BearingIndex
THE BEARINGINDEX DIRECTORY

CGJF

CGJF Jinfa publishes low-noise sealed deep-groove bearings and tapered-roller bearings with actual 6200/6300 and 30300 tables. Those tables help distinguish bore, outside diameter and ball-bearing width from taper assembled height. For motor or pump sourcing, turn the low-noise positioning into an agreed vibration/noise method, seal/grease construction and assembly validation rather than relying on a grade or coloured cover alone.

CGJF JINFA · LOW-NOISE SEALED BEARINGS AND TAPERED ASSEMBLIES

Specify how quiet the bearing must be, and under which assembly conditions.

Jinfa Bearing Co., Ltd. (进发轴承有限公司), trading as CGJF, describes low-noise sealed deep-groove and tapered-roller production. Its official introduction dates founding to 1999 and the company-name change to 2011. For motors, pumps or a tapered assembly, use the actual published model table and agree the candidate’s functional acceptance rather than turning the general low-noise positioning into a guarantee. Actual company and product focus [1]

Prepare a sourcing inquiry
01

Company facts

Checked on 30 October 2026 against CGJF’s Chinese and English pages, its certificate images and the China Bearing Industry Association listing.

ItemDetailSource
Chinese legal name进发轴承有限公司Contact page [8]
English nameJinFa Bearing Co., Ltd. (site); Jinfa Bearing Co., Ltd. (certificate)[11], [10]
BrandCGJF[1]
HistoryFounded 1999 as 台州进发轴承有限公司; renamed 浙江进发轴承有限公司 in 2003 and 进发轴承有限公司 in 2011, when registered capital became 51.88 million yuanHistory page [9]
SizeMore than 500 staff and over 40,000 m², as stated by the company; the CBIA listing says over 30,000 m²[1], [5]
AddressesContact page: No. 58 Daxijin, Jiayu Village, Zeguo, Wenling. Certificate: No. 59-1 Oufeng Road, Jiayu Village. Company page and CBIA: Chayu industrial park, Zeguo[8], [10], [1], [5]
ProductsLow-noise sealed deep groove ball bearings (6200, 6300 series) and tapered roller bearings (30300 series)[2]–[4]
IATF 16949NSF-ISR certificate CNIATF030052 (IATF 0295712), scope “Manufacturing of Bearing”, product design excluded; issued 22 March 2018, expired 18 March 2021. No later certificate is shown.Honours page [10]
Other certificatesHigh-tech enterprise certificate GR201733002637, issued 13 November 2017 for three years, now past that period[10]
Site currencyCopyright line 2018; latest news items dated 15 September 2018[8]
02

Compare the complete envelope and the meaning of the width column.

CGJF provides actual tables with millimetre units, rather than only series pictures. The following examples connect the company’s named development products to the current published catalogue; they do not establish current stock or approval for your application. Actual 6200 table, also read in browser [2] Actual 6300 table [3] Actual 30300 taper table [4]

Published designationd × D, mmPublished width/heightProcurement implication
6208-2RZ40 × 80B = 18 mmPreserve 2RZ and request the full clearance, accuracy, seal and grease specification.
6309-2RZ45 × 100B = 25 mmA named low-noise development reference; agree the actual vibration/noise acceptance for the quoted lot.
3030945 × 100T = 27.25 mmT is assembled taper height, not the ball-bearing B above; approve cone/cup, mounting and setting independently.

The 6208-2RZ and 6309-2RZ tables list speed limits of 8,500 and 6,700 r/min respectively. Treat these as published catalogue values, not permissible speeds under every load, fit, lubricant or temperature. Ask CGJF to confirm the rating basis and suitability for your complete duty. Never reuse the rating of a same-sized bearing from a different source or construction. Published 6208 row [2] Published 6309 row [3]

03

Define the bearing test separately from the installed machine result.

The China Bearing Industry Association’s company-supplied directory describes V3 and above low-noise deep-groove production and names 6309-2RZ. That is useful sourcing background, but not a batch report or a guarantee that a complete motor or pump will meet a sound-pressure target. The official introduction also names historic low-noise development projects. Actual association-hosted company listing [5] Actual development-product history [1]

Bearing acceptance

Agree the actual vibration/noise standard and edition, measured quantity/units, bands or limits, test speed/load, mounting, instrument and sampling rule. Specify whether every bearing is measured and what result is recorded with the lot.

Motor or pump acceptance

Define installed speed/load, housing/shaft fits, operating temperature, measurement location/background and the required acoustic or vibration limits. Validate representative bearings in the actual assembly and retain the approved configuration.

Supply any tonal noise, startup, temperature-rise or premature-life observations from the existing machine. Ask the supplier to assess clearance, lubricant, seals, fits and assembly effects together; the company’s noise position alone does not diagnose a failed installation.

04

A cover colour is not a controlled bearing construction.

