BearingIndex
THE BEARINGINDEX DIRECTORY

CHL

CHL / Ningbo Wanfeng: low-noise motor bearings, ceramic-ball inquiries and a guide to the evidence behind those choices.

CHL · NINGBO WANFENG

Qualify the motor bearing in the motor it will serve.

Ningbo Wanfeng presents CHL as its brand for small low-noise motor bearings, with applications in appliances, power tools and automotive equipment. Company introduction [1] Its product menu separates the 60, 62, 63, 68 and 69 families, a “green high-end” range, non-standard products and ceramic-ball bearings. Product navigation [2] Those categories are a starting point for a technical discussion, rather than an approved replacement list.

Prepare a sourcing inquiry
01

A quiet bearing needs a measurable assembly requirement.

CHL’s official introduction emphasises low-noise motor bearings and names appliances, high-speed power tools and automotive use. [1] The following questions are our suggested qualification approach; the application names do not establish that any particular CHL part meets your duty.

Your applicationExplain the operating conditionAgree the acceptance evidence
Appliance or small motorInstalled fits, mounting method, working temperature, starting cycles and the noise that matters to the end user.Define bearing-level vibration/noise measurement and the separate assembled-motor test. Record the grease and clearance variant used for samples.
Power or garden toolSpeed range, intermittent operation, shock/loading history and exposure to dust or moisture.Ask for a proposed closure and lubricant, operating limits, and an agreed test cycle that represents the actual tool.
Automotive motor projectExact component, drawing revision, customer requirements and traceability needs; do not submit only “automotive”.Identify the manufacturing site, current quality-system scope and the product-approval records required by your customer.

The company describes a Φ4–Φ40 small-bearing range, but the introduction does not define that notation’s dimension basis. Confirm the actual bore, outside diameter and width from a controlled drawing instead of treating it as a complete size specification.

02

Ask which published inspections cover the selected bearing.

The quality page lists automatic inner/outer-diameter, height, radial-clearance, missing-rivet/ball imaging, DVT/S910 noise/vibration, grease-weight, eddy-current and surface-image checks. [3] This is a useful list of questions for an inspection plan, not a report showing that your sample or delivery passed.

Geometry and clearance

Identify the drawing limits and agreed measuring method. Ask which checks run on the selected line and whether results are recorded for every part, a sample or the batch. Request traceable sample results before agreeing serial acceptance.

Grease and acoustic performance

Specify the lubricant and fill requirement together with the test conditions and limits for noise/vibration. Ask how grease-weight control and acoustic testing connect to lot traceability. A description of equipment alone leaves the pass/fail criteria open.

Material and surface screening

Ask which rings/components undergo eddy-current or imaging checks and what defects the method addresses. Request the agreed material and heat-treatment evidence separately; do not treat a surface check as a substitute for those properties.

How should I handle the quality-system claims?

The official company page names IATF 16949, ISO 9001 and ISO 14001. This review has not verified current certificate numbers, expiry or site scope. Ask for the certificate matching the offered manufacturing entity and site, and verify it through the applicable issuer before relying on it.

03

“Ceramic ball” does not define the entire bearing.

CHL has a dedicated ceramic-ball bearing category, but its category text does not give a complete specification for ball grade, ring material, cage, grease or operating limits. [4] Keep this inquiry distinct from the standard steel-ball variant.

Make the construction explicit

Ask whether the offered design uses ceramic balls with metallic rings, and obtain the material designations for both. Confirm the cage, closure, clearance and lubricant. Do not infer a fully ceramic construction or a guaranteed electrical-insulation performance from the category name.

Define the reason for changing

Explain whether your objective is speed, thermal behaviour, an electrical concern or another measured problem. Ask CHL to state the proposed part’s limits and the evidence supporting that use. Compare samples under the same assembly and duty conditions.

04

Keep the product name separate from the carbon evidence.

The catalogue includes a “CHL green high-end” series. [2] A separate official news item, dated 27 September 2022 in the site’s news listing, reports a product carbon-footprint evaluation and a unit figure of 75.71 g CO₂. [5] The short announcement does not provide the product identifier, calculation boundary or full assessment report.

For environmental procurement requirements, ask for the assessment report, covered product, functional unit, reporting period, method, boundary and any verification evidence. Do not apply the old figure to all present CHL products or use the series name as proof of a current lower-carbon order.

The China Bearing Industry Association’s member-list record names Ningbo Wanfeng Bearing Co., Ltd. at Zhouxi Road 328, Zhouxiang, Cixi. [6] Use this association record alongside the official company identity when confirming the supplier; membership is not product certification. Ask which legal entity and site will make and invoice the selected bearing.

The official introduction publishes factory and monthly-capacity statements without a clear current reporting date. This guide does not convert those statements into available output, delivery promises or an independently audited capacity.

YOUR NEXT STEP

Prepare a CHL motor-bearing qualification brief.

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

0 model records

No documented models yet.

Try broader requirements, or explore the manufacturer’s published product scope.

Explore manufacturers →

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Manufacturer publicationCHL · Ningbo Wanfeng company introduction ↗

    Company/brand identity, motor-bearing focus and certification claims; undated scale statements are not current available capacity.

  2. Manufacturer catalogueCHL · official product navigation ↗

    Published series/category names; no assurance that every variant is stocked or qualified for an application.

  3. Manufacturer publicationCHL · quality management ↗

    Listed automatic inspection methods; no customer sample, batch report or line audit reviewed.

  4. Manufacturer catalogueCHL · ceramic-ball bearing category ↗

    Ceramic-ball product category; detailed construction and performance remain to be confirmed for the offered part.

  5. Dated manufacturer announcementCHL · product carbon-footprint announcement ↗

    2022 announcement, with limited public scope detail; not a current product-specific carbon declaration.

  6. Industry-association recordChina Bearing Industry Association · member list ↗

    Named company and recorded address; membership does not verify product performance or current certificate scope.

Report a source correction → · Return to inquiry checklist ↑

CHL published product scope reviewed

The manufacturer website describes miniature motor bearings.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:33

Source documentation retained for editorial review.