Request relevant test methods and results.
  3. Receive against the approved specification. Check lot/part identity, included hardware, connector/encoder configuration and agreed inspection records. Require approval of changes to materials, processes, subcomponents or fitment data.

The common product description discusses sealed and pre-greased wheel units generally. It is not a model-specific maintenance or lifetime guarantee. Agree corrosion, sealing, endurance and warranty evidence for the selected configuration rather than treating the generic description as a test report. Published product description and fields [2] Kit example [3]

04

Separate catalogue breadth, development recognition and automotive approval.

The company describes more than 3,600 varieties on its current Chinese and Spanish pages (an earlier version said 2,800), monthly new development, a Yuhuan factory over 40,000 m² and lathe, grinding, automatic grinding and heat-treatment equipment. These are supplier descriptions. They do not state which line makes an offered part, its current stock, committed lead time or the buyer’s approved process. Ask for the selected part’s process route, manufacturing site, inspection plan and capacity commitment. Actual company and equipment descriptions [1]

Yuhuan Science and Technology Bureau’s notice dated 15 December 2020 recognises enterprise research and development centres. Attachment entry 25 names the Taizhou Chuanghao wheel hub bearing technology R&D centre and 台州创豪轮毂轴承有限公司. This dated government record corroborates that development-centre recognition; it is not automotive product approval or a current quality-system certificate. Government notice, actual scanned pages reviewed [5]

The official company page claims IATF 16949:2016 and links three certificate images. All three show expiry dates that had passed by 30 October 2026, and no renewed certificate is shown: IATF 16949:2016 [7] from Quality Austria, registration T-14237/0, scope “Manufacturing of Wheel Hub Bearing”, without product design, expiry 21 February 2026; ISO 14001:2015 [8], 626023E10722R0, valid to 18 October 2026; and ISO 45001:2018 [9], 06922S14339R0, valid to 4 January 2025. Ask BRTEC for the current certificates and check them with the issuers before relying on them. For an automotive programme, agree the buyer’s required approval documentation, control plan, measurement evidence, traceability and change-notification requirements before serial orders. Supplier qualification claims [1]

The vehicle-brand list describes applications; it does not independently establish contracts with those vehicle manufacturers. Ask for relevant, shareable programme evidence where that distinction matters.

05

Choose a fulfilment route only after confirming the actual SKU and stock.

The contact page publishes three locations. Keep contracting, manufacture, despatch and returns separate when agreeing the order. A published US address is not evidence that a specific kit is locally stocked.

Published locationAddressWhat to confirm
Yuhuan company/factory route221 Lubei Avenue, Yuhuan Economic Development Zone, Zhejiang, China.Manufacturing/audit site, contracting entity, sample dispatch and export packing.
Los Angeles contact address2060 S. Wineville Avenue, Unit C, Ontario, CA 91761.Actual function, SKU availability, dispatch responsibility and returns authorisation.
Atlanta warehouse address5815 Brook Hollow Parkway, Suite C, Norcross, GA 30071.Confirmed quantity for the exact approved reference, replenishment and delivery/returns terms.

Use [email protected], +86-576-81757685 or the dedicated contact page’s WeChat/WhatsApp +86-18989613080. Send the approved fitment and kit requirements together. Request a quote specifying sample/serial quantities, packaging, delivery origin, lead time, terms and warranty/claim procedure. Confirm these through the responsible contact before sending goods to a regional address. Actual factory and regional contacts [6]

YOUR NEXT STEP

Prepare a BRTEC wheel-end enquiry

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Official company page actually readBRTEC · company, equipment and honours ↗

    Since 2010, wheel-unit generations, catalogue/factory/equipment and certification claims; 3,600+ varieties on the current Chinese page. Certificate images are listed separately below.

  2. Official actual product detailBRTEC · 991079 ↗

    Published BMW applications, front, no kit, ABS dash and OE reference; supplier catalogue information requires fitment confirmation.

  3. Official actual product detailBRTEC · 991331AK2 ↗

    Dodge application, front, kit and ABS labels; full kit contents/approval not provided.

  4. Official actual product detailBRTEC · 991078A ↗

    Toyota application, axle/ABS/kit/OE labels as published; exact axle/application must be confirmed.

  5. Government scanned notice actually rendered and readYuhuan Science and Technology Bureau · 2020 R&D centre recognition ↗

    15 December 2020, 玉科〔2020〕32号, attachment entry25; dated development-centre recognition, not automotive product or current certificate approval.

  6. Official contact actually readBRTEC · dedicated contact and US locations ↗

    Yuhuan, Ontario and Atlanta addresses; phone/email/mobile; no SKU stock or regional contract status inferred.

  7. Certificate image linked from the official company page, actually readBRTEC · IATF 16949:2016 certificate image ↗

    Quality Austria, Brtec Wheel Hub Bearing Co., Ltd., No. 221 Lubei Avenue, Yuhuan; T-14237/0, IATF-USI CNZT2W; issued 23 February 2023, expiry 21 February 2026; without product design.

  8. Certificate image linked from the official siteBRTEC · ISO 14001 certificate image ↗

    GB/T 24001-2016 / ISO 14001:2015, 626023E10722R0, valid 19 October 2023 to 18 October 2026.

  9. Certificate image linked from the official siteBRTEC · ISO 45001 certificate image ↗

    GB/T 45001-2020 / ISO 45001:2018, Taizhou Chuanghao Hub Bearing Co., Ltd., 06922S14339R0, valid to 4 January 2025.

Report a source correction → · Return to inquiry checklist ↑

BRTEC published product scope reviewed

The manufacturer website describes automotive wheel bearings and hub assemblies.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:33

Source documentation retained for editorial review.