The actual deep-groove listing includes open, “yellow cover” and “black-edge open” presentation labels, while the yellow-cover detail provides no usable seal-material or contact/friction specification. Request the drawing and full suffix definitions; do not infer dust/water protection, temperature limits or torque from colour. Actual yellow-cover detail [6] Actual deep-groove categories [7]

For a sealed motor/pump bearing, agree contact arrangement, seal material, grease product/fill, cage, radial clearance and accuracy together with speed, load, temperature and environment. Request the applicable torque, temperature-rise, leakage/contamination and life evidence for the proposed construction. A long-life or high-temperature phrase is not a candidate test condition.

For a 30300 taper enquiry, provide complete cone/cup designation, arrangement, shaft/housing fits, retention and axial loading. The published table distinguishes d/D/T and dynamic/static ratings, but does not provide your mounted setting procedure. Agree clearance/preload, matching of components and who accepts the assembled result before ordering. Actual taper dimensions and rating columns [4]

  1. Freeze the construction. Approve envelope, suffixes, seal/grease/cage/clearance or taper components and setting.
  2. Validate the candidate. Review sample geometry and agreed bearing/machine tests against defined limits.
  3. Protect repeat performance. Link lot measurements to the approved drawing and require notification before material, lubricant, seal, tooling or process changes.
05

Confirm the current production and receiving address before sending samples.

The official introduction describes historical Chayu and Jiayu development, while the dedicated contact gives No. 58 Daxijin, Jiayu Village, Zeguo, Wenling, Zhejiang. The association-hosted listing gives a Chayu industrial-park address. Confirm which current site designs, manufactures, inspects and receives your order rather than silently treating these addresses as identical. Actual historical site narrative [1] Association-hosted address [5] Actual dedicated contact address [8]

The company introduction says it works to IATF 16949:2016. The only IATF certificate on the site, from NSF-ISR, expired on 18 March 2021 and names a third address, No. 59-1 Oufeng Road. [10] Ask for the current certificate, the site it covers, and the candidate or lot test records. Historic technology honours or standards-drafting statements do not establish all present product tolerances or customer approvals. Scope of published quality/history claims [1]

The English contact page names a different contact, Olivia Wang (+86-18015895911, [email protected]), with the same office numbers. [11] The Chinese sales route names Mr Li, phone 0576-86402038 (also 89957588 / 89957988), mobile 13905863160, email [email protected]. Main switchboard: 0576-89957333 / 89957336. Ask for the engineering/quality contact, controlled proposal, quantity, lead time, lot records and warranty; do not treat an older directory contact as the confirmed current owner of your request. Actual sales and switchboard contact [8]

YOUR NEXT STEP

Prepare a CGJF low-noise or tapered-bearing enquiry

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

71 model records
Model / bearing familyManufacturerBore dOutside DWidth B / T / LDetails

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Official actual company/range/historyCGJF · actual company introduction ↗

    Low-noise focus, named development references and historical sites/quality claims; current scope needs evidence.

  2. Official actual table; also read in browserCGJF · 6200 series dimensional table ↗

    Complete 2RZ designations, mm dimensions and published speed limits; rating conditions/application approval not established.

  3. Official actual tableCGJF · 6300 series dimensional table ↗

    6309-2RZ envelope and catalogue values; not a current lot performance certificate.

  4. Official actual dimensional/rating tableCGJF · 30300 tapered series table ↗

    Assembled T versus ball-bearing B; mounted setting and component compatibility require approval.

  5. Association-hosted company-supplied listing actually readCBIA · Jinfa company directory ↗

    V3-positioning, named 6309 and older Chayu address/contact; not independent batch testing or current address confirmation.

  6. Official actual product detailCGJF · yellow-cover presentation ↗

    Presentation label without complete seal/friction/material specification.

  7. Official actual category listCGJF · deep-groove categories ↗

    Series and open/colour-labelled alternatives; not interchangeable construction or stock.

  8. Official actual contact pageCGJF · dedicated sales contact ↗

    Mr Li, sales/switchboard numbers, email and No. 58 Daxijin, Jiayu address; current engineering/receiving assignment requires confirmation.

  9. Official history pageCGJF · development history ↗

    1999 founding as 台州进发轴承有限公司 (1.08 million yuan), 2003 and 2011 renames, 2008 ISO/TS 16949, 2014 national high-tech enterprise. Read 2026-10-30.

  10. Official certificate imagesCGJF · honours and certificates ↗

    IATF 16949:2016 NSF-ISR CNIATF030052 / 0295712, Manufacturing of Bearing, design excluded, 2018-03-22 to 2021-03-18, address No.59-1 Oufeng Road; high-tech enterprise GR201733002637 (2017-11-13). Images uploaded 2018. Read 2026-10-30.

  11. Official contact pageCGJF · English contact page ↗

    JinFa Bearing Co., Ltd.; Olivia Wang, +86-18015895911, [email protected]; No.58 Daxijin, Jia Yu village, Ze Guo Town, Wenling. Read 2026-10-30.

Report a source correction → · Return to inquiry checklist ↑

CGJF published product scope reviewed

The manufacturer website describes low-noise ball and tapered roller bearings.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:33

Source documentation retained for editorial review.