BearingIndex
THE BEARINGINDEX DIRECTORY

CCB

CCB is the bearing brand published by Taizhou Yongning. Its single-row deep-groove range includes application-specific clearance, closure, grease and surface-treatment options. The actual 16004 page specifies P6/Z2V2, while broader family pages list other grades. Agree the exact ordered configuration and inspection evidence instead of applying company-wide performance language to every part.

CCB · YONGNING DEEP-GROOVE BALL BEARINGS

Approve the configuration behind the precision and noise labels.

Taizhou Yongning Bearing Manufacturing Co., Ltd. (台州市永宁轴承制造有限公司) publishes the CCB brand and concentrates on single-row deep-groove ball bearings. Its company account connects the team’s experience to the former Huangyan Bearing Factory and describes nonstandard heat treatment, cage treatment and grease choices. Distinguish that manufacturing history from the current contracting entity and qualify the actual bearing offered. Official company and process account [1]

Prepare a sourcing inquiry
01

Treat the 16004 detail as its own specification.

The actual 16004 motor-bearing page lists 16004.C3, 16004.2RS and 16004.ZZ, GCr15, P6 precision and Z2V2 noise wording, with Multemp SRL, Super N or special grease choices. It does not say that every closure comes with C3 or that all listed greases are interchangeable. Obtain a complete ordered designation and controlled data sheet. 16004 detail read in browser [2]

Order fieldWhat CCB publishesWhat the buyer must freeze
Clearance and closureC3,2RS andZZ optionsComplete suffix, seal/shield construction, fits and operating clearance.
PrecisionP6 on16004; other grades on family pagesApplicable standard/edition and dimensional/running accuracy acceptance.
Noise/vibrationZ2V2 on16004Test method, bands, speed/load, numerical limits and sample/serial reporting.
GreaseNamed grease or custom optionsExact designation, fill amount, temperature/speed compatibility and change approval.

The separate ABEC5 family page lists P4/P5/P6 and multiple noise options. Its prose calls the bearing stainless while the specification table lists GCr15. Resolve the material on the order drawing and material certificate rather than copying the prose into a corrosion-resistance promise. Do not infer one precision system’s exact equivalence from a marketing heading. Actual family text and option table [3]

02

Match the shoulder and retention before substituting a catalogue row.

The actual single-page 6200-series PDF depicts OPEN, N, ZZ and2RS constructions and gives separate dimensions, load entries and “Close”/“Open” maximum-speed columns. Its 6203 row is 17 × 40 × 12 mm, Cr 9.6 kN and C₀r 4.6 kN. These published ratings are not a permissible load for every seal, clearance, grease or installation. Obtain the actual configuration and calculation conditions before using a speed or life figure. Actual PDF rendered and viewed [4]

For N/NR-style retention specify groove position, width/depth, retaining ring and housing shoulder/axial location on a section drawing. CCB’s snap-ring product page lists grease, precision and vibration options but also makes a general waterproof claim for metal shields. The page supplies no ingress-test conditions; agree the actual environmental protection requirement and validation instead. Snap-ring family publication [5]

Provide shaft/housing fits, shoulder radii, runout, clamping and thermal conditions. For motor duty include rotor loads, speed range, starts/stops, axial location and contamination; for a transmission include the mating gears, oil environment, shock and expected load spectrum. Request a written application review and sample tests for the complete assembly.

03

Define which treatments and inspections are included in your lot.

The company describes custom carbonitriding, cage strengthening and special grease, alongside automatic production/inspection, error-proofing and eddy-current testing. Ask which operations apply to your drawing, the controlled material/heat-treatment and hardness requirements, inspection stages, sampling and traceable reports. “100% inspected” on the16004 detail needs a defined characteristic and method, not an assumption that every possible property is checked. Actual process and nonstandard options [1] Model inspection wording [2]

The national standards platform lists Yongning among the drafting organisations for GB/T24606-2021, Rolling bearings—Non-destructive testing—Magnetic particle testing. The record currently marks the method standard as effective and gives implementation on 1 July2022, replacing the2009edition. Participation in drafting does not establish that every delivered bearing underwent that method or met an agreed defect criterion. Specify the component, method, procedure, acceptance criteria and report required by your inspection plan. Actual SAMR standard record [6]

The CBIA-hosted company shop identifies CCB/Yongning and its contact route. Its company-supplied testing/customer narratives are not an independent report or a current vehicle-programme approval. Where required, request actual test-centre reports, current IATF scope and customer-specific part qualification for the ordered entity/site. Actual CBIA-hosted company record [7]

04

Confirm the production site and schedule for the approved configuration.

The company introduction reports 30million bearings per year and mentions a Jiangxi factory under construction. A separate official news page dated 15June2026 says “new workshop” and “fully automatic grinding production line.” It does not establish a completed Jiangxi site, capacity increase or allocation to your model. Confirm where samples and serial parts will be made and inspected. Company site/capacity wording [1] Actual2026workshop notice [8]

Agree the approved drawing and material/grease configuration, lot marking, process controls, sample-to-serial schedule and notice before any site or process change. Request capacity and delivery commitments for your item and volumes. A factory-wide annual figure is not stock or a guaranteed lead time.

05

Send the configuration matrix to Vivian Pang before comparing quotes.

The dedicated contact names Vivian Pang, +86-15867056659, +86-576-89368593 and [email protected], at Changdian Third Village, Yanjiang, Linhai, Taizhou. Confirm the current audit/sample-receiving location, production site and legal contracting/invoicing entity. Official dedicated contact [9]

Attach the full designation, controlled drawing, loads/speeds/temperature, required precision and measured noise limits, grease and inspection plan. Ask for a quotation tied to those requirements, sample approval and serial controls, with packing, delivery, warranty and complaint-investigation terms. The official service account says manufacture follows the customer drawing or confirmation; make that confirmation explicit and revision-controlled. Drawing-confirmation service scope [1]

YOUR NEXT STEP

Prepare a CCB configuration and qualification enquiry

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Official company textCCB · company, process and service ↗

    Huangyan-derived experience, single-row range, treatments, capability and drawing-based supply; company claims scoped.

  2. Official actual page read in browserCCB ·16004motor bearing ↗

    GCr15,P6,Z2V2,C3/2RS/ZZ and grease options; exact configuration must be agreed.

  3. Official text/tableCCB · ABEC5family publication ↗

    Multiple grade/grease options and stainless/GCr15 inconsistency; not universal grade/material claims.

  4. Official single-page image PDF rendered and actually viewedCCB ·6200series PDF ↗

    OPEN/N/ZZ/2RS drawings,6203dimensions/load entries, separate speed columns; conditions require confirmation.

  5. Official product textCCB · snap-ring bearings ↗

    Retention family and options; general shield/water wording lacks ingress-test evidence.

  6. Primary current standard record actually readSAMR ·GB/T24606-2021magnetic-particle testing ↗

    Method title, dates/status and Yongning co-drafting; no automatic batch conformity.

  7. Industry association-hosted company recordCBIA · Yongning company shop ↗

    CCBidentity/contact and company-supplied narratives; no independent customer/test approval.

  8. Official dated noticeCCB · new workshop,15June2026 ↗

    Automatic grinding-line wording; no confirmed site/extra capacity/allocation.

  9. Official contact textCCB · contact Vivian Pang ↗

    LinhaiChangdian3, phone/email and contact; confirm exact receiving/contract/production site.

Report a source correction → · Return to inquiry checklist ↑

CCB published product scope reviewed

The manufacturer website describes motor and automotive ball bearings.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:33

Source documentation retained for editorial review